The logged data is not loaded in the target table in cdc-compatible?

Similar Questions

• GET A DATE THE TARGET TABLE MAX

  Hello friends,
  
  Can someone tell me how to extract the date max of the target table.
  
  Thank you.

  Azhar

  Sorry why again once you are not able to use the aggregator operator to get a max value. You don't need a group of when taking a max value what from a table, unless otherwise specified

  Try it with a simple table b table card

  table (several itemno)

  table b (number maxitem)

  Use aggregator and don't put anything in the section of owb agg transformation group. Generate the code and take a look

• Failed to truncate the target table while programming the interface in ODI

  Hi Expertise,

  I developed a scenario in an interface, where I planned keeping the option Truncate as false, right there the data is been going to target without any problems, but when I changed the status of truncate to TRUE, the interface is been run, but the array is not get truncated, rather the data's been loading again to target. (when running manually, the target table is been truncated perfectly) but not in programming.

  Can someone help me in this problem.

  Thank you

  Shakur.

  Have you regenerate the scenario in question since you changed the option Truncate. If you have not the regular job must still run the old code

• ODI 12 c: IKM for differential insert and update with a sequence in the target table

  Hello

  I have a map where I fill in a column of my target table using a database sequence. Now my mapping is supposed to load the target gradually table. So I need a revenge for update and incremental insert. Now with this differential IKM it compares all the columns to match all colmuns line to understand, it should be an insert or update. Now, the following code shows that when the ROW_WID is loaded with a sequence of database.

  If NOT EXISTS

  (select 1 from W_LOV_D T

  where T.ROW_WID = S.ROW_WID

  and ((T.CREATED_BY = S.CREATED_BY) or (T.CREATED_BY IS NULL and S.CREATED_BY IS NULL)) and

  ....

  ....

  < the rest of the comparison of columns >

  )

  So when running ODI returns following error

  Caused by: java.sql.SQLSyntaxErrorException: ORA-00904: "S". "" ROW_WID ": invalid identifier

  Please suggest if there is no other IKM I should use or if there is another way around it without changing the code IKM...

  Hi Marc,

  Thanks for your reply.

  I had solved it. The incremental update process inserts all rows from the source table to I$ table that exists in the target table. It does so by the where sql such as mentioned in my questions as

  WHERE THERE is NOT ( . COLUMNS = . COLUMNS)

  Now in the incremental update IKM Oracle to retrieve all the columns it uses the substitution with parameter as TABLE TARGET. Due to this column sequence will in the comparison and the request fails. When I used the IKM SQL incremental update it used INTEGRATION TABLE as parameter table to pick up the columns, as I'd mentioned in the target sequence is run, so it does not get the sequence column.

  Simple answer: to solve this, use incremental update of the SQL IKM.

  Thank you

  SM

• How to MERGE when the target table contains invisible columns?

  Oracle running on Oracle Linux 6.4 12.1.0.2.0 database:

  During his studies of FUSION with invisible columns, I discovered that invisible columns in the target table cannot be read. Workaround seems to be

  MERGE INTO (SELECT <column list> FROM <target table>) AS <alias>
  

  However, the documentation does not seem to allow this. Here are the details.

  Test data

  > CREATE TABLE t_target(
    k1 NUMBER PRIMARY KEY,
    c1 NUMBER,
    i1 NUMBER invisible
  )
  
  table T_TARGET created.
  
  > INSERT INTO t_target (k1,c1,i1)
  SELECT 2, 2, 2 FROM dual
  UNION ALL
  SELECT 3, 3, 3 FROM dual
  UNION ALL
  SELECT 4, 4, 4 FROM dual
  
  3 rows inserted.
  
  > CREATE TABLE t_source(
    k1 NUMBER PRIMARY KEY,
    c1 NUMBER,
    i1 NUMBER invisible
  )
  table T_SOURCE created.
  
