Update the profile of UCS after adding vNIC?

Similar Questions

• I managed to see the profile of the artist in Apple's music. How can I update the profile picture?

  I managed to see the profile of the artist in Apple's music. How can I update the profile picture?

  This is a user forum. No Apple itself is allowed to answer your questions here.

  You are probably better contact Apple Support directly to get an answer to your question.

• Try to spend XP to W10. Tried to copy the content of the profile (IE not the profile itself) immediately after installation but no joy.

  Try to get an old laptop XP to a new computer laptop of W10 thunderbird.
  Located existing profile and backed up on external hard drive.
  Thunderbird installed on W10 and before breakfast copied the contents of the old profile folder to the profile under AppData/Roaming/Thunderbird/Profiles/profile.default folder
  Launch thunderbird and it does not recognize the profile, it is as if she is trying to set it up from scratch.
  Then tried to create new profile and copying the contents of the old profile of XP, but it did not work.
  Then looked at the Add-ons, but the lightning it is not present, so could not remove it.
  Any other suggestions?

  C:\Documents and Settings\Fraser\Local Settings\Application Data\Thunderbird\Profiles\elvh5ttl.dfault

  This is not the path of the correct profile for XP.
  Check this article and make sure that really copy you the profile folder.
  http://KB.mozillazine.org/Profile_folder_-_Thunderbird#Windows_2000_and_XP

  I do not understand why you created a second profile. With two profiles, you must always be careful to start Thunderbird with the right profile.

• White screen to update the Portege M400 firmware after waking from sleep state

  Why this topic has been closed? http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19803&MessageID=74193

  I just wanted to add that this update does NOT resolve the problem in vista and it is NOT a driver problem. The update will not install in vista and vista is already provided with videoprt.sys 5.1.2600.2911.

  When it occurs, the laptop again indeed. You can manipulate and even hear the sounds, but the backlight does not come on or there is no output from the video card. I'm fairly certain that it is a signal of hardware problem.

  No matter what laptop I, euro or us, could someone please tell me the file so that I can look at what changes actually code?

  Hello

  > Why this thread has been closed?
  I think that the admin closed this thread because, as indicated by the user lumix2day the MS update has solved this problem.

  The M400 was delivered with Win XP it's why the update should work with Windows XP!

  Regarding your question.
  Looks like you are using your own copy of Vista on the M400.
  You should check if Vista is already up to date. Each week the new MS updates are published.

  Additinally, I recommend updating the BIOS and check for a driver update more recent display!

  Best regards

• The ADF tree fades after adding a button after the tag from the tree of the ADF

  I have a tree ADF that will have a few Groups (parent) and issues (child), it displays the content properly, now I have to add a button at the end of the page, so when I added a button on the page is shrunk and I see two bars vertical and horizontal scrolling for the part Questions and groups. but I want the content to be displayed correctly, and at the end the button should available.
  
  I tried width ADF Stretch and addition of the tree and the key to all the different types of components, but they did not work.
  
  Can you please suggest me a way to do this?
  
  The jsp page looks like this:
  
  < af:form >
  < af:tree - >
  < f: facet name = "nodeStamp" >
  
  < af:outputText value = "#{node." GrpDesc}"id ="ot1">
  
  < af:outputText value = "#{node." QstnDesc}"id ="ot2">
  
  
  <!- and I have a few components of selectOneRadio here, which will be displayed for each question >
  
  < / af:tree >
  
  <! Here, I added a button and I have actions defined for it >
  
  < text af:commandButton = "save and continue".
  ID = "cb2" / >
  
  < / af:form >
  
  
  
  
  
  
  Thank you
  Jean Lou
  
  Published by: user12217808 on April 27, 2012 04:55

  Before adding a status bar button, you will need to place a toolbar item.

  PanelCollection is a naming container. If you try to access your tree by ID, you need to add ID of panelCollection and: entry. As "tree1"-> "pc1:tree1".
  I think that panelCollection itself cant' break the queried data.

• What is the best way to update the references to file after a move?

