Hot sync and check for problems.

Similar Questions

• My copy registered and checked for XP Pro SP3 does not start after changing the motherboard. Second problem is that I can't find my original install of XP Pro disc.

  After failing to find the source of reliable performance from my PC, I decided to bite the bullet and replace the motherboard, memory and the CPU. I installed a triple base 435 Athlon and a motherboard Gigabyte MA74GMT. Awarded PC again started the first time - but Windows will not, I get a number of options but none work - safe mode brings up several lines of messages on the partition of multi (0) disk (0) rdisk (0).

  A previous post suggested that a similar message meant some kind of malware but if I replace the old motherboard, processor and memory Windows works very well - in fact I use it now.

  Do I have an option but to reinstall Windows from a CD? Otherwise I have a problem - I can't find the installation discs for each piece of software except my Windows XP Pro! I do repair discs?

  Thanks for your help.

  Hi DaGeLi,

  · Provide us with the complete message you receive.

  Follow the methods below:

  Method 1:

  You were able to start the first time, you can try to boot to the last known good configuration and check the results. Link to get the procedure please refer to: how to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  Method 2:

  If it doesn't then you can follow the procedure from the below mentioned link. As you do not have the Windows XP CD you can follow the procedure if you have already installed on the computer to recovery console

  How do I recover from a corrupted registry that prevents Windows XP startup:http://support.microsoft.com/kb/307545

  Otherwise, you may need to make the boot floppies. See the link for the procedure below:

  http://support.Microsoft.com/kb/310994

  You can also contact the manufacturer of the system to get the Windows XP CD.

  For reference: how to fix a computer that does not start:http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think

• HOt sync - Tungsten E2 for Vista

  I had hot, synchronization successfully for some time, although often when I turn on my laptop Vista out, the dates on the calendar disappear.  But as long as I could hot sync with my handheld, it was a minor inconvenience.  But now, apparently, something's wrong with my Pocket PC, because it won't hot sync on my Vista laptop or on our XP desktop (which we used to do).   He gets to the extent of the '2' on the date of transfer of book and then freezes.  When I cancel, also well on the computer and your handheld, it freezes and I have to turn both of them off the coast.  I tried a warm reboot, then a partial hard reset without success.  I hesitate to do a hard reset because I have years of dates on my handheld it is essential to keep.  I'm not aware that I changed the settings on the handheld when it used to work. What can I do?

  I don't know what happened, but when I went in Palm Desktop, this time, my schedule is back!

  Thank God!   Maybe the dbfix doing something after all.   Thanks for your help.

  Message relates to: Tungsten E2

• Version 3.6.23 and page tells me to update, but clicking the link provides no update options and ' check for updates ' tells me there is none

  This is the link that is provided on the help page:

  ATTENTION: Is maintained only Firefox 3.6 with security and updates of stability for a short period of time. Please upgrade to the latest version of Firefox.

  It's page, need me to, and I can't find information about how upgrade to one later version other than "check for updates" in the menu options, which does not (I'm told that there is none and that Firefox will periodically check the updates)

  http://support.Mozilla.com/en-us/KB/updating%20firefox

  The current plan is to start offering updates of Firefox 7 for current users of Firefox 3.6 within this week. For now, just 3.6 users get updates minor 3.6.x. If you want to install the latest version now, you can simply download and install from Mozilla.com.

• Check-in and check out problem

  I use Dreamweaver MX 2004 on a Mac to produce a Web site and a client is using Contribute 3 on a PC to keep the content of the pages. My dreamweavver is set to 'Enable the file check in and check out' and 'extract the files to the opening. It seems to work ok and it wouldn't let me update the pages based on a template until I had checked all these pages. However, a member of the staff to Contribute help has made some changes to 5 pages on the site that have been lost since I updated the pages based on the template. did someone met before? How could he have not downloaded the pages in their update from the model, although I saw him through the process of checking on the files? One of the files could not yet be verified because it is checked out by another user and so I left this file later. Any ideas would be very appreciated.

