HotSync and 3rd Party apps

This feels like a very basic question, but I do not know the answer.

Computer is my computer 'primary', and that's where I'm updating all my Palm Desktop info.  B is my secondary computer, and that's where I install of 3rd party applications.

When I run a Hotsync on comparison, it seems to run much faster than on CompB.  CompB seems to be updating many of the 3rd - party than comparable programs.

This observation is correct?  If so, is there a way I can make sure that all my apps are updated when I run HotSync on computers?  Or is this a limitation of some applications that they can only be correctly updated from the computer on which they were installed?

Thank you.

It depends on what applications you use. Some third-party applications come with their own lines and these programs will synchronize only when lines are there. So, if the lines are only on the computer b which is the only computer that the program will synchronize with. If you want to be updated on both computers, you must have the program and the pipes installed on both computers.

Message relates to: Centro (Sprint)

Tags: HP Tablets

Similar Questions

  • Quarter playback controls when the 3rd party app plays

    When a 3rd party application plays on my iPhone (Audible, Castro,...), my Apple Watch does not show the playback controls to it. Wait for the watch to show the same controls as the control center on my iPhone. But it shows a Play button and gray < <>> / buttons. Volume controls work well and when I press the play button, the 3rd party app is dimmed and the iOS app music begins to play.

    I'm doing something wrong?

    iPhone 6 s more - iOS 10.0.1

    Apple Watch series 2 - Watch OS 3.0

    Hello

    Audible or Castro iPhone applications currently include an app for Apple Watch:

    I suggest that you see the respective developers support resources and/or consult the developers directly on the contribution of functionlity for their applications on Apple Watch:

  • How to determine or make a 3rd party app by default? As Acrobat reader for PDF files?

    I use a PDF with forms to fill out for my business, and when I open the PDF file, the forms are not to fill in the 'default' program that opens to them. I need to change the default application in Acrobat reader or another 3rd party app.

    You cannot have a third-party application a default application.

  • I can't open select Library of Photos photo of 3rd party app. Will receive access the pictures library to open the library file is grayed out

    OS X 10.11.1 pictures 1.2

    When I try to open the photo of the order open menu file of 3rd party apps (for example, an application in edition on my hard drive or on the web) and access my library of Photos, the library is either gray out and inaccessible, or it is not grayed out, but when I select it it does not e access to individual photos, but instead tries to open the entire library. How to select individual photos, modify or download programs on the web?

    You don't ever open the photo library - you use the browser to media at the bottom left of each window of download/tie/open under media ==> photos--> Photos

    LN

  • How to see pictures when you attempt to download a 3rd party app?

    It is a real noob question, but how do I see my pictures when you attempt to download a 3rd party app?

    When I open the file I see an icon and the file name but not actually as a thumbnail image. How do I change this setting?

    Hello
     

    Here's how you can change this:
    a. Once you are in the Explorer window to select the image, right click on the space empty.
    b. highlight the option to consult.
    c. choose the medium-sized icons.
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Create the function of responsibility which would pass parameters to 3rd party app

    Hello all,.

    My organization uses Oracle HRMS but no payroll. We try to convert them into electronic heels and have developed a 3rd party app, but we do not want users to have to use a separate password for our instance of EBS. Is it possible to create a function to attach to the responsibility of the employee self-service that will launch the 3 web part app and validate the information as user_id to spend?

    Thanks in advance!
    Kristopher

    Hello

    You can use pageContext.putSessionValueDirect () API to do this, as this API set parameters directly in the HTTP session as

    pageContext.putSessionValueDirect ("Parameter1", value1);
    pageContext.putSessionValueDirect ("Parameter2", value2);
    pageContext.setForceForwardURL ('Page URL',
    NULL,
    OAWebBeanConstants.KEEP_MENU_CONTEXT,
    NULL, null, true,
    OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
    OAWebBeanConstants.IGNORE_MESSAGES);
    }

    It could be useful!

    Ajay

  • How Oracle Clusterware Oracle RAC and 3rd-party Clustering with them

    I have some questions on how Oracle, Oracle RAC and 3rd party clustering CLusterware fit between them.

    Q1. My understanding is that the Infrastructure Grid Oracle Clusterware is Oracle's Clustering solution that allows applications to cluster? that is, it is a general clusterware solution to compete with those already on the market. Is this correct?

    Q2. So why CARS is necessary for the Oracle cluster databases? An Oracle database is not just considered one application like any other? So why can not just use you GI / Clusterware to gather what you would do for any other application? Why so you need RAC to the Clusterware Summit?

    Q3. Is it is possible to combine an Oracle database using 3rd party of clustering and not use Oracle Clusterware and CARS at all that is can you say cluster, an Oracle database using say Sun Clusters, Clustering AIX or Linux native same clustering?

    Q4. If the RAC is purely for Oracle Cluster databases - what is with the title "Real Application Clusters"? What's real on this subject?, what to ask?

    Q5. I also read that RAC can use 3rd party of clustering. However if you decide that this is the case, then you need to install Oracle Clusterware when even (I think for interconnection must be created to allow the merger with Cache between Instances of node?).

    Is this the case?  If yes why never bore you with 3rd party clusters? -Since you will have to install Oracle Clustering anyway - and I probably have to license (all I can think about is the scenario that you already have a cluster of 3rd party in place and you decide that you need to use the same material for a database cluster)?

    All wisdom greatly appreciated,

    Jim

    Yes, with 10g, you had to use the CRS, and with 11g, to use the GI.  For 9i RAC, you would use Verits Cluster and Sun Cluster or anything else.