  I have a Photoshop Elements catalog picture with about 25 k images all pointing to a network share I call \\thehive. I moved, or sync'd if you want, all the files in the network share \\thehive on a drive of local storage for better performance, which is now located on P:\ drive. I intend to treat the P drive as my main drive that reads the catalog and use \\thehive network simply as a clone of the P drive that I intend to keep in sync with SyncToy. I have already all this configuration in place, the files are sync'd on the drive P and \\thehive, everything works as expected so far. But how to do to update the catalog so that it starts from the P drive instead of the \\thehive? A photo today points to \\thehive\2008\somepicture.jpg, and I need to point to P:\2008\somepicture.jpg.

  I'm a very advanced computer user, I could edit an XML file or do some advanced operations not supported if I had to. Would appreciate your thoughts and suggestions.

  The fastest way is to directly edit the values in the catalog.pse9db database.  The database is a database SQL Lite, so if you know (or know someone who knows) how to run SQL queries against a database, you have the chance because Adobe has done a great job of a highly normalized database schema design.

  I highly recommend this tent first on a copy of your database.  In general, the procedure goes like this:

  1. Add one of your images on the P: drive in the catalog.  This establishes a list for the P: drive and its identification in the volume_table table.
  2. Run a SQL query on the table of volume_table to see a list of all the lines.
  3. Note that the values in the column 'id' for your volume "the thehive" and one "P:".
  4. Run a SQL query on the media_table table to update the value of the id_volume column, replace all instances of the id number "the thehive' with the identification number of the reader"P: ". The SQL query will look something like this:

  Update media_table

  Set volume_id = "."

  where volume_id = "."

  I tested with PSE9.0.3 on Win7, changing the location of a CD on my E: drive on a USB on my F: drive.

  Good luck!

  Ken

• Only the 5 songs play after adding them to run the slide show

  Original title: using Windows Movie Maker

  I created my slideshow (duration 17 minutes) and you have downloaded 5 songs to play. Only the first song will play and he puts down the rest of them. I can change the order and whatever song I first play but no song after that... help please!

  http://myvideoproblems.com/tutorials/VersionNumber.htm

  Maybe he did not do a good job of conversion, and/or MP3, it does are not compatible. As you have not said what converter you used I don't know if you can choose wav as an output option. :)  Use the help file to find out. Otherwise, use another converter of the change to wav, freemake is good as audacity.

  http://myvideoproblems.com/webpages/UsefulProgrammes.htm

  You did not say what type of file, the images are.

  The fact that a song plays and other shows incompatibility.

• Impossible to update the app already released after generation phonegap

  Hi, I have an application already published to the app store, I built it with Ionic cli, then I changed to phonegap build, the app works, but when I try to update my old version, an error: "Application not installed", so I deleted the old version, then installed a new and he moved, then I go to the game store and when I get to my published application It is said to be updated, as if the new version is older, but I have more versionCode and version, what could be the problem here?

  PD: when I build with Ionic cli works fine, I can update an old man, but I prefer to build with phonegap for convenience of time.

  Increase your versionCode android at least 101009, then it should work.

  I still don't understand why the versionCode suddenly does not add the '8' in the end... Is somehow possible to know why the change was made and if it will work this way in the future? Someone must have changed in BMP :-) And: What is the difference between android-versionCode and versionCode (such as attribute widget)?

• Problem with the game of content after adding an effect to fly a form like a button

  Hello

  I created 3 shapes like buttons. They are the fly-in on the stage separately, one by one. The problem is that just before they fly-in they pop up for the second half, then disappear and fly-in as it was programmed.

  I discovered, that when 'use as button' option is off, everything is fine. Just fly-in such forms as requested. But what 'use as button' is turned on then Cp behaves as described above.

  None of had similar problem? If anyone of you can replicate it?

  As a workaround you could fly in shape (and not as a button) and then cover it with the same shape as the button when the effect is complete.

  Not very elegant but...

• update the drivers of yoga are very old?

  I have laptop 2 13 Yoga...

  I have downloaded/installed new driver for my laptop from lenovo.com

  Once installed (driver genius proffesional)... When the scanner for the new driver gives me 9 new update for the driver

  then installed (drivermax) to verify that this driver are in need of an update and it also gives me 9 update to the same drivers...

  Yet once I open my computer cell phone supprt page and copmare drivers version with versions of drivermax me game...

  I found this version of drivermax drivers are more recent than the laptop support page

  Why the lenovo is too slow for the update to the new version?

