Host to the target tables
I'm trying to transfer a picture of the LabVIEW host program to the target in real time on a cRIO.
I'll set up a controlled loop that transfer values one via shared Variables.
It works fine when I run running to highlight.
However, if I have both allow to run at full speed, something goes wrong
and the size of the array ends correctly on the target.
Is there some tricks on how to transfer tables down
host to the target, or all the other pitfalls I should be aware when
work on a real-time target?
And Yes, I never took the course of the RT, so there might be some vital info miss me.
Martin
Hi Martin,
Why don't you use a SharedVariable taking a picture? Why can you transfer data one by one?
Tags: NI Software
Similar Questions
-
ODI 12 c: IKM for differential insert and update with a sequence in the target table
Hello
I have a map where I fill in a column of my target table using a database sequence. Now my mapping is supposed to load the target gradually table. So I need a revenge for update and incremental insert. Now with this differential IKM it compares all the columns to match all colmuns line to understand, it should be an insert or update. Now, the following code shows that when the ROW_WID is loaded with a sequence of database.
If NOT EXISTS
(select 1 from W_LOV_D T
where T.ROW_WID = S.ROW_WID
and ((T.CREATED_BY = S.CREATED_BY) or (T.CREATED_BY IS NULL and S.CREATED_BY IS NULL)) and
....
....
< the rest of the comparison of columns >
)
So when running ODI returns following error
Caused by: java.sql.SQLSyntaxErrorException: ORA-00904: "S". "" ROW_WID ": invalid identifier
Please suggest if there is no other IKM I should use or if there is another way around it without changing the code IKM...
Hi Marc,
Thanks for your reply.
I had solved it. The incremental update process inserts all rows from the source table to I$ table that exists in the target table. It does so by the where sql such as mentioned in my questions as
WHERE THERE is NOT (
. COLUMNS = -
The logged data is not loaded in the target table in cdc-compatible?
Hello
I tried with cdc-simple concept on single table.
I had loaded, journaled table (only changed records) inserted in the simple target in cdc table. Its working fine.
When I work on cdc-consistent and logged data are not loaded in the target table
For this, I used the data model, it has 3 data stores. log the without option of data, its works very well.
When I am trying to load tables logged in the target table in interface, its running fine.
To do this, I chose "logged data only.
Although I have not changed the records in the target table. target table is empty after the executed insterface.
I chose the real option of insertion in ikm. But the logged data that is not inserted in the target table.
Please help me.
Thankin advacnce,
A.Kavya.
Hello
You must EXPAND WINDOW and LOCK SUBSCRIBERS before consuming the CDC data:
http://docs.Oracle.com/CD/E14571_01/integrate.1111/e12643/data_capture.htm#ODIDG283
Subsequently, you unlock Subscriber and purge the log.
Better to put a package to automate the whole thing.
-
Failed to truncate the target table while programming the interface in ODI
Hi Expertise,
I developed a scenario in an interface, where I planned keeping the option Truncate as false, right there the data is been going to target without any problems, but when I changed the status of truncate to TRUE, the interface is been run, but the array is not get truncated, rather the data's been loading again to target. (when running manually, the target table is been truncated perfectly) but not in programming.
Can someone help me in this problem.
Thank you
Shakur.
Have you regenerate the scenario in question since you changed the option Truncate. If you have not the regular job must still run the old code
-
How to MERGE when the target table contains invisible columns?
Oracle running on Oracle Linux 6.4 12.1.0.2.0 database:
During his studies of FUSION with invisible columns, I discovered that invisible columns in the target table cannot be read. Workaround seems to be
MERGE INTO (SELECT <column list> FROM <target table>) AS <alias>
However, the documentation does not seem to allow this. Here are the details.
Test data
> CREATE TABLE t_target( k1 NUMBER PRIMARY KEY, c1 NUMBER, i1 NUMBER invisible ) table T_TARGET created. > INSERT INTO t_target (k1,c1,i1) SELECT 2, 2, 2 FROM dual UNION ALL SELECT 3, 3, 3 FROM dual UNION ALL SELECT 4, 4, 4 FROM dual 3 rows inserted. > CREATE TABLE t_source( k1 NUMBER PRIMARY KEY, c1 NUMBER, i1 NUMBER invisible ) table T_SOURCE created. > INSERT INTO t_source (k1,c1,i1) SELECT 1, 1, 1 FROM dual UNION ALL SELECT 2, 2, 9999 FROM dual UNION ALL SELECT 3, 3, 3 FROM dual 3 rows inserted.
