/Hotpatch adoption EBS R12.2 = yes

Similar Questions

• How do I abort or kill or cancel suspended adoption patch run? (EBS R12.2.4)

  Hi all

  EBS R12.2.4

  OEL 6.5

  Check patches (adoption-status) without previous state, I applied a fix to help:

  phase of adoption $ = patch = 20059164 patchtop = / home/applcrp2/patch_for_application

  But I got the following error:

  Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

  [EVENT]     [EARLY 2015/05/25 15:28:41] Mental health of high-performance database controls

  [EVENT]     [END 2015/05/25 15:28:41] Completed the database sanity checks

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  Log file: /home/applcrp2/CRP2/fs_ne/EBSapps/log/adop/adop_20150525_152806.log

  [STATEMENT] Run adopscanlog utility, by using the command

  "adopscanlog-latest = yes".

  for a list of the log files as well as the snippet corresponding to each log file error message.

  adopted out with status = 2 (failure)

  
  

  I tried to run adoption-status and I discovered that there was previous patch hanging series

  How do I kill/clear/demolition and clean up the patch suspended?

  $ adop-status

  Enter the password for APPS:

  Current patch ID of Session: 7

  Name of node node Type Phase status started completed elapsed

  --------------- --------------- --------------- --------------- ------------------------------ ------------------------------ ------------

  Master CRP2 PREPARE NOT APPLICABLE

  APPLY ASSETS 23 MARCH 15 13:15:35 + 08:00

  FINALIZE NOT APPLICABLE

  COMMISSIONING DON'T IS NOT APPLICABLE

  CLEANING NOT STARTED

  Folder synchronization system used in this Patching Cycle: None

  For more information, run ADOPTION Status Report using - option detail

  Generating the ADOPTION status report to the location: /home/applcrp2/CRP2/fs_ne/EBSapps/log/status_20150525_153549/adzdshowstatus.out

  Please wait...

  Done...!

  Help, please...

  Thank you very much

  MK

  Lol demolition Phase is not necessary.

  Don't run cleaning or if you want to apply another /hotpatch so you can continue with the current adoption session.

• adoption of Patching EBS R12.2 error

  Hi all

  EBS R12.2.4

  RHEL6.6

  phase of adoption $ [appcrp@ip-10-0-0-216 MobileApps] = apply patches = 20049473 patchtop = / u01/MobileApps

  Enter the password for APPS:

  Enter the password:

  Enter the password for WLSADMIN:

  Please wait. Validating credentials...

  RUN the file system context: /u01/appcrp/CRP/fs1/inst/apps/CRP_ip-10-0-0-216/appl/admin/CRP_ip-10-0-0-216.xml

  Context file system PATCH file: /u01/appcrp/CRP/fs2/inst/apps/CRP_ip-10-0-0-216/appl/admin/CRP_ip-10-0-0-216.xml

  Run the SYSTEM command: / u01/appcrp/CRP/fs2 df

  Determination of worker of County...

  Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

  [EVENT]     [EARLY 2015/03/20 19:29] Mental health of high-performance database controls

  [EVENT]     [END 2015/03/20 19:29] Completed the database sanity checks

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  Log file: /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

  [STATEMENT] Run adopscanlog utility, by using the command

  "adopscanlog-latest = yes".

  for a list of the log files as well as the snippet corresponding to each log file error message.

  adopted out with status = 2 (failure)

  [appcrp@ip-10-0-0-216 MobileApps] $ adopscanlog-latest = yes

  Analyzing the log u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log file...

  /U01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log:

  ----------------------------------------------------------------

  #(27-31) lines:

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Staging of the current session

  [PROCEDURE] [END 2015/03/20 19:29:01] Staging of the current session

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Unlock sessions table

  [STATEMENT] Unlock ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and number of tent 2

  =============

  [ec2-user@ip-10-0-0-216 ~] $ vi /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

  Log file: /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

  [EARLY 2015/03/20 19:28:40] Arguments passed to adoption

  phase = patch = 20049473 patchtop = / u01/MobileApps

  [END 2015/03/20 19:28:40] Arguments passed to adoption

  [EARLY 2015/03/20 19:28:40] Check the settings

  [END 2015/03/20 19:28:58] Check the settings

  [STATEMENT] Sourcing of the editing of run environment: /u01/appcrp/CRP/fs1/EBSapps/appl/APPSCRP_ip-10-0-0-216.env

  [EVENT]     [EARLY 2015/03/20 19:28:59] Verification of the requirements of ENV

  [EVENT]     [END 2015/03/20 19:29] Verification of the requirements of ENV

  [STATEMENT]  With the help of 4 workers (default: 4, recommended maximum limit: 62)

  [PROCEDURE] [EARLY 2015/03/20 19:29] Determine the admin node

  [STATEMENT] Node admin: "ip-10-0-0-216.

