iTunes stopped responding and looking for possible solutions

Original title: ITune HELP REQUIRED

I downloaded the latest version of ITunes for Vista (at least 3 x / 2 desktops on the same computer). Whenever I try to access get the terms, and once I did, I get a message "ITunes has stopped responding and looking for possible solutions. The solution is to download the latest version of ITunes.

Hi Nancy Garrett.

I suggest you to open Event Viewer and check for more details on the error code.

Open event viewer

http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

 

What are the information in event logs? (Event Viewer)

http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

In the meantime, you can also check out the link that has the similar problem of Apple's Support.

iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

http://support.Apple.com/kb/TS1717

Let us know the results.

Tags: Windows

Similar Questions

  • Skype has stopped working and windows is looking for a solution.

    original title: problem with Skype

    I have been using Skype on my laptop for 12 months with no problems, all of a sudden, I get a message that Skype has stopped working and windows is looking for a solution.  I checked my firewall, windows updates and downloaded Direct X, as suggested by Skype. I've uninstalled Skype and downloaded again to make sure that the version lasted. IHAVE had also my whole system recharged but it did not work. I am at a loss to know what to do next. Someone at - it ideas

    Hello

    It is a possibility that a third-party application is causing the conflict with Skype. We can perform the clean boot troubleshooting and check which program is causing the conflict.
    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • While opening a program get an error message: program has stopped working, Windows is looking for a solution

    Original title: error message:

    When I try to open one of my programs, I get an error message states that my program has stopped working, Windows is looking for a solution

    Hi SheilaFrenchman,

    ·         Are what program you referring?

    ·         Did you do changes on the computer before the show?

    ·         What is the full error message?

    Follow these steps:

    Step 1: Start the computer in safe mode and check if the problem persists.

    Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  • Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem

    Original title: games

    When I start my X Microsoft Flight Simulator (Deluxe Edition), it is running propely for some time (15 to 20 minutes) that it no longer works and gives me a message "Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem"and he have me to close the program. (I have Windows 7)

    Help, please. :)

    I just "uninstalled" pack of the accelerator, and it worked fine.

  • Dc7800: "display driver igfx stopped responding and was recovered with a success." for Windows7

    Hello

    Dc7800 series systems are in error - "display driver igfx stopped responding and has successfully recovered. Windows 7 "with Windows7 operating system

    The systems provided with Windows Vista and we have later upgraded to Windows 7. Now 2/3 systems many DC7800 systems that we have in our office are showing the above error and the screen turns off for 2/3 seconds. We have reloaded OS but still the problem persits.

    There is no display driver for Windows 7 for DC7800 HP driver/software downloding site. Application of detection of driver of Intel found that this latest version of the driver is installed.

    Ran windows memory diagnostic tool and has not found any error.

    Can anyone help?

    Thank you

    Hello:

    Try this driver for 32 bit OS:

    http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18223&lang=eng&OSVersion=Windows%207%20(32-bit) * & DownloadType = drivers

    Try this driver for the 64 bit OS:

    http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18228&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType = drivers

    Paul

  • display driver intel graphics accelerator driver for windows Vista (r) stopped responding and has recovered?

    I recently formatted my laptop (fujitsu siemens) and she ALWAYS had windows 7 installed inside. However, since I formatted, sometimes white people just screen out and I get the message:

    display driver intel graphics accelerator driver for windows Vista (r) stopped responding and has recovered?
    Any ideas what could be going wrong?

    Update all the drivers on Fujitsu support site, for your model

  • Photoshop Elements 14 - when I am editing it said it should close and that windows is looking for a solution

    I downloaded the demo of Photoshop elements 14, but when I edit a photo, that sometimes she has to close and that windows is looking for a solution.

    I have the requirements.

    I uninstalled and reinstalled.

    In the end, I downloaded the trial version of Photoshop elements 13 and this works perfectly, however, I like the shake options and mist ss14 has therefore, I would really like to use that, however I don't want to pay and then find out that I can't make it work.

    Help, please

    teresat107366 wrote:

    I have a picture open and he cropped to dpi 6 x 4 300pix/inch.

    Then I opened a new empty file, changed the option international A4 paper.

    I then clicked on my picture, selected the move tool and try to drag the empty in my photo tray file, so that I can print on photo paper.