First try
Please note that I have a WHERE clause in the WHEN MATCHED clause. Its purpose is to avoid the update of a row when data are already correct. The WHERE clause is trying to read the invisible column of the target table.
> MERGE INTO t_target o USING ( SELECT k1, c1, i1 FROM t_source ) n ON (o.k1 = n.k1) WHEN MATCHED THEN UPDATE SET c1=n.c1, i1=n.i1 WHERE 1 IN ( decode(o.c1,n.c1,0,1), decode(o.i1,n.i1,0,1) ) WHEN NOT MATCHED THEN INSERT (k1, c1, i1) VALUES(n.k1, n.c1, n.i1) ... Error at Command Line : 10 Column : 12 Error report - SQL Error: ORA-00904: "O"."I1": invalid identifier
As you can see, I put a subquery after the USING clause so that 'n.i1' would be 'visible', but this is not enough since the 'I1' column in the target table is always invisible.
Second test
> MERGE INTO ( SELECT k1, c1, i1 FROM t_target ) o USING ( SELECT k1, c1, i1 FROM t_source ) n ON (o.k1 = n.k1) WHEN MATCHED THEN UPDATE SET c1=n.c1, i1=n.i1 WHERE 1 IN ( decode(o.c1,n.c1,0,1), decode(o.i1,n.i1,0,1) ) WHEN NOT MATCHED THEN INSERT (k1, c1, i1) VALUES(n.k1, n.c1, n.i1) 2 rows merged.
Here I used a subquery in the INTO clause thus, and it worked.
Unfortunately, this does not seem to be admitted in the documentation: IN fact refers to a table or a view as schema objects.
My question is:
How can I refer to invisible columns in the target table without creating a new object? My workaround using a subquery solution seems to work very well, but can I recommend if it is not documented?
Can I replace a "inline view" for a view and still be supported?
During his studies of FUSION with invisible columns, I discovered that invisible columns in the target table cannot be read. Workaround seems to be
However, the documentation does not seem to allow this. Here are the details.
Here I used a subquery in the INTO clause thus, and it worked.
Unfortunately, this does not seem to be admitted in the documentation: IN fact refers to a table or a view as schema objects.
My question is:
How can I refer to invisible columns in the target table without creating a new object? My workaround using a subquery solution seems to work very well, but can I recommend if it is not documented?
Can I replace a "inline view" for a view and still be supported?
But the documentation DO ALLOWS not only! You use a view - a view online and those that can be changed in a MERGE statement.
All versions of the doc for FUSION since 9i specifically say this:
INTO clause
Use the
INTO
target clause to specify the table or view you are updating or inserting into. To merge the data in a view, the view must be updated. Please refer to the "Notes on the editable views" for more information.Here are the links for the doc. 9i, 10g, 11g and c 12, ALL OF THEM (the last three), except 9i have this EXACT clause above.
SQL statements: INDICATED to ROLLBACK FALLS, 15 of 19
http://docs.Oracle.com/CD/B19306_01/server.102/b14200/statements_9016.htm
http://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_9016.htm
https://docs.Oracle.com/database/121/SQLRF/statements_9016.htm
9i doc does not have this specific quote in the INTO clause section, but it doesn't have that quote a little later:
Limitation of the update of a view
- You cannot specify
DEFAULT
when refreshing a view. - You cannot update a column referenced in the
ON
condition
clause.
merge_insert_clause
The
merge_insert_clause
specifies the values to insert into the column of the target table, if the condition of theON
clause is false. If the insert clause is executed, then all insert triggers defined on the target table are activated.Restrictions on the merger in a view
You cannot specify
DEFAULT
when refreshing a view.If your "workaround" isn't really a workaround solution. You SHOULD use an inline view if you need to reference a column "invisible" in the target table, since otherwise, these columns are INVISIBLE!
My workaround using a subquery solution seems to work very well, but can I recommend if it is not documented?