  [PROCEDURE] [END 2015/03/20 19:29] Determine the admin node

  Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

  [EVENT]     [EARLY 2015/03/20 19:29] Mental health of high-performance database controls

  [EVENT]     [END 2015/03/20 19:29] Completed the database sanity checks

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Acquisition of a lock on the sessions table

  [STATEMENT] Locking ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and the number of tent 2

  [PROCEDURE] [END 2015/03/20 19:29:01] Acquisition of a lock on the sessions table

  [EVENT]     [EARLY 2015/03/20 19:29:01] Check that the waiting for sessions

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Control assets /hotpatch session

  [STATEMENT] Fetch the number of incomplete cycles for ip-10-0-0-216 with appltop_id = 195.

  [STATEMENT] value of incomplete_session: "0".

  [PROCEDURE] [END 2015/03/20 19:29:01] Control assets /hotpatch session

  [STATEMENT] Master Session ID: UNDEFINED

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Staging of the current session

  [PROCEDURE] [END 2015/03/20 19:29:01] Staging of the current session

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Unlock sessions table

  [STATEMENT] Unlock ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and number of tent 2

  [PROCEDURE] [END 2015/03/20 19:29:01] Unlock sessions table

  
  

  ==============

  
  

  [appcrp@ip-10-0-0-216 ~] $ adop-status

  Enter the password for APPS:

  Current patch ID of Session: 3

  Name of node node Type Phase status started completed elapsed

  --------------- --------------- --------------- --------------- ------------------------------ ------------------------------ ------------

  CRP2 slave FS_CLONE COMPLETED 5 November 14 03:59:33 - 04:00 November 5, 14 04:54:56 - 04:00 0:55:23

  PREPARE NOT APPLICABLE

  APPLY NOT APPLICABLE

  COMMISSIONING DON'T IS NOT APPLICABLE

  CLEANING DON'T IS NOT APPLICABLE

  Folder synchronization system used in this Patching Cycle: full

  For more information, run ADOPTION Status Report using - option detail

  Generating the ADOPTION status report to the location: /u01/appcrp/CRP/fs_ne/EBSapps/log/status_20150320_194359/adzdshowstatus.out

  Please wait...

  Done...!

  Please see

  ORA-20001: unable to set editing ORA-06512: has the jump "APPS.ad_zd" job: egosdaci.sql on the appsad_zd build (Doc ID 1989739.1)

  https://support.Oracle.com/epmos/faces/PatchDetail?RequestId=18488991&_afrLoop=191137541272365&patchId=20183051%3AR12.ego.D&_afrWindowMode=0&_adf.CTRL-State=5jicoeb2j_165

  AppsMAsti
  sharing is caring

• Cloning of EBS R12.2.4

  Hi all

  EBS R12.2.4

  RHEL 6.5

  I always get error when cloning time 2 CRP in the same server instance due to duplicate exist in the OraInventory folder.

  How to avoid it? My solution is to manually delete the entries in the xml file that is pretty hard to do because you might accidentally delete the wrong pairs of lines.

  Can I use the deregistration of control?

  For example:

  If none of the mentions above Oracle Home are already enrolled in the Oracle inventory, you can run the following command to unregister or detach that Oracle Home:

  $ cd /u02/r122/fs1/FMW_Home/oracle_common/oui/bin
$ ./runInstaller -detachhome\
  ORACLE_HOME=/s0/r122/at1/FMW_Home/oracle_common

  Thank you

  Yes. This is the correct procedure.

