Cloning EBS R12.2 run and patch editions

Hi all

I noticed that when I do cloning EBS R12.2, I cloned two race and records editions patch (fs1 and fs2) with identical content but different port pool game.

My question is, because they have different ports, I can start editions both the two? Start or any of them and use alternately?

Thank you

MK

Yes you can start the services of two file systems (use "forcepatchfs" for the patch file system), but users should be accessing the file system to run only. Start services on the patch file system is required for certain tasks that are usually documented (examples, (1375769.1), (1590356.1) and (1530033.1)).

More details on the RUN/PATCH file systems found in:

Concepts of Oracle E-Business Suite

Oracle E-Business Suite Guide interview

Thank you

Hussein

Tags: Oracle Applications

Similar Questions

  • What mobile framework Oracle version and JDeveloper are needed to customize the Oracle EBS R12.2.2 and superior?

    What mobile framework Oracle version and JDeveloper are needed to customize the Oracle EBS R12.2.2 and superior?

    If you want to extend the pages of EBS, you need to use the OA framework for 12.2 version.  There is no native support for the extension of EBS by using ADF pages.

    If you want to build the ADF custom applications that integrate with EBS you can watch using the SDK of the EBS (see My Oracle Support) that offers a number of design patterns to allow you to do.

    With respect to the version of Fusion Middleware based on EBS 12.2, take a look at the notes 1911660.1.  11.1.1.6 is currently the base version supplied with 12.2.4 with the 11.1.1.7 version is the highest version supported.

  • EBS R12.2.4 and 12 Db

    Hi all

    EBS R12.2.4

    rhel6.6

    With 11 GR 2



    Is that ebs R12.2 supports the database of 12 c?

    How to upgrade its 11 GR 2-12 c database?

    Thank you very much

    JC

    Interoperability note EBS Version 12.2 with database 12cR1 (12.1.0.1) (Doc ID 1959604.1)

    Complete the checklist for upgrading to the Oracle database 12 c Release 1 using DBUA (Doc ID 1516557.1)

    These 2 note would be enough for you. In my view, these notes are pretty simple to follow. I would say to create doc once you start the upgrade and follow the same

    concerning

    Pravin

  • EBS R12.1.3 2nd patch

    Hi all

    I apply two patches to our R12.1.3. The patches are not accessories co.

    Can I apply the patch on the other if the other is waiting with the error?

    Thank you very much

    JC

    Hello Jenna.

    You should fix the problems with the current patch and move forward with future patches.

    Kind regards

    Hugues

  • ASIC can run on the same server/db like EBS (R12.1)

    Hello

    We have an EBS (R12.1) environment and intend to use the CPSA. I've seen environments where the CAWC runs in its own environment/database, etc. and connects to an instance of the EBS. Which is the only type of available configuration or can CAWC run fully within an environment of EBS/instance on the same server? If so, what are the consequences of such a configuration, for example on the performance.

    Thank you

    NAT.

    Hi Nat,

    ASIC can be configured in two ways:

    1 centralized - where the EBS and VCP reside on the same application server.

    2 decentralized - where the EBS and CRS are on two different application servers.

    Basically the motor nucleus of CPSA of planning does all the planning in the memory of the application server (and not in the database). This planning process is highly require a lot of resources (memory) and requires a huge memory (according to the data, the type of plan and many other factors). If the application servers are not the right size, this led to the poor performance of the application. And if both the planning and EBS reside on the same server, there are possibilities that you slow the global treatment through the functions of the company. That's why decentralized architecture is preferred, where the planning process running on another remote computer of your EBS and it didn't there in not affecting transactional modules.

    Beyond that, you have the ease of maintenance in terms of correction, update, addition of multiple of VCP modules, if you're on a decentralised architecture.

    Centralized architecture is also not rare. Many companies run their planning and EBS on a single machine.

    I hope that the above gives you a point of view, using which you can choose what suits your business best!

    Kind regards

    Mohan Balaji

  • What JDK to install for EBS R12.0.6 to EBS R12.1.1(on 64 bit linux)

    Hello

    I am upgrading R12.0.6 EBS EBS R12.1.1 and in the process after the 455492.1 document.