You can recomment it because IT IS documented.
- You cannot specify
-
GET A DATE THE TARGET TABLE MAX
Hello friends,
Can someone tell me how to extract the date max of the target table.
Thank you.Azhar
Sorry why again once you are not able to use the aggregator operator to get a max value. You don't need a group of when taking a max value what from a table, unless otherwise specified
Try it with a simple table b table card
table (several itemno)
table b (number maxitem)
Use aggregator and don't put anything in the section of owb agg transformation group. Generate the code and take a look
-
delete all, then insert into the target table, two steps in one transaction?
Hello
We have the following two steps in one ODI package, it will be managed in a single transaction?
procedure step 1): remove all of the target table.
interface in step 2): insert data in the source table in the target table.
our problem is that step 2 can take some minutes, and then the target table can temporary unusable for end users who try to access it, I'm good?
Kind regards
MarijoHello
It can be managed in a single transaction by selecting IKM as the Append and TRUNCATE/DELETEALL Option command in the FLOW of an interface tab.
Thanxs
Malezieux -
Add records in the target table
Hi all
I HAV done an interface for a simple source data transfer to the target. When I run it, the records are stored in the target table. Now, I want to launch the interface (for the same or different source table) and add the records to existing records in the target table.
Kindly guide me, explaining how shud I do the addition in the target table.
Thanks in advance.Hello
You can use the IKM control add... it will add records...
Thank you.
-
OWB, I need to update the target table with the same field for game/update
OWb, I try to update the target table with the game and the update on the same ground is this possible. I'm a match merge error indicating that you cannot update and match on the same ground. But in SQl is my selection
Update table
define RFID = 0
where RFID = 1
and ID_processus = 'TEST '.
Can HWO I do this in OWB.I have check but in the case later (last one) that he warns no error if you can go with it.
and I tested it it worksYou can check the first case (from where we start) if it has been warned and then try to run.
-
ODI 12 c: do I have to reimport the target tables after that I did some clues on them
Hello
I created a map after import target tables in my ODI 12 C studio. The mapping is complete and it works without any errors. Now I intend to create some clues that I have an obligation to report. SO, I have to reimport these after creating indexes.
Thank you
SM
Hello
Here's the thing. The indexes that you created, if you plan to use as a unique index, or as your key to updating ODI you can go ahead and add the template manually in or hit the table again. However, if these indices are purely to make your report more quickly and will have no impact on you data loading then it is pointless to ODI. In the future when you make changes to the table and refresh it in ODI indexes will be added automatically.
Thank you
Ajay
-
Query metadata ODI to find the source and the target table for Interface
Hi Experts,
Customer heading there source of EBS 11.5.10 in R12. They are BIApps ODI. 7952 version. Since then, all mappings there are customized they may not disturb on support of Oracle BIApps is concerned.
Now, we need to know how many ODI mappings there source EBS is the 11.5.10 in R12 migration and we can only target mappings accordingly.
So, please give me with entries below:
(1) any request for metadata that will give me the information of the source tables table and target them in against an if-same interface that the source of the main interface is another interface.
(2) what are the other stuffs that I need to look at from the point of view of the mapping changes when the source is upgrading.e.g. only change the source table is enough or I need to focus on other animals. I feel she's boiling down to create a separate source for R12 adapter.
Kind regards
SnehotoshFirst open the designer-> models and check which model has got the mapping of the eBS. Get this code with this TERRIBLE application
SELECT count (distinct i_pop) of SNP_POP_COL
where I_POP_COL in
(
Select i_pop_col in the SNP_POP_MAPPING where i_source_tab
in
(
Select i_source_tab in the SNP_SOURCE_TAB where i_table in)
Select i_table in the SNP_TABLE where I_MOD in
(select i_mod in the SNP_MODEL where mod_name = "PUT_HERE_YOUR_NAME")
)
)
);Will not consider some other influence (i.e. the procedure), it will be an indicator of average first level.
-
Insert generic value in the target table
Hi all
I'm loading of data from source to target table orcle...
I would like to load one of the columns target with a big generic unique number that does not come from source...
the number in the target column should be likw...