  It is a tedious process, but you must be
  Systematics-

  * having the customer top-synch all files
  * down-synch your local site
  make changes to the model and let them spread
  * top-synch
  * to inform customers that it's safe to work again on the site

  Wish it were easier me...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "chieflorenzo" wrote in message
  News:ea5clm$AE5$1@forums. Macromedia.com...
  > I use Dreamweaver MX 2004 on a Mac to produce a Web site and a customer
  > is
  > using Contribute 3 on a PC to keep the content of the pages. my
  > dreamweavver is
  > set to 'enable the file check in and check out' and ' extract the files on.
  "> opening." It seems to work ok, and he wouldn't let me update pages
  > based on
  > a model up to what I had checked all these pages. However a member of
  > staff
  > using Contribute has made some changes to 5 pages on the site that have
  > summer
  > lost since I've updated the pages based on the template. is this something anyone
  > has
  > met before? How could he have not downloaded pages while
  > update
  > from the model, even if I saw it go through the process of
  > check the files? One of the files could not yet be verified
  > because
  > it is checked out by another user and so I left this file later.
  > Any
  > ideas would be very appreciated.
  >

• VPN between Cisco and Check Point problem

  Guys,

  I have problems to establish a vpn site-to-site between a Cisco 3660 e router tunnel a firewall checkpoint NG AI R55.

  In the SiteA is an environment with a Cisco 3660 router using the following configurations:

  crypto ISAKMP policy 1

  md5 hash

  preshared authentication

  Group 2

  life 86400

  !

  ISAKMP crypto key [removed] address 172.17.10.111

  !

  Crypto ipsec transform-set esp - esp-md5-hmac serasa

  !

  Serasa 1 ipsec-isakmp crypto map

  defined by peer 172.17.10.111

  Set transform-set serasa

  match address 101

  !

  interface Serial5/4

  bandwidth 64

  IP 192.168.163.6 255.255.255.252

  no ip unreachable

  No cdp enable

  card crypto serasa

  !

  IP route 10.12.0.155 255.255.255.255 192.168.163.5

  IP route 172.17.10.111 255.255.255.255 192.168.163.5

  IP route 172.17.10.155 255.255.255.255 192.168.163.5

  !

  access-list 101 permit tcp 172.248.7.200 host 10.12.0.0 0.0.255.255 eq 3315

  In the SiteB, we have an environment highly available Nokia using VRRP.

  The IP address configured as a cluster in the Control Point is 172.17.10.111.

  We have already confirmed all the configurations of the phase 1 and 2 and is OK, but the VPN is not established.

  The following messages appear in the router and the firewall:

  ROUTER

  June 15 at 10:39:24 orbital: ISAKMP (0:252): check IPSec 1 proposal

  June 15 at 10:39:24 orbital: ISAKMP: turn 1 ESP_DES

  June 15 at 10:39:24 orbital: ISAKMP: attributes of transformation:

  June 15 at 10:39:24 orbital: ISAKMP: program is 1

  June 15 at 10:39:24 orbital: ISAKMP: type of life in seconds

  June 15 at 10:39:24 orbital: ISAKMP: life of HIS (basic) 3600

  June 15 at 10:39:24 orbital: ISAKMP: type of life in kilobytes

  June 15 at 10:39:24 orbital: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0

  June 15 at 10:39:24 orbital: ISAKMP: authenticator is HMAC-MD5

  June 15 at 10:39:24 orbital: ISAKMP (0:252): atts are acceptable.

  June 15 at 10:39:24 orbital: IPSEC (validate_proposal_request): part #1 of the proposal

  (Eng. msg key.) Local INCOMING = 192.168.163.6, distance = 172.17.10.111,.

  local_proxy = 172.248.7.200/255.255.255.255/0/0 (type = 1),

  remote_proxy = 10.12.0.0/255.255.0.0/0/0 (type = 4),

  Protocol = ESP, transform = esp - esp-md5-hmac.

  lifedur = 0 and 0kb in

  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2

  June 15 at 10:39:24 orbital: IPSEC (kei_proxy): head = serasa, card-> ivrf =, kei-> ivrf =

  June 15 at 10:39:24 orbital: IPSEC (validate_transform_proposal): proxy unsupported identities