    It is said in the document-

    " ..

    Step 3.3: Download the latest JDK 6.0 update

    Click on the appropriate link below to download the JDK on the site that corresponds to the operating system used on the application tier node. Download the 32-bit JDK, not the Java (JRE) runtime environment. Due to the integration of Java and C++ code that is currently available on 32-bit do not choose the 64-bit version, which is not supported on the 10.1.2 House.

    "

    What it means? Under Linux, you just need 32-bit jdk installation?

    After that, I followed the document 1439822.1 and downloaded the next jdk:

    19138237Oracle JDK 6 Update 85

    OCTOBER 14, 2014

    What is the correct jdk for my environment (Oracle AS 10.1.3 on Linux 64 bit)?

    BR,

    Anurag

    What it means? Under Linux, you just need 32-bit jdk installation?

    Yes.

    After that, I followed the document 1439822.1 and downloaded the next jdk:

    19138237 Oracle JDK 6 Update 85

    OCTOBER 14, 2014

    What is the correct jdk for my environment (Oracle AS 10.1.3 on Linux 64 bit)?

    Fix.

    Thank you

    Hussein

  • Advance (AQ) queues for EBS R12

    Hello

    EBS R12.1
    OEL 5.4

    Did someone here used AQ in your EBS R12?

    We have EBS R12 of installation and a separate mini inventory made in APEX on server of Oracle 10 g XE system.

    Both systems interacts with others, each data send/receive on both sides.

    What will be the best solution for this type of installation? AQ is a good option?
    Can you give me the notes metalink on how to set up QA on EBS?
    Or simply create dblinks and do some concurrent programs that send/receive/process data.


    Thank you very much

    Ms. K

    Hello

    Integrate the APEX R12, please check these threads.

    Integration of the APEX with eBS R12
    Integration of the APEX with eBS R12

    How to install the APEX in environment R12
    How to install the APEX in environment R12

    Installation procedure for APEX
    Re: Installation Procedure for APEX

    Advanced for Files, please see the documnetation.

    Advanced Queuing
    http://www.Oracle.com/pls/db102/search?remark=quick_search&word=Advanced+Queuing&tab_id=&format=ranked

    Thank you
    Hussein

  • follow-up activities on eBS R12

    Hello world
    We have eBS R12 on Unix, and we want to monitor all activities that made by implementation partner.
    Is there a possibility to do these activities, including reports, etc..
    Thanks in advance

    Hello

    This is possible by setting "Sign-On: Audit level" profile option.

    Please refer to the following documents for more details.

    Note: 436316.1 - audit: how to audit data and responsibilities?
    https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=436316.1

    Notes; 368260.1 - what the Tables are related to the use of the profile system ' Sign-On: Audit level "?"
    https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=368260.1

    Note: 395849.1 - How do you audit an Oracle Applications user?
    https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=395849.1

    Kind regards
    Hussein

  • Cloning of EBS R12.2.4 with system file to run on fs2

    Hi all

    EBS R12.2.4

    RHEL 6.5

    I am cloning our EBS R12.2.4, who has run the file system on fs2.

    Information on the E-Business Suite environment

    ----------------------------------------

    EXECUTION of the file system: / u01/appvis/SCREWS/fs2/EBSapps/appl

    PATCH file system: / u01/appvis/SCREWS/fs1/EBSapps/appl

    Non-Editioned filesystem: / u01/appvis/SCREWS/fs_ne


    .


    So I copy the folder >/U01/of/SCREWS/fs2/EBSapps


    But when he asks the system base directory target, and I come home >/U01/of/SCREWS

    It will automatically be poppulate records succeeding and default to the fs1

    How can I force it points to fs2?