35343834393533363533343934323539,
35343834393533363533343934323540,
35343834393533363533343934323541,
35343834393533363533343934323542,
35343834393533363533343934323543,
35343834393533363533343934323544
Concerning"" "You're almost there. '"
Please use capital letters when you access oracle objects.
< %="odiRef.getObjectName" (« l »,="" « xref_data_sequence »,="" « d »)="" %="">.nextval
This works...
-
Array.Shift () sets the target table AND any referenced by table
I have a class that creates an array from a xml configuration file. I put a variable private in this class and that you use a getter in other classes to access the table.
the routine that uses the table does the following:
-call the getter and assign the value returned to a local variable tmpArray (private). the Get accessor is a simple return() by using a value that is created in the constructor.
-use a loop for itterate on content
-use array.shift () to the element pop tmpArray
the next time I run the routine, the content of the table is empty. I use the getter similarly. I've implemented the getter when I tried to manage the two tables in the same class, thinking that as long as the original array has been private (I also tried static), that wouldn't change the value. I have since got around the problem by movine routine that fills the original value of the manufacturer, to the Get accessor.
then, consider the following code:
import flash.events.Event;
btn.addEventListener ("click", btnHandler);
var monTableau = new Array();
var myTmpArray = new Array()
MonTableau is ['one', 'two', 'three'];.
myTmpArray = myArray;
function btnHandler(evt:Event)
{
for (var i in myTmpArray)
{
trace ("myTmpArray.length:" + myTmpArray.length);
trace ("myArray.length:" + myArray.length);
myTmpArray.shift ();
trace ("myTmpArray.length:" + myTmpArray.length);
trace ("myArray.length:" + myArray.length);
}
}
This returns:
myTmpArray.length: 3
myArray.length: 3
myTmpArray.length: 2
myArray.length: 2
myTmpArray.length: 2
myArray.length: 2
myTmpArray.length: 1
myArray.length: 1
If I create a variable myVar and set it to 1 then set myOtherVar = myVar equal both the same value
If I change the value of myOtherVar, myVar is not affected.
but using the shift() method changes the original and the copied table.
myTempArray IS NOT a copy of myArray but REFERENCE to is - shift() so affect them both.
-
Column in the target Table is now in a unique index, changes in maps?
Hello
just a quick question.
I have a mapping and a column of the target database is now in a unique index. What I have to change something in my map?
I don't think so but if I change something please let me know.
Thank you
GreetingsIf the dataset that you load convinces him the uniqueness of the index (which it probably does if the index has been applied to the previously loaded data) then you should not change the mapping.
If
-
Automatic generation of IDS in the target table
I have the data source (textfile.txt that contains a single field) store with datastructure (lets say: name varchar (25))
Data structure of the target data store (id varchar (25), name varchar (25))
Now, I want to insert this text file to db. Name is mapped to the target data store name field. But the ID field must be incremented automatically in the target data store. (1,2,3...).
How can I achieve this?
regardingHi 8680179, the user
You can write this code in the procedure of ODI.
See you soon,.
Andy
Maybe you are looking for
-
Printer sharing via LAN - EPSON XP-335
Hello We use 3 Macs connected via LAN (Ethernet, we do not use Wi - Fi). I have connected an EPSON XP-335 via USB to Mac #1, and it prints fine. On all Macs, I installed the software EPSON printing and active "Sharing printers", via preferences > sha
-
How means Android photo when I see it in Awesome Bar?
When I go to some website I sometimes see the Android image in the awesome bar and I was wondering what this means.
-
CalcLockBlock / Cache size setting
Hi allWe use OBI against one of our Essbase application. It works very well overall, but we get an intermittent error with a few reports of OBI, which reads:«The dynamic calc processor can not allocate more than the blocks of the heap [213].» The par
-
For Essbase 11.1.2.3 and java until version 7 update JRE 40, Regional service console to start normally through web Launcher on our server "ourserver:XXXX / easconsole" java web start (with the generated jnlp automatically provided by essbase install
-
The Lab Manager Ldap integration
I, ve configured a vSphere/ESX environment of OTA in a subnet of 172.10.1.0/24.Open ports on our firewall to manage OTA from our direct environment. Online subnet: 10.128.0.0/16Installed Labmanager 4.0 and add it to the field in the environment of th