    Sent from my iPad

    The empty file A4 must be chosen and indicated in the editing workspace. You should drag the other image of the photo to the workspace tray, not the workspace to the photo tray. Then, with the tool moving is selected, you use the handles to resize, move or rotate the image.

  • Spectrum 360: Display driver stopped responding and recovered - spectrum 360

    Just in case someone is looking for a (kind of) solution to this problem:

    Location:

    -New spectrum x 360, came loaded with Windows 10. All updates (Windows and Intel and HP) made.

    -When you scroll websites with Firefox, the computer hangs for about 5 seconds, you get the message "display driver stopped responding and has recovered. Display driver intel HD Graphics Drivers for Windows 8 (R) answers more and was successfully'

    -Open the browser windows are black, but can be restored by reducing to a minimum then them openeing again

    -Sometimes on a variety of Web sites. EBay seems one need to reproduce, but this can be linked to the amount of scrolling rather than any specific web content. Scroll through the eBay ads I get it about every thirty seconds

    I guess it's a driver problem, possibly wait a version 10 of Windows. The solution for now is to use the browser of Microsoft Edge.

    In Firefox, go to options, then Advanced tab then general uncheck the use hardware acceleration

  • Windows 7 - is there a way to disable the "... looking for a solution...". "dialogue?

    Repeatedly, to a crash program, (different programs), Windows 7 responds with a box dialog error that says "xyz program has stopped working, windows is looking for a solution to the problem."  This continues for a while, finally, the error dialog box indicates that no solution has been found.

    Of course, no solution is ever found!  The computer wasted my time looking for this elusive 'solution' with success and nothing to actually restart the program.

    Is it possible to disable this apparently useless feature?

    Click on change settings for all users report

  • Pavilion 6154ea: Radeon display error - display driver stopped responding and has recovered

    Received a UN expected error in the web search, actully screen off for a few seconds before receiving an error on the display driver stopped responding and recovery.

    Took a glance in the peripheral section where the 2nd adapter displays without any sign of error.

    After recently installing a new SDS moving from the HARD drive, reinstall windows 7 etc via the updates and the order to make recovery disc the laptop because I used receive a blue screen error frequently, so that the display driver does not not error occasionally when using the design programs.  Therefore assumed, needed a new HDD/SSD and factory restore.

    -Laptop computer has been cleaned withdrawal because keyboard, frame etc. with solvents as a cleaner. Therefore cannot be over heating the fan works hard to due and SSD.

    -Power supply has been connected to the time

    N ' was not overclocked as it is when using disk HARD aswell

    It wasn't until today where it happened again, without the blue screen though. So decided I would look at him and realized it is a common problem with the ATI drivers, when I assumed it was a HARD drive failure all along.

    This time the screen turned off for a few seconds, more then previously which is a little disturbing. Was only using a search engine with no program in the background. Infact havn't got round to reinstall files and software so the laptop is very clean and basic and works so don't know why I feel this fast.

    Need to know your opinion on this please, may not know... (Radeon HD 6490M)

    Thank you

    Hi @skibbles,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question in the subject of your HP Pavilion dv7-6154ea Entertainment Notebook and problems with the display driver stopped responding. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. This resets the hardware parameters and contributed to others.

    Here is a link to test the material if you need it. It checks the pieces to see if something is a failure.

    Please let me know how it goes.

    Thank you.

  • I am looking for a solution Server (with Te css) for the fact that Firefox uses the system DPI settings, which makes my site look (too) big.

    My site appears much too big in firefox. And I want all browsers to view my site properly.
    I know that there are settings wihtin firefox that fix this problem. But I'm looking for a solution on server side, so that visitors to my site must not be disturbed by changing their settings.

    You may need to change your site as soon as 30 Chrome and IE 11 will also use the system DPI setting (like Firefox does now).

    Possible solution:

    • Type of topic: config in the Firefox address bar and hit the Enter key.
    • If the warning that this might void your warranty , click I'll be careful, I promised.
    • Search for layout.css.devPixelsPerPx

    • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

    If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

    If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

    To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  • Satellite A500-1GH - display driver stopped responding and has successfully

    My laptop is the A500-1GH and I bought it 2 days ago...
    My problem is that, for the fourth time, the screen went black and then recovered and I get the message "display driver stopped responding and was retrieved successfully." My graphics card is Nvidia GeForce 330.