    Target system Base Directory: / U01/of/SCREWS

    Home directory for the defined target system on/U01/of/SCREWS

    The target system value based filesystem screws/U01/of/SCREW/fs1

    The target system value another file system based/u01/appvis/SCREWS/FS2

    Target Fusion Middleware Home screws/U01/of/SCREWS/fs1/FMW_Home system

    The target value system Web Oracle Home screws/U01/of/SCREWS/fs1/FMW_Home/webtier

    The target value system Appl screws/U01/of/SCREWS/fs1/EBSapps/appl

    The target value system COMMON TOP screws/U01/of/SCREWS/fs1/EBSapps/comn

    Target directory system Instance home [screws/U01/of/SCREW]:

    Thank you very much

    JC

    No it should not be modified in TARGET. in the file system TARGET will remain same as source.

    Of course how do not support this approach, but on source to change the file system to run for FS1 and run adpreclone and check.

    No doubt, when you ran adpreclone on the source, which was executed at this time file system. I just wanted to be sure.

    concerning

    Pravin

  • How do I abort or kill or cancel suspended adoption patch run? (EBS R12.2.4)

    Hi all

    EBS R12.2.4

    OEL 6.5

    Check patches (adoption-status) without previous state, I applied a fix to help:

    phase of adoption $ = patch = 20059164 patchtop = / home/applcrp2/patch_for_application

    But I got the following error:

    Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

    [EVENT]     [EARLY 2015/05/25 15:28:41] Mental health of high-performance database controls

    [EVENT]     [END 2015/05/25 15:28:41] Completed the database sanity checks

    [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

    Log file: /home/applcrp2/CRP2/fs_ne/EBSapps/log/adop/adop_20150525_152806.log

    [STATEMENT] Run adopscanlog utility, by using the command

    "adopscanlog-latest = yes".

    for a list of the log files as well as the snippet corresponding to each log file error message.

    adopted out with status = 2 (failure)


    I tried to run adoption-status and I discovered that there was previous patch hanging series

    How do I kill/clear/demolition and clean up the patch suspended?

    $ adop-status

    Enter the password for APPS:

    Current patch ID of Session: 7

    Name of node node Type Phase status started completed elapsed

    --------------- --------------- --------------- --------------- ------------------------------ ------------------------------ ------------

    Master CRP2 PREPARE NOT APPLICABLE

    APPLY ASSETS 23 MARCH 15 13:15:35 + 08:00

    FINALIZE NOT APPLICABLE

    COMMISSIONING DON'T IS NOT APPLICABLE

    CLEANING NOT STARTED

    Folder synchronization system used in this Patching Cycle: None

    For more information, run ADOPTION Status Report using - option detail

    Generating the ADOPTION status report to the location: /home/applcrp2/CRP2/fs_ne/EBSapps/log/status_20150525_153549/adzdshowstatus.out

    Please wait...

    Done...!

    Help, please...

    Thank you very much

    MK

    Lol demolition Phase is not necessary.

    Don't run cleaning or if you want to apply another /hotpatch so you can continue with the current adoption session.

  • Correct way to run adoption patch cycle - EBS R12.2

    Hi all

    What is the right way to run the patch adoption cycle?

    $ . EBSapps.env < EBS_ROOT > run

    phase of adoption $ = prepare

    $ . patch EBSapps.env < EBS_ROOT >

    phase of adoption $ = apply patches = 123456

    phase of adoption $ = complete

    $ . EBSapps.env < EBS_ROOT > run

    $ Shutdown if apps run?

    phase of adoption $ = failover

    phase of adoption $ = cleaning

    Thank you all,

    JC

    I think these are the right steps for each phase.

    The last of them is not necessary that the synchronization will be performed the next time you run the preparation phase.

    Kind regards

    Bashar

  • adoption of Patching EBS R12.2 error

    Hi all

    EBS R12.2.4

    RHEL6.6

    phase of adoption $ [appcrp@ip-10-0-0-216 MobileApps] = apply patches = 20049473 patchtop = / u01/MobileApps

    Enter the password for APPS:

    Enter the password:

    Enter the password for WLSADMIN:

    Please wait. Validating credentials...

    RUN the file system context: /u01/appcrp/CRP/fs1/inst/apps/CRP_ip-10-0-0-216/appl/admin/CRP_ip-10-0-0-216.xml

    Context file system PATCH file: /u01/appcrp/CRP/fs2/inst/apps/CRP_ip-10-0-0-216/appl/admin/CRP_ip-10-0-0-216.xml

    Run the SYSTEM command: / u01/appcrp/CRP/fs2 df

    Determination of worker of County...

    Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

    [EVENT]     [EARLY 2015/03/20 19:29] Mental health of high-performance database controls

    [EVENT]     [END 2015/03/20 19:29] Completed the database sanity checks

    [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

    Log file: /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

    [STATEMENT] Run adopscanlog utility, by using the command

    "adopscanlog-latest = yes".

    for a list of the log files as well as the snippet corresponding to each log file error message.

    adopted out with status = 2 (failure)

    [appcrp@ip-10-0-0-216 MobileApps] $ adopscanlog-latest = yes

    Analyzing the log u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log file...

    /U01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log:

    ----------------------------------------------------------------

    #(27-31) lines:

    [PROCEDURE] [EARLY 2015/03/20 19:29:01] Staging of the current session

    [PROCEDURE] [END 2015/03/20 19:29:01] Staging of the current session

    [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

    [PROCEDURE] [EARLY 2015/03/20 19:29:01] Unlock sessions table

    [STATEMENT] Unlock ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and number of tent 2

    =============

    [ec2-user@ip-10-0-0-216 ~] $ vi /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

    Log file: /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

    [EARLY 2015/03/20 19:28:40] Arguments passed to adoption

    phase = patch = 20049473 patchtop = / u01/MobileApps

    [END 2015/03/20 19:28:40] Arguments passed to adoption

    [EARLY 2015/03/20 19:28:40] Check the settings

    [END 2015/03/20 19:28:58] Check the settings

    [STATEMENT] Sourcing of the editing of run environment: /u01/appcrp/CRP/fs1/EBSapps/appl/APPSCRP_ip-10-0-0-216.env

    [EVENT]     [EARLY 2015/03/20 19:28:59] Verification of the requirements of ENV

    [EVENT]     [END 2015/03/20 19:29] Verification of the requirements of ENV

    [STATEMENT]  With the help of 4 workers (default: 4, recommended maximum limit: 62)

    [PROCEDURE] [EARLY 2015/03/20 19:29] Determine the admin node

    [STATEMENT] Node admin: "ip-10-0-0-216.

    [PROCEDURE] [END 2015/03/20 19:29] Determine the admin node

    Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

    [EVENT]     [EARLY 2015/03/20 19:29] Mental health of high-performance database controls

    [EVENT]     [END 2015/03/20 19:29] Completed the database sanity checks

    [PROCEDURE] [EARLY 2015/03/20 19:29:01] Acquisition of a lock on the sessions table

    [STATEMENT] Locking ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and the number of tent 2

    [PROCEDURE] [END 2015/03/20 19:29:01] Acquisition of a lock on the sessions table

    [EVENT]     [EARLY 2015/03/20 19:29:01] Check that the waiting for sessions

    [PROCEDURE] [EARLY 2015/03/20 19:29:01] Control assets /hotpatch session

    [STATEMENT] Fetch the number of incomplete cycles for ip-10-0-0-216 with appltop_id = 195.

    [STATEMENT] value of incomplete_session: "0".

    [PROCEDURE] [END 2015/03/20 19:29:01] Control assets /hotpatch session

    [STATEMENT] Master Session ID: UNDEFINED

    [PROCEDURE] [EARLY 2015/03/20 19:29:01] Staging of the current session

    [PROCEDURE] [END 2015/03/20 19:29:01] Staging of the current session

    [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

    [PROCEDURE] [EARLY 2015/03/20 19:29:01] Unlock sessions table

    [STATEMENT] Unlock ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and number of tent 2

    [PROCEDURE] [END 2015/03/20 19:29:01] Unlock sessions table


    ==============


    [appcrp@ip-10-0-0-216 ~] $ adop-status

    Enter the password for APPS:

    Current patch ID of Session: 3

    Name of node node Type Phase status started completed elapsed

    --------------- --------------- --------------- --------------- ------------------------------ ------------------------------ ------------