    11g RAC to GI.  As above, you can use clusterware extra if needed.  I gave the example above where to a 10g RAC we used the CRS to the cluster database/listener/vip and allowing groups of volume and filesystem in HACMP cluster.  File systems were not shared, but could switch to another node failure node, who has been treated by HACMP.  The volume of the groups containing the raw devices were shared volume groups.  For 11g, I never used extra clusterware on top of CRS and have always used ASM which is part of the GI.

    The application provider only certified database to run on 10g on AIX with raw devices.  What is strange about that?  It would be unusual that you probably expect to use ASM instead of raw devices, but it is what it is.

    See the following Note of Oracle for more information: using Oracle Clusterware with vendor Clusterware FAQ (Doc ID 332257.1)

    It is perhaps easier to explain if you can explain what problem you are trying to solve?

  • 3rd party apps stock tv turns off

    I bought an Apple TV 4 and I really like it.

    I have a receiver with speakers, and a TV connected to the HDMI port out of the receiver. Apple TV is connected to the receiver with HDMI.

    The only problem I have is that I installed two applications of radio to listen to my local radio station, but two of them stutter (IE as the app refresh of the stream after every 5 seconds) when I turn off the TV and the receiver stays on (audio only then hollow speakers connected to the receiver).  All stock apps work well (music, Podcast, sharing of computers/Home). There is also no problem with these two apps as long as the TV.

    There is a general problem with 3rd party applications or is it just bad luck so I downloaded have the same problem?

    It is not apps, it is because you do not have your on TV.

    Users have experienced different results when you try to use the Apple TV for audio only. Some have found it works well, others have found that they need to have the TV on get audio and others have found that they need the TV to start with, but may turn off when the audio starts to play.

    I suspect these variations result from the type of connection that the TV offers and therefore may vary depending on the make and model of TV.

  • BlackBerry Smartphones 3rd Party App - Upload.

    All, morning

    Used this forum a few times, but did not have need to post (up to now).

    Company I work for has a 3rd party application that works in all areas (BB, symbian, Android phones, iphone etc etc) and we are trying to put the application on the BB App World.

    Problem is, it is a Web application. The iPhone appstore doesn't seem to have a problem with that, web promotion apps and enabling them to be easily accessible to clients and so on... I didn't know a lot about being available on the AppWorld Web applications. I have a Bold9000 (+ App World) and have not met any info or a separate section for downloads webapp.

    Thus, the WebApps are available for download through the AppWorld? If so, how do I submitt a BlackBerry and what are the costs?

    The developer, FAQ guides, features, etc., are listed here on this page

    http://NA.BlackBerry.com/eng/developers/appworld/

  • HTTP requests from 3rd party app on BlackBerry consumer

    We have an application that performs a lot of (not through the browser) HTTP requests. Our internal testing is done on devices activated per BES. I've heard reports occasional external users that communications is a failure and I guess that carriers are restricting certain types of HTTP requests. (Also, I see that Viigo has download separately for consumer and Enterprise devices).

    I got the impression that HTTP requests are OK as long as they were not on the user interface thread. Can someone point me to a single set of rules or practices for HTTP requests from applications 3rd party on consumer phones?

    See you soon,.

    Tom

    Please see this link for a list of the available routes to make a connection over HTTP.

    What - in different ways to establish an HTTP connection or socket
    Article number: DB-00396

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  • Smartphones blackBerry lost all my 3rd party apps when I passed my OS

    Hello, last night I changed my OS for my bb bold 9000 for 5.0 to 4.6 att because the application memory is still extremely low and the phone is generally slow. During the process, I received a notification that a fatal error has occurred and that I needed to use the backup file that was created. I was able to restore the file, but all my downloads 3rd party lacked such themes, uber twitter, fb, etc. This morning, I've switched back to the 5.0 os and used the same restore file, but they are still not there. Any ideas/suggestions?

    You will need to download and reinstall them.

    For Facebook, from your BlackBerry browser, go to www.blackberry.com/facebook

    If you have installed the AppWorld paid applications, they should be listed in your AppWorld again once you have entered your PayPal account information.

  • (1) in windows 8 pro can I run windows defender and 3rd party antivirus [like Mcafee] at the same time?

    Today, I have improved my final from Windows 7 to Windows 8 pro.

    (1) is Windows Defender, it works both as the same as MacAfee antivirus software?

    (2) if I use windows defender in windows 8 pro, do you think that I still need 3rd party antivirus software to protect against viruses and malware?

    (3) can I activate and simultaneously run 3rd party software [McAfee] antivirus and windows Defender 8?

    (1) # Windows Defender is an anti-spyware, and Mcafee's anti-virus.

    (2) Yes

    (3) Yes

    UTC/GMT is 03:46 Sunday, October 28, 2012

  • Integration with 3rd Party App

    We currently use a 3rd party called media 1 channel to carry out the investigation or to submit and Enter to Win forms.  Now, that exist outside of the Eloqua platform.  Is there a way to integrate this information?  Have send their form, survey, etc. flow directly in Eloqua.  I talk about them using a form Eloqua and here are their concerns:

    "Eloqua had an open API, we could use to send data in the database? This would probably include a function we call that sends to your server of an object that contains the data that is appropriate; probably json or other type that when received them by your server would be analyzed and added to the critical database.

    If I'm wrong and that you do not have this form of API; in the txt file you provided the submission form called a file, we could potentially call it directly within our applications and Web sites and pass it the correct information, but we need to coordinate the information exactly. In addition we are a validation uncompressed js file so we can ensure that the validation is rewritten correctly to our projects. »

    Hi