    I'd appreciate it if anyone knows what to do to fix this

    Thanks in advance

    Hello

    Looks like the graphics card driver crashed for no apparent reason.
    Have you tried to reinstall the graphics driver?

    To do this.
    Visit the page of European Toshiba driver and download the driver for this model of laptop. Update the driver and restart the device.

    It would be interesting to know if it would help.

  • Pomp L855 - 11 p: AMD driver stopped responding and has recovered

    Hello
    I bought a Sattelite L855 - 11 p a day ago. Since it first started, I have a problem with the ATI driver. At the time at the time, the PC is locked with yellow dots on the screen, and about 10 seconds later, I get following error messages for Windows 7 64-bit:
    -Display driver stopped responding and has recovered
    The AMD driver did not

    The PC is just out of the BOX.
    Toshiba updates: Assist and BIOS
    In addition, updates of Windows 7.

    Any ideas?
    Driver package: 8.932.5.3 - a-132503C-Toshiba 120120
    CCC Version: 2012.0120.420.7502
    OpenGL Version: 6.14.10.11411
    Direct 3D Version: 7.14.10.0889

    CPU: AMD Radeon HD M 7670
    BIOS version: 013.012.000.041
    Reference to the BIOS: BR42875.003

    Satellite:
    BIOS v1.60
    Windows 7 Home premium SP1

    Thanks in advance

    Large.
    Thanks a lot for your ad and your solution. :)

  • Re: Qosmio X 500 - 11Z - display driver stopped responding and has recovered

    REF: PQX33E-02J00TCZ

    Hello, I had this problem:

    my friend bought new Qosmio for games... and the problem is with the graphics card Nvidia GT 360 M
    graphics card says this: display driver stopped responding and recovered... the screen flashes twice and its ok.
    its when I start windows (windows 7 HP 64 bit) or when I click in the Device Manager on the graphics card, on Internet when I surf... ordinary work, anything heavy for laptop as this :-)
    I changed my driver - standard uninstaller, then clean the pc with cc cleaner and install new drivers
    error still persists to say that...

    I tried the drivers nvidia and support toshiba official. the same two. problem remained.

    can anyone help?

    Hello

    To be honest, it is one of the most annoying problem in this forum. You can find many threads dedicated to, display driver stopped responding and has recovered, problem. There is no good solution for it. I solved this problem by installing a driver from nvidia.com site viewing, but I Gt 230 m. Don't know if this can help you too...

  • How can I fix this problem display driver igfx stopped responding and has recovered?

    No matter what time do anything in 'normal' mode my screen flashes black, and an error comes up saying display driver igfx stopped responding and has successfully recovered. Sometimes it gets so bad that my computer will freeze and close. This has happened for about two months now. I had to keep my computer in "safe mode with network. This problem does not occur in "safe" mode What should I do to solve this problem. As soon as possible, I take online courses, and a major problem.

    I have a HP Pavolion dv4-1120us

    Vista Home Premium

    The problem can be solved by following these steps .

Maybe you are looking for

  • Sync up you said cookies are disabled

    I try to get the sync to work and may not go beyond the page "Welcome to Sync. He said: my cookies are disabled, even if I deleted all and they are activated. How can I fix it?

  • put the old macbook pro hard drive in the new macbook pro

    so I have a MacBook Pro with a port of moniter fried on the motherboard and the battery started to swell physically so I removed the drive HARD and RAM end of 2009. So here's my question; Now, I received recently a late 2010 MacBook Pro with a smalle

  • 29 watts USB - C adapter to charge iPad mini?

    Hello! Can I use the power adapter USB - C 29 watts with lightning to the USB - C cable to recharge an iPad mini or it only works with the iPad Pro? Best regards, Niklas Johansson

  • MacBook or MacBook Air on my facts

    I have an iMac mid-2011 with bad dropouts issues that may have a bad video card. It is checked at the Apple Store. If so, part is of $550 +. Tech said that it probably would not invest so much in a computer age. But, here, that is the dilemma. We are

  • Re: Satellite P100-106 PSPADE - replacement for Panel problem

    Hello I have a problem with the screen on my model Satellite P100 - 106 PSPADE 018110G 3. I changed the old Panel LG PHILIPS LP171WX2 (A4) (K7) (she has wide stripes without a photo) with the new a LP171WP4 Philips (TL) (B1) and after the first start