  CD $ORACLE_HOME/Yes/bin

  . "/ runInstaller-silent - ORACLE_HOME = detachHome""ORACLE_HOME_NAME =""

  Take a look on

  R12.2: How to create, update or rebuild the inventory Central for Oracle Applications E-Business Suite? (Doc ID 1588609.1)

• Apply the hotfix using ADOPTION in R12.2.4

  Hi all

  EBS R12.2.4

  OEL 6.5

  11 GR 2

  The consultant encoutered issue in the setup and asked me to apply the p18955265_R12 patch. HZ. C_R12_GENERIC.

  I want to apply this fix by using "adoption." I understand that in R12.2.4, you can not apply a patch using adpatch? but only adopt?

  Patch adoption cycles mentioned the following:

  Phases:

  adoption phase = prepare-> copy the code of the application

  adoption phase =-> apply patch in PATCH environment

  adoption phase = finalize-> makes it ready for the failover system

  adoption phase = failover-> bounce the transition to the system of system files and. FS2 becomes runtime environment.

  adoption phase = cleaning-> withdrawal of obsolete objects.

  adoption phase = fs_clone-> synchronize file systems

  Do I have to perform the steps above to apply the p18955265_R12 hotfix. HZ. C_R12_GENERIC?

  Thanks a lot for your kind cooperation.

  MK

  MariaKarpa (MK) wrote:

  Thanks hussein,.

  I think that these phases are carried out in complete sequence if you apply major patches as 12.2.2 12.2.3 and 12.2.4?

  Well, these phases are applicable to the 12.2.x

  Thank you

  Hussein

• What JDK to install for EBS R12.0.6 to EBS R12.1.1(on 64 bit linux)

  Hello

  I am upgrading R12.0.6 EBS EBS R12.1.1 and in the process after the 455492.1 document.

  It is said in the document-

  " ..

  Step 3.3: Download the latest JDK 6.0 update

  Click on the appropriate link below to download the JDK on the site that corresponds to the operating system used on the application tier node. Download the 32-bit JDK, not the Java (JRE) runtime environment. Due to the integration of Java and C++ code that is currently available on 32-bit do not choose the 64-bit version, which is not supported on the 10.1.2 House.

  "

  What it means? Under Linux, you just need 32-bit jdk installation?

  After that, I followed the document 1439822.1 and downloaded the next jdk:

  19138237

  Oracle JDK 6 Update 85

  OCTOBER 14, 2014

  What is the correct jdk for my environment (Oracle AS 10.1.3 on Linux 64 bit)?

  BR,

  Anurag

  What it means? Under Linux, you just need 32-bit jdk installation?

  Yes.

  After that, I followed the document 1439822.1 and downloaded the next jdk:

  19138237

  Oracle JDK 6 Update 85

  OCTOBER 14, 2014

  What is the correct jdk for my environment (Oracle AS 10.1.3 on Linux 64 bit)?

  Fix.

  Thank you

  Hussein

• Cloning EBS R12.2 run and patch editions

  Hi all

  I noticed that when I do cloning EBS R12.2, I cloned two race and records editions patch (fs1 and fs2) with identical content but different port pool game.

  My question is, because they have different ports, I can start editions both the two? Start or any of them and use alternately?

  Thank you

  MK

  Yes you can start the services of two file systems (use "forcepatchfs" for the patch file system), but users should be accessing the file system to run only. Start services on the patch file system is required for certain tasks that are usually documented (examples, (1375769.1), (1590356.1) and (1530033.1)).

  More details on the RUN/PATCH file systems found in:

  Concepts of Oracle E-Business Suite

  Oracle E-Business Suite Guide interview

  Thank you

  Hussein

• Installation of the EBS R12

  Hello

  For a user multi installation EBS R12, it is possible to install without logging as root? If Yes, what are the privileges appropriate for the new user of the OS, it can install

  VMahadev wrote:

  Hello

  For a user multi installation EBS R12, it is possible to install without logging as root? If Yes, what are the privileges appropriate for the new user of the OS, it can install

  Yes it is possible, but you will have an application owner user and database level node files.

  If you want user applmgr upgraded node files of own apps and user oracle owning the db level node files then install quick there must be run in as root.

  If you want a user (applmgr and oracle) to have the apps and db level nodes files can install quick there must be running as that user.