    CRP2 slave FS_CLONE COMPLETED 5 November 14 03:59:33 - 04:00 November 5, 14 04:54:56 - 04:00 0:55:23

    PREPARE NOT APPLICABLE

    APPLY NOT APPLICABLE

    COMMISSIONING DON'T IS NOT APPLICABLE

    CLEANING DON'T IS NOT APPLICABLE

    Folder synchronization system used in this Patching Cycle: full

    For more information, run ADOPTION Status Report using - option detail

    Generating the ADOPTION status report to the location: /u01/appcrp/CRP/fs_ne/EBSapps/log/status_20150320_194359/adzdshowstatus.out

    Please wait...

    Done...!

    Please see

    ORA-20001: unable to set editing ORA-06512: has the jump "APPS.ad_zd" job: egosdaci.sql on the appsad_zd build (Doc ID 1989739.1)

    https://support.Oracle.com/epmos/faces/PatchDetail?RequestId=18488991&_afrLoop=191137541272365&patchId=20183051%3AR12.ego.D&_afrWindowMode=0&_adf.CTRL-State=5jicoeb2j_165

    AppsMAsti
    sharing is caring

  • Cloning of EBS R12.2

    Hi all

    EBS R12.2

    RHEL 6.6

    I am cloning our R12.2 EBS on RHEL 6.6

    Inventory global loc = /etc/oraInst.loc

    Journal: /u01/oraInventory/logs/install2015-05-23_04-13-51AM.log

    contextFile:/u01/appvis/VIS/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/prereq/oui/agent_prereq_context.xml

    The entry point is: oracle.installType.all

    Check the name: CertifiedVersions

    Check the Description: it is a precondition to check whether or not the Oracle software is certified on the current o/s.

    Expected result: one of the oracle-6,oracle-5.8,oracle-5.7,oracle-5.6,enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11

    Actual result: redhat 6, 6

    Full version. The result of this review is: failure of < < < <

    But it will not pass the validation prior becase RHEL 6.6 is not in the list. How can I add this version?

    I know that I have done before, but I forgot the file to edit

    Help, please...

    Thank you very much

    Maria

    Hi Bashar and all,

    Problem solved by keeping at least a line PACKAGE which is valid or existing

    Thank you...

  • Cloning of error EBS R12.1

    Hello

    EBS R12.1 on OEL 5.4

    I am cloning our EBS R12.1, but I got this error:
    Executing service control script:
/u01/applr1211/VIS/inst/apps/VIS_server01/admin/scripts/adoacorectl.sh start
script returned:
****************************************************

You are running adoacorectl.sh version 120.13

Starting OPMN managed OACORE OC4J instance  ...

adoacorectl.sh: exiting with status 204

adoacorectl.sh: check the logfile /u01/applr1211/VIS/inst/apps/VIS_server01/logs/appl/admin/log/adoacorectl.txt for more information ...


.end std out.

.end err out.

****************************************************


Executing service control script:
/u01/applr1211/VIS/inst/apps/VIS_server01/admin/scripts/adformsctl.sh start
script returned:
****************************************************

You are running adformsctl.sh  version 120.16

Starting OPMN managed FORMS OC4J instance  ...

adformsctl.sh: exiting with status 204

adformsctl.sh: check the logfile /u01/applr1211/VIS/inst/apps/VIS_server01/logs/appl/admin/log/adformsctl.txt for more information ...


.end std out.

.end err out.

****************************************************


Executing service control script:
/u01/applr1211/VIS/inst/apps/VIS_server01/admin/scripts/adoafmctl.sh start
script returned:
****************************************************

You are running adoafmctl.sh version 120.8

Starting OPMN managed OAFM OC4J instance  ...

adoafmctl.sh: exiting with status 204

adoafmctl.sh: check the logfile /u01/applr1211/VIS/inst/apps/VIS_server01/logs/appl/admin/log/adoafmctl.txt for more information ...


.end std out.

.end err out.