  First of all, get rid of drivermax. I have tried in the past and it is not all it is cracked up to to be.

  Drivers Lenovo provides are tested to work with combinations of material not only a single chip.

  For example, the video chip may have a dozen drivers on its own. But you add to it a certain processor and the number drops to 3, add a certain audio chip and drops numbers 1. You may be able to get other drivers to work, but they can cause a problem with other hardware on your computer. It is not that Lenovo is slow to update the drivers, is that after a period of time that certain combinations of materials are no longer used because they got too old. This can happen after a very short period of time.

• Problem of JMS deployment plan for updating the JNDI names

  Hello everyone, I am working on Oracle SOA 12 c on a 2-node cluster environment. I am facing problem update the JNDI for jms adapter deployment name. I created jms, jms module and Distriubuted queues and manufactures servers connections. When I create jndi say ' ist/xx/jmsqueues' name in the adapter to jms under deployment and update the name of the connection factory against property connection factory in JNDI eis/xx/jmsqueues name.  After that I updated the resource with the location of the plan in respect of the group path. But the problem after activation of the changes the created "eis/xx/jmsqueues' disappearing off the coast, but when I check the information contained in the plan, I see the details of name and jndi connection factories. To make sure of my setup works very well, I do use the jndi name say HIA/ws/queues existing and update the factory connections. After the test, I was able to publish the message to the queue. The only problem I see with new jndi names and for that reason I am not able at all tasks related to the queues. I really appreciate if some light here. Best regards, TJ.

  Try the cancellation of the deployment of the JMSAdapter.rar and install it once again from the location below:

  $ORACLE_HOME, soa, soa, connectors

  Try to target them to regroup and try to do what you do.

  When the JMSAdapter is corrupt or plan is not created correctly, we see this odd behavior. You can try this and check.

  Concerning

  Pavan

• Issue update to profile Applications SSO Login Types of backend option

  Hello

  That's stupid questions, as I am unable to update Applications SSO Login Types profile backend value option also not sure if the option value profile which is been updated is the same as "s updated!

  While integrating the R12 EBS OID 11g that I need set these profile option in backend EBS

  1 the profile option 'Applications SSO Type' to 'SSWA w/SSO.

  2 the 'application SSO Login Types' profile 'External' option (or BOTH).

  3. the "Application SSO Auto Link User" profile option on 'Active '.

  4. the profile option ' SSO Applications enable identity OID add the event ' on 'Active '.

  Someone please prcisely could say how update the profile above options backend values.

  When I ran this query.

  Update fnd_profile_option_values
  Set profile_option_value = "SSWA_SSO".
  where PROFILE_OPTION_ID in (select PROFILE_OPTION_ID from the fnd_profile_options where PROFILE_OPTION_NAME = 'APPS_SSO')
  and level_id = 10001 and profile_option_value! = "SSWA_SSO";

  
  

  It returns the result 1 line update.

  Not sure if the expected value and has updated it or not...

  
  

  When I try to update Aapplications SSO Login Types ' profile option for 'External' (or BOTH). by running the following query

  SQL > Update fnd_profile_option_values
  Set profile_option_value = "BOTH".
  where PROFILE_OPTION_ID in (select PROFILE_OPTION_ID from the fnd_profile_options where PROFILE_OPTION_NAME = 'APPS_SSO_LOCAL_LOGIN')
  and level_id = 10001 and profile_option_value! = "BOTH";

  
  

  Display: 0 line update.

  Not sure why!

  
  

  When I ask the table fnd_profile_options to determine what value of column level_id...  It does not exist in fnd_profile_options

  Could you please say what level_id in means of query above. I assuem its level value site but unable to check it out because I can't access the OAM or frontend Apps.

  
  

  
  

  Is also one of the involuntary command which is executed

  SQL > update fnd_profile_option_values
  Set profile_option_value = "BOTH";

  
  

  It ended with the release of more of 4200 lines update.  Since this, the instance of mink but requires no corrective measures?
  

  
  

  
  

  Thanks and greetings

  Priya

  You should add 'START' in the line before "DBMS_OUTPUT. DISABLE; ».

  If you copy / paste the code I posted above, it should work.