  12.2- http://docs.oracle.com/cd/E26401_01/doc.122/e22950/T422699i4773.htm#3708205

  12.1 - Setup guide of oracle E-Business Suite: using quick installation

  Thank you

  Hussein

• Oracle EBS R12 can be implemented on Sun Blade SPARC T4?

  Hello
  
  One of our customers has implemented Oracle EBS 11i, as follows:
  -Oracle database 10 g 2 RAC (node 2)
  Application - single node
  O / s: Sun SPARC Solaris on SPARC v490 servers.
  
  They want to spend to R12. They are curious if R12 is supported on Sun Blade T4 SPARC servers.
  
  Please let me know if Oracle EBS R12 is supported on servers of Sun Blade SPARC T4 - 1B.
  
  Kind regards
  Thiru

  Yes
  Pls check the certification on MOS and also represent
  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) [ID 761568.1]
  Kind regards

• Possible to install Oracle EBS R12 on existing (shell) DB Oracle 11.1.0.7?

  Is it possible to install Oracle EBS R12 on existing (shell) DB Oracle 11.1.0.7?

  user4434301 wrote:
  Ok... I might be crazy, but I couldn't do an install of R12, EBS on a pre-existing 11.1.0.7 DB there in there anywhere. It looked like the regular installation instructions. Are you sure?

  If you mean if you can install R12 with an existing EBS/standalone database then the answer is no.

  If you mean if you can establish software R12 (to upgrade 11i) with an existing EBS database then the answer is Yes.

  I hope it's clean now.

  Thank you
  Hussein

• EBS R12.1.1 database copy windows on windows?

  Hi all
  
  I'm a developer of report. I have two servers (VMs)
  
  Server1: Win 2008, Oracle EBS R12.1.1.
  Server2: Win XP SP3, about to install Oracle 11 g R1
  
  My goal is to copy the entire base of the EBS R12.1.1 Vision Instance (SCREW) on Server1 to 2 Oracle database... And please not that I don't need the data in these patterns - I use to run ETL scripts, so on server 2, I'm not going to run any Applications(Forms, or reports or others) EBS.
  
  To do this I think using http://www.dba-oracle.com/oracle_tips_db_copy.htm, or RMAN method...
  
  Now my questions are:
  1. can I use one of the above methods?
  2. If Yes, for the two methods above, during the installation of target (Server 2) database do I need select the option "Create Starter Database (additional 1482 MB)"? I'm in a crisis of large disk space, so I prefer not to select this option, but can I follow above methods clone with on the creation of a database of startup in the target system?
  
  Thank you and best regards.

  My goal is to copy the entire base of the EBS R12.1.1 Vision Instance (SCREW) on Server1 to 2 Oracle database... And please not that I don't need the data in these patterns - I use to run ETL scripts, so on server 2, I'm not going to run any Applications(Forms, or reports or others) EBS.

  To do this I think using http://www.dba-oracle.com/oracle_tips_db_copy.htm, or RMAN method...

  Now my questions are:
  1. can I use one of the above methods?

  Yes, but if you are not familiar with RMAN or backup/recovery methods is perhaps not easy (or simple) to you.

  2. If Yes, for the two methods above, during the installation of target (Server 2) database do I need select the option "Create Starter Database (additional 1482 MB)"? I'm in a crisis of large disk space, so I prefer not to select this option, but can I follow above methods clone with on the creation of a database of startup in the target system?

  Even if you do not create a new database, you will eventually have the same size of database after you copy files or use RMAN (backup/restore). Size of your target on the target database database will be exactly the same size of database on the source database.

  I would prefer that you use one of the following methods instead of RMAN:

  (1) quick clone (clone the node in database only layer and this is the best option for you) - cloning Oracle Applications V12 with rapid Clone [406982.1 ID]

  (2) the method in the link referenced by you

  (3) export/tax (which takes a lot of time):

  Export/import process for R12 using 11 GR 1 material or 11 GR 2 [741818.1 ID]
  Export/import process for Oracle E-Business Suite Release 12 using 10gr 2 [454616.1 ID]