  > INSERT INTO t_source (k1,c1,i1)
  SELECT 1, 1, 1 FROM dual
  UNION ALL
  SELECT 2, 2, 9999 FROM dual
  UNION ALL
  SELECT 3, 3, 3 FROM dual
  
  3 rows inserted.
  

  First try

  Please note that I have a WHERE clause in the WHEN MATCHED clause. Its purpose is to avoid the update of a row when data are already correct. The WHERE clause is trying to read the invisible column of the target table.

  > MERGE INTO t_target o
  USING (
    SELECT k1, c1, i1 FROM t_source
  ) n
  ON (o.k1 = n.k1)
  WHEN MATCHED THEN UPDATE SET
    c1=n.c1, i1=n.i1
    WHERE 1 IN (
      decode(o.c1,n.c1,0,1),
      decode(o.i1,n.i1,0,1)
    )
  WHEN NOT MATCHED THEN INSERT
    (k1, c1, i1)
    VALUES(n.k1, n.c1, n.i1)
  ...
  Error at Command Line : 10 Column : 12
  Error report -
  SQL Error: ORA-00904: "O"."I1": invalid identifier
  

  As you can see, I put a subquery after the USING clause so that 'n.i1' would be 'visible', but this is not enough since the 'I1' column in the target table is always invisible.

  Second test

  > MERGE INTO (
    SELECT k1, c1, i1 FROM t_target
  ) o
  USING (
    SELECT k1, c1, i1 FROM t_source
  ) n
  ON (o.k1 = n.k1)
  WHEN MATCHED THEN UPDATE SET
    c1=n.c1, i1=n.i1
    WHERE 1 IN (
      decode(o.c1,n.c1,0,1),
      decode(o.i1,n.i1,0,1)
    )
  WHEN NOT MATCHED THEN INSERT
    (k1, c1, i1)
    VALUES(n.k1, n.c1, n.i1)
  
  2 rows merged.
  

  Here I used a subquery in the INTO clause thus, and it worked.

  Unfortunately, this does not seem to be admitted in the documentation: IN fact refers to a table or a view as schema objects.

  

  My question is:

  How can I refer to invisible columns in the target table without creating a new object? My workaround using a subquery solution seems to work very well, but can I recommend if it is not documented?

  Can I replace a "inline view" for a view and still be supported?

  During his studies of FUSION with invisible columns, I discovered that invisible columns in the target table cannot be read. Workaround seems to be

  However, the documentation does not seem to allow this. Here are the details.

  Here I used a subquery in the INTO clause thus, and it worked.

  Unfortunately, this does not seem to be admitted in the documentation: IN fact refers to a table or a view as schema objects.

  My question is:

  How can I refer to invisible columns in the target table without creating a new object? My workaround using a subquery solution seems to work very well, but can I recommend if it is not documented?

  Can I replace a "inline view" for a view and still be supported?

  But the documentation DO ALLOWS not only! You use a view - a view online and those that can be changed in a MERGE statement.

  All versions of the doc for FUSION since 9i specifically say this:

  INTO clause

  Use the INTO target clause to specify the table or view you are updating or inserting into. To merge the data in a view, the view must be updated. Please refer to the "Notes on the editable views" for more information.

  Here are the links for the doc. 9i, 10g, 11g and c 12, ALL OF THEM (the last three), except 9i have this EXACT clause above.

  SQL statements: INDICATED to ROLLBACK FALLS, 15 of 19

  http://docs.Oracle.com/CD/B19306_01/server.102/b14200/statements_9016.htm

  http://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_9016.htm

  https://docs.Oracle.com/database/121/SQLRF/statements_9016.htm

  9i doc does not have this specific quote in the INTO clause section, but it doesn't have that quote a little later:

  Limitation of the update of a view

  • You cannot specify DEFAULT when refreshing a view.
  • You cannot update a column referenced in the ON condition clause.

  merge_insert_clause

  The merge_insert_clause specifies the values to insert into the column of the target table, if the condition of the ON clause is false. If the insert clause is executed, then all insert triggers defined on the target table are activated.