  Thank you

  Hussein

• DataControl POJO have not updated the results

  Hi all
  my version JDEV is 11.1.1.5
  
  I have a POJO as below
  Class Test {}
  private list ArrayList = new ArrayList();
  Test () {}
  popultaeList();
  }
  {popultaeList()}
  list of poplautes here
  }
  Setter and getters for the list
  }
  
  created data control top and additional list as choice selectmany.
  
  I have 2 pages in firstpage that I update the list .assuming I have added 2 new items to the list now I sail on the second page where I dropped the list as selectmanychoice
  
  now the problem is selectmany choice in the secondpage becomes list update only on fresh demand. (hitting the URL in the browser).
  
  I debugged the issue, because I am filling Test list contrsuctor.this constructor only calls on fresh demand.
  
  Can anyone tell how to get the update here list?
  I tried to refresh ifNeeded itarator but no luck
  
  You kindly help me.
  
  appreciate your help
  
  Thank you
  Karnakar

  Implement a public method in the pojo that calls the popultaeList() method. Then, you can call the public method of the pojo while accessing the second page.

  Timo

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• After update to 5.0.15 server, can not activate the OD service and the Profile Manager

  Hi, I have recently updated my Server 5.0.15 under El capitan 10.11.3.

  After that, Service OD and the Profile Manager can be activated server GUI.

  Of course, all users on my network are missing from the list of users; just local users remain.

  Reason: cannot be connected to the node 127.0.0.1

  How can I recreate an OD without use of app server?

  Thank you.

  P. S.

  Of course, even in the local server translates users preferences pane not connected.

  Many Open Directory problems can be solved by taking the following measures. Please test after each of them that you have not already taken it and back up the data before making any changes.

  1. the OD captain must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; for example, Ethernet and Wi - Fi.

  2. you must have a working DNS serviceand the host name of the server must match the FQDN name. To confirm, select the server by its name in the sidebar of the window of the server application, and then select the Preview tab click the button change on the host name line. The access that your sheet of server, the domain name must be selected. Change the host name, if necessary. The server must have at least three levels (for example, "server.yourdomain.com") name, and the name must not be in the top-level ".local" domain, which is reserved for Hello.

  3. the main DNS server used by the server must be itself, unless you use another internal DNS server. The only DNS server on the clients should be internal, they should get from the DHCP server, as appropriate.

  4. If you have accounts with basic network directories, make sure that the URLS are correct in the user settings. A return status of 45 from the demon authorizationhost in the newspaper may mean that the URL for the installation directory was not being updated after a change in the host name or the file sharing protocol (AFP, SMB, or vice versa.) If the server and the clients run all OS X 10.10 or later, directories should be shared using SMB instead of AFP.

  5. follow these instructions to recreate the Kerberos configuration on the server.

  6. If you use authenticated connection, check the validity of the certificate of the master. The common name must match the host name and domain name. Unselection and then reselect the certificate in.app was reported to have an effect in some cases. Otherwise, delete all certificates and create new ones.

  In the case of a self-signed certificate, create a trust profile in the Profile Manager and deploy it to the customers. On the server, you may need to create the folder

  /etc/openldap/certs

  and place a copy of the certificate of the server, for example:

  /etc/openldap/certs/server-name

  Also add a directive to the file

  /etc/openldap/ldap.conf

  of the form

  TLS_CACERT /etc/openldap/certs/server-name

  7 remove the link, then to connect customers in the preferences users and groups window. Use the FQDN of the master name.

  8 restart the master and clients.

  9. do not connect you to the server with the account of the user of a network.

  10 turn off the internal firewall in use, including third-party "security" software

  11. If you have created replica servers, remove them.

  12. If OD has recently stopped working while it was working before, you can be able to restore automatic backup in/var/db/backups, or a snapshot of the time of this backup Machine.

  13. If there is slapd errors in the log, try the following steps.

  Disable the Open Directory in the server application.

  Enter in a shell:

  cd /var/db/openldap

  sudo -s

  db_recover -c -h authdata

  db_recover -c -h openldap-data

  Turn on Open Directory.

  14 reset database password strategy:

  sudo pwpolicy -clearaccountpolicies

  15. as a last resort, export all users od. In the Open Directory of the server pane, delete the OD server. In some cases, you may need to use the shell to remove the server. Then recreate it and import the users. Make sure that the UID is in the range 1001 +.