  Thank you
  Hussein

• How to erase files of forms Dump on EBS R12

  Check the dump forms find file directory a lot of discharge as follows:
  applprod@dfehpap1:/AP01/prod/inst/apps/PROD_dfehpap/logs/ora/10.1.2/forms#ls - ltr frm *.
  -rw - r - r - 1 applprod s/n 705 6 Dec 20:20 frmweb_dump_11132
  -rw - r - r - 1 s/n 691 6 Dec 22:09 frmweb_dump_26506 applprod
  -rw - r - r - 1 s/n 906 7 dec 08:24 frmweb_dump_8172 applprod
  -rw-rw-rw-1 applprod s/n 685 7 dec 08:44 frmweb_dump_14940
  -rw - r - r - 1 applprod s/n 510 7 dec 08:58 frmweb_dump_7388
  -rw - r - r - 1 applprod s/n 490 7 dec 08:59 frmweb_dump_17133
  -rw-rw-rw-1 applprod s/n 701 7 Dec 10:08 frmweb_dump_10105
  -rw - r - r - 1 applprod s/n 899 7 Dec 10:12 frmweb_dump_18495
  -rw-rw-rw-1 applprod s/n 1087 7 Dec 10:12 frmweb_dump_27315
  
  The EBS version: 12.1.2
  Operating system: HP - UX 11.31 Itanium
  
  My questions are: how to clear these core dump files? Why these dump files generated? Should I just delete them? How to prevent these generated again? Is these misdeeds of EBS system dump files?
  
  Thank you
  Jackie

  My questions are: how to clear these core dump files?

  Stop the server forms (or enforcement), delete the file, and then start the services.

  Why these dump files generated?

  How to generate a Stack Trace of forms with Applications R12 [ID 789659.1]

  Should I just delete them?

  Yes.

  EBS R12 RUP5: folder to clean the disc

  How to prevent these generated again?

  You cannot prevent the dump file to be generated.

  Is these misdeeds of EBS system dump files?

  Depends on the content, but usually not.

  Thank you
  Hussein

• OAM in EBS R12

  What exactly is the OAM and how do I use it in EBS R12.

  It is necessary according to the value of the profile option "SQLNet Access" (FND_SQLNET_ACCESS).

  11.5.10 What's new: run SQL * Net hosts access [ID 291897.1]

  And, yes it is safe but try in a test instance first before promoting at the UAT/PROD.

  Thank you
  Hussein

• Installation of Oracle EBS R12 on Linux x 86

  Hello
  
  I want to start the installation of Oracle EBS R12 on Oracle enterprise Linux (version 5.6), downloaded s/w. Like this the 1st time can someone help me how to create staging in detail and how to check checks for OS pre-installation as kernel parameters and packages etc.
  
  Expected answer.

  I have to add the rest of 12 parameters in the sysctl.conf file?

  Yes.

  Thank you
  Hussein

• EBS R12.1 network connection problem

  Hi hussein.
  
  We have the new location of the EBS R12.1.1 in a client with a security network "tight."
  
  My problem is that in a certain Department with the network 192.168.1.xxx segment than the connection of the EBS is fast, while
  the Department with a segment of network 192.168.2.xxx EBS connection is very slow, that has been a very long web pages
  to open it. I can really conclude the customer that it is their network problem. They want to prove that it is.
  
  How to do a basic test for network connectivity? Is the server from the client PC enough EBS 'ping '? We can
  

  C:\Documents and Settings\Administrator>ping 192.168.1.107
  
  Pinging 192.168.1.107 with 32 bytes of data:
  
  Reply from 192.168.1.107: bytes=32 time<1ms TTL=128
  Reply from 192.168.1.107: bytes=32 time<1ms TTL=128
  Reply from 192.168.1.107: bytes=32 time<1ms TTL=128
  Reply from 192.168.1.107: bytes=32 time<1ms TTL=128
  
  Ping statistics for 192.168.1.107:
      Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
  Approximate round trip times in milli-seconds:
      Minimum = 0ms, Maximum = 0ms, Average = 0ms

  The statistics above may give clues to a network connection problem?
  
  
  
  Thank you very much
  
  
  Mrs. Mina

  I guess that's the same thing with R12.1.1?

  -Yes, you can also refer to:

  Compare the needs in bandwidth between the version 11i and 12
  http://blogs.Oracle.com/stevenChan/2007/06/comparing_bandwidth_requiremen.html

  Thank you
  Hussein