  June 15 at 10:39:24 orbital: ISAKMP (0:252): IPSec policy invalidated proposal

  June 15 at 10:39:24 orbital: ISAKMP (0:252): politics of ITS phase 2 is not acceptable! (local 192.168.163.6 remote 172.17.10.111)

  June 15 at 10:39:24 orbital: ISAKMP: node set 2114856837 to QM_IDLE

  June 15 at 10:39:24 orbital: ISAKMP (0:252): lot of 200.245.207.111 sending my_port 500 peer_port 500 (I) QM_IDLE

  June 15 at 10:39:24 orbital: ISAKMP (0:252): purge the node 2114856837

  June 15 at 10:39:24 orbital: ISAKMP (0:252): unknown entry for node-528822595: State = IKE_QM_I_QM1, large = 0x00000001, minor = 0x0000000C

  June 15 at 10:39:24 orbital: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode failed with the peer to 172.17.10.111

  FIREWALL

  IKE: Main Mode has received Notification of peers: first Contact

  IKE: Completion of Main Mode.

  IKE: Quick Mode has received Notification of the counterpart: no proposal chosen

  IKE: Quick Mode has received Notification of the counterpart: no proposal chosen

  IKE: Exchanging information received remove peer IKE - SA:

  Anyone have idea who might be the problem?

  Thank you very much for the help.

  Fabiano Mendonca.

  Cool. pls mark as resolved if that might help others... the rate of responses if deemed useful...

  REDA

• Check for problems with windows 7

  When you use "search programs and files" in windows 7, the first letter I press turns into a number? For example, if the first letter of my research is C, it actually prints the letter 9?

  Thanks in advance,
  jastokes @ comcast.net

  Hi jastokes,

  Thanks for posting in the Microsoft community.

  Before you start the troubleshooting steps, I need the information required.

  1. you receive an error message?

  2. have you made any changes to the computer?

  3. you are using laptop or desktop?

  4. What is the brand and model of the keyboard?

  5 are you facing any problem with the program of research and files?

  6. check with different keyboard.

  Method 1:

  I suggest you to check the issue with the help of keyboard on the screen.

  Type without using the keyboard (on-screen keyboard)

  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  See also:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• Do not see "Show edit pins and check for selected mask overlay box" in LR

  Hi, for some reason any sign 'See change it pines and the box to see the selection mask Overlay' disappeared from the bottom of the screen of LR. I have Mac OS X and LR cc.

  Press T to show (and hide) the toolbar.

• Sweet Kayote mp3 wma converter - I want to uninstall, and check for the presence of virus

  I downloaded the free wma mp3 Kayote Soft converter and I read its got a virus with it and I don't know how to uninstall it. I have windows vista

  How did you know it was the virus? Do you have any warning from your anti-virus software?

  In general to uninstall a program you could do it from Add/Remove programs or programs and features in Control Panel. If you worry virus, you can run the full scan of the system with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Cash bank management and check for manual payment fee

  Hello

  My questions are

  1. in the cash management is why bank charges created as a receipt of Misc in Cash Management r12?

  2. If the case of manual payment if a cheque is damaged how to ignore us as number of cheque while making payments.

  Thanks for the replies.

  Because it is an expense of misc (anything other than bank fees).

  Various income (bank interest) will be created as recipe Misc.

• For the last week or three Firefox updated two or three times for each update and sometimes for no apparent reason...

  For the last week or three Firefox updates two or three times for each update. Sometimes it refreshes without obvious reason. For example, I'll be in the middle of typing in the message forum block & it refreshes. Or by filling out an online form. Or simply viewing a page.

  You can check for problems caused by an extension that is not working properly.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• No sound, unable to update windows, a variety of error codes and dssenh.dll problems... Help?

  I'm running a Toshiba with Windows Vista. The 24th of this month, I have installed the updates for my computer, but when I rebooted I had absolutely no noise. I double checked to make sure it was not cut, I uninstalled and reinstalled the drivers, and then I tried to do a system restore. None of them worked.