  Restrictions on the merger in a view

  You cannot specify DEFAULT when refreshing a view.

  If your "workaround" isn't really a workaround solution. You SHOULD use an inline view if you need to reference a column "invisible" in the target table, since otherwise, these columns are INVISIBLE!

  My workaround using a subquery solution seems to work very well, but can I recommend if it is not documented?

  You can recomment it because IT IS documented.

• delete all, then insert into the target table, two steps in one transaction?

  Hello
  
  We have the following two steps in one ODI package, it will be managed in a single transaction?
  
  procedure step 1): remove all of the target table.
  interface in step 2): insert data in the source table in the target table.
  
  our problem is that step 2 can take some minutes, and then the target table can temporary unusable for end users who try to access it, I'm good?
  
  Kind regards
  Marijo

  Hello

  It can be managed in a single transaction by selecting IKM as the Append and TRUNCATE/DELETEALL Option command in the FLOW of an interface tab.

  Thanxs
  Malezieux

• Add records in the target table

  Hi all
  I HAV done an interface for a simple source data transfer to the target. When I run it, the records are stored in the target table. Now, I want to launch the interface (for the same or different source table) and add the records to existing records in the target table.
  
  Kindly guide me, explaining how shud I do the addition in the target table.
  
  Thanks in advance.

  Hello

  You can use the IKM control add... it will add records...

  Thank you.

• OWB, I need to update the target table with the same field for game/update

  OWb, I try to update the target table with the game and the update on the same ground is this possible. I'm a match merge error indicating that you cannot update and match on the same ground. But in SQl is my selection
  
  Update table
  define RFID = 0
  where RFID = 1
  and ID_processus = 'TEST '.
  
  Can HWO I do this in OWB.

  I have check but in the case later (last one) that he warns no error if you can go with it.
  and I tested it it works

  You can check the first case (from where we start) if it has been warned and then try to run.

• How to migrate data from a source to multiple targets (tables)?

  How to migrate data from a source to multiple targets (tables)? Describe the General steps, please or point me to a tutorial

  Yes, a table in a mapping element can be source and target at the same time (i.e. a target can be reused as a source for the rest of the map on the right side of the table).

  Don't forget to check the order of loading (in the property map), to ensure that the reused as source is loaded before the final table target table.

  I tested it and it works. However, the documentation is not said in the link I gave you above:

  "Each element of data store that has entries but no exits in the logical diagram is considered a target."

  Usually, I tend not to do. I am in favour of a Divide and Conquer approach and try to have my mapping as simple as possible. It is easier to debug and maintain.

• The event - the print spooler log error could not load a plug-in module

  Using a HP Officejet 6500 a Plus e-All-in-One - E710n p6 - 2036c HP with Windows 7 sp1 64 bit operating system desktop.  I get the following error:

  Log name: Microsoft-Windows-PrintService/Admin

  Source: Microsoft-Windows-PrintService

  Date: 27/09/2012-17:24:41

  Event ID: 808

  Task category: initialization

  Level: error

  Key words: print spooler

  User: PC-1\mpw

  Computer: PC - 1

  Description:

  The print spooler could not load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI. DLL, error 0xc1 code. See the user context information for event data.

  The event XML:

  http://schemas.Microsoft.com/win/2004/08/events/event">

  808

  0

  2

  36

  12

  0 x 8000000000020000

  43

  Microsoft-Windows-PrintService/Admin

  PC-1

  http://schemas.Microsoft.com/win/2004/08/events"xmlns ="http://manifests.microsoft.com/win/2005/08/windows/printing/spooler/core/events">."

  C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI. DLL

  0xC1

  112

  I have no problem with printing from the desktop wired or wireless laptop. But every time I print something this error appears in the Print Service event log.

  I found that the event ID 315 with error 2114 is a synchronization problem.  When I turn on the printer to the computer before, I get this error in the event log.  If I start first to the computer, and then turn on the printer, the error disappears.

• Column in the target Table is now in a unique index, changes in maps?

  Hello
  
  just a quick question.
  
  I have a mapping and a column of the target database is now in a unique index. What I have to change something in my map?
  
  I don't think so but if I change something please let me know.
  
  Thank you
  
  Greetings

  If the dataset that you load convinces him the uniqueness of the index (which it probably does if the index has been applied to the previously loaded data) then you should not change the mapping.

  If

• Insert generic value in the target table

  Hi all
  
  I'm loading of data from source to target table orcle...
  
  I would like to load one of the columns target with a big generic unique number that does not come from source...
  
  the number in the target column should be likw...
  
  35343834393533363533343934323539,
  35343834393533363533343934323540,
  35343834393533363533343934323541,
  35343834393533363533343934323542,
  35343834393533363533343934323543,
  35343834393533363533343934323544
  
  Concerning

  "" "You're almost there. '"

  Please use capital letters when you access oracle objects.

  < %="odiRef.getObjectName" (« l »,="" « xref_data_sequence »,="" « d »)="" %="">.nextval

  This works...

• ODI 12 c: do I have to reimport the target tables after that I did some clues on them

  Hello

  I created a map after import target tables in my ODI 12 C studio. The mapping is complete and it works without any errors. Now I intend to create some clues that I have an obligation to report. SO, I have to reimport these after creating indexes.

  Thank you

  SM

  Hello

  Here's the thing. The indexes that you created, if you plan to use as a unique index, or as your key to updating ODI you can go ahead and add the template manually in or hit the table again. However, if these indices are purely to make your report more quickly and will have no impact on you data loading then it is pointless to ODI. In the future when you make changes to the table and refresh it in ODI indexes will be added automatically.

  Thank you

  Ajay

• Host to the target tables

  I'm trying to transfer a picture of the LabVIEW host program to the target in real time on a cRIO.

  I'll set up a controlled loop that transfer values one via shared Variables.

  It works fine when I run running to highlight.

  However, if I have both allow to run at full speed, something goes wrong

  and the size of the array ends correctly on the target.

  Is there some tricks on how to transfer tables down

  host to the target, or all the other pitfalls I should be aware when

  work on a real-time target?

  And Yes, I never took the course of the RT, so there might be some vital info miss me.

  Martin

  Hi Martin,

  Why don't you use a SharedVariable taking a picture? Why can you transfer data one by one?

• Query metadata ODI to find the source and the target table for Interface

  Hi Experts,
  
  Customer heading there source of EBS 11.5.10 in R12. They are BIApps ODI. 7952 version. Since then, all mappings there are customized they may not disturb on support of Oracle BIApps is concerned.
  Now, we need to know how many ODI mappings there source EBS is the 11.5.10 in R12 migration and we can only target mappings accordingly.
  
  So, please give me with entries below:
  
  (1) any request for metadata that will give me the information of the source tables table and target them in against an if-same interface that the source of the main interface is another interface.
  (2) what are the other stuffs that I need to look at from the point of view of the mapping changes when the source is upgrading.e.g. only change the source table is enough or I need to focus on other animals. I feel she's boiling down to create a separate source for R12 adapter.
  
  Kind regards
  Snehotosh

  First open the designer-> models and check which model has got the mapping of the eBS. Get this code with this TERRIBLE application

  SELECT count (distinct i_pop) of SNP_POP_COL
  where I_POP_COL in
  (
  Select i_pop_col in the SNP_POP_MAPPING where i_source_tab
  in
  (
  Select i_source_tab in the SNP_SOURCE_TAB where i_table in)
  Select i_table in the SNP_TABLE where I_MOD in
  (select i_mod in the SNP_MODEL where mod_name = "PUT_HERE_YOUR_NAME")
  )
  )
  );

  Will not consider some other influence (i.e. the procedure), it will be an indicator of average first level.