****************************************************
    04/22/10-20:21:10 :: adoacorectl.sh version 120.13


04/22/10-20:21:10 :: adoacorectl.sh: Stopping OPMN managed OACORE OC4J instance

opmnctl: stopping opmn managed processes...
================================================================================
opmn id=server01.centralbiz.biz:6200
    no processes or applications matched this request

04/22/10-20:21:10 :: adoacorectl.sh: exiting with status 150


================================================================================


04/22/10-20:21:29 :: adoacorectl.sh version 120.13


04/22/10-20:21:29 :: adoacorectl.sh: starting OPMN if it is not running

opmnctl: opmn is already running.

04/22/10-20:21:29 :: adoacorectl.sh: Starting OPMN managed OACORE OC4J instance

opmnctl: starting opmn managed processes...
================================================================================
opmn id=server01.centralbiz.biz:6200
    0 of 1 processes started.

ias-instance id=VIS_server01.server01.centralbiz.biz
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
--------------------------------------------------------------------------------
ias-component/process-type/process-set:
    default_group/oacore/default_group/

Error
--> Process (index=1,uid=142035787,pid=17959)
    failed to start a managed process after the maximum retry limit
    Log:
    /u01/applr1211/VIS/inst/apps/VIS_server01/logs/ora/10.1.3/opmn/default_group~oacore~default_group~1.log


04/22/10-20:22:47 :: adoacorectl.sh: exiting with status 204

==================


04/22/10-20:22:47 :: adformsctl.sh version 120.16
04/22/10-20:22:47 :: adformsctl.sh: starting OPMN if it is not running

opmnctl: opmn is already running.

04/22/10-20:22:47 :: adformsctl.sh: Starting OPMN managed FORMS OC4J instance

opmnctl: starting opmn managed processes...
================================================================================
opmn id=server01.centralbiz.biz:6200
    0 of 1 processes started.

ias-instance id=VIS_server01.server01.centralbiz.biz
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
--------------------------------------------------------------------------------
ias-component/process-type/process-set:
    default_group/forms/default_group/

Error
--> Process (index=1,uid=142035788,pid=18107)
    failed to start a managed process after the maximum retry limit
    Log:
    /u01/applr1211/VIS/inst/apps/VIS_server01/logs/ora/10.1.3/opmn/default_group~forms~default_group~1.log


04/22/10-20:23:23 :: adformsctl.sh: exiting with status 204

==============================


04/22/10-20:23:23 :: adoafmctl.sh version 120.8


04/22/10-20:23:23 :: adoafmctl.sh: starting OPMN if it is not running

opmnctl: opmn is already running.

04/22/10-20:23:23 :: adoafmctl.sh: Starting OPMN managed OAFM OC4J instance

opmnctl: starting opmn managed processes...
================================================================================
opmn id=server01.centralbiz.biz:6200
    0 of 1 processes started.

ias-instance id=VIS_server01.server01.centralbiz.biz
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
--------------------------------------------------------------------------------
ias-component/process-type/process-set:
    default_group/oafm/default_group/

Error
--> Process (index=1,uid=142035789,pid=18262)
    failed to start a managed process after the maximum retry limit
    Log:
    /u01/applr1211/VIS/inst/apps/VIS_server01/logs/ora/10.1.3/opmn/default_group~oafm~default_group~1.log


04/22/10-20:24:05 :: adoafmctl.sh: exiting with status 204

=========================
    Thank you very much

    MsK

    Hello

    Please see if the solution to (Note: 412980.1 - oafm, forms and the oacore does not start after change of IP address) help.

    Kind regards
    Hussein

  • patch applTier in ebs R12 RAC environment.

    Dear Sir

    Please give me some ideas how to fix in the CARS and approx.
    I have patched in single instance before but never in the CAR with several nodes.
    I have
    dbTier = 2 node RAC database 10.2.0.4
    ApplTier = 2 nodes (ebs R12 rub6)
    should I run adpatch on the two applTier?

    Thanks in advance for your help.

    Kind regards

    Hello

    in 2 appl environment, be it records the same patch to the database two times?

    It will be saved once, so if you query AD_BUGS for the patch, you will find an entry.

    Kind regards
    Hussein

Maybe you are looking for