  Then I tried to check updates more see if this would help to solve my current problem and began to find more mistakes, such as "could not find updates, error code: 800 b 0001 ' or 'Code error 8024402F' these are mistakes that I see most.

  Then when I go to open certain programs I get errors that say something about ' bad image: problem with Dssenh.dll "when I try to save it again, I get other errors with about 5 other .dll files.

  Of course, I went to the Microsoft website long enough... and I went through multiple options and steps, but nothing helped. So I thought that my last option is to ask.

  The last thing I can find is to download the "System update readiness Tool" to check for problems.

  Well, I can't download or run because of my error '800 b 0001'.

  I don't know what I would do at this point... Help?

  Before the update from the update began when my computer was being restarted... I had a black screen and had a weird three-step process that was supposed to be recommended. Meanwhile, there was a flood of information that crosses the screen.
  I ran a scan complete antivirus just in case, but it could be a virus that has not been detected?

  If anyone has any information, it is greatly appreciated... I don't know what to do.

  McAfee (and Norton) applications are notorious for not to uninstall (or upgraded) themselves!

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 test cycle.

• iTunes stopped responding and looking for possible solutions

  Original title: ITune HELP REQUIRED

  I downloaded the latest version of ITunes for Vista (at least 3 x / 2 desktops on the same computer). Whenever I try to access get the terms, and once I did, I get a message "ITunes has stopped responding and looking for possible solutions. The solution is to download the latest version of ITunes.

  Hi Nancy Garrett.

  I suggest you to open Event Viewer and check for more details on the error code.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

   

  What are the information in event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  In the meantime, you can also check out the link that has the similar problem of Apple's Support.

  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

  http://support.Apple.com/kb/TS1717

  Let us know the results.

• What is happening with Windows Update you will need to install a new update to check for updates?

  What is happening with Windows Update from 18/01/2016 When I find out Windows Update in Control Panel, he said, with a big yellow sign warning, "install new Windows Update software to check updates. You must first install an update from Windows Update. Your automatic update settings will not change. To install the updated Windows Update will automatically close and reopen. »

  Only Microsoft would think of this UPDATE TO SEE THE UPDATE.

  When you click on install, it starts running AND running and checking for updates and there is no display. It must be download them?

  When I go to shut down the computer, there is a big yellow exclamation on the Start button that says that Windows Update will install updates before its stop point. So it takes a while to stop.

  I also noticed that in Windows Task Manager > process I have an iexplore.exe process * 32 running 120, 600 KB.

  It stopped when I changed the Windows Update option stop the download and installation.

  The computer is running very slow and erratic.

  I just reinstalled Windows 7, so I have to do all the updates.

  Does anyone have the same problem?

  Thank you

  TomS

  Yep, that's how M$ slides 10ware in

  See the note at the bottom of the updates settings page ;)

  M$ has abused more than system update in 2015 and that continues in 2016.

  I usually don't worry about this if updates are they come if not well welcome to 2020 support ended in the beginning

  Do not use Internet Explore / MSE / Windows Firewall / Windows defender

  Find alternatives for all of the foregoing

  Free Panda who has a firewall

  Premium not free malwarebytes, but it has a free version

  Superaitispyware pro, which also has a free version

  Moon pale x 64 bit is quite good with Firefox.

  In the end, you can use a standard account instead of an administrator account and be safer.

  You can still enter a password if you are prompted to run the items that you know are safe.

  Well how did Linux a user to enter a password to do most of the tasks = kind of annoying if: p

  Let junkware M$ at the door, you will be much safer any square meter said ;)

• Displays HP 4625 and Windows8 / setup problem

  I have installed my hp 4625 wireless all-in-one on my Win8 llaptop. The shortcut of installer created on my desktop, but every time I press the shortcut, it is trying to re - install the hp4625 instead of open service program. same behavior when I run the program from the WIn8 tile interface.

  I have install the hp4625 on my other laptop with Win7 and everything works fine as expected.

  How do I solve my Win8 installation?

  Hello

  Try fllowing below steps and then add the printer and check for the difference:

  http://support.HP.com/us-en/document/c03659948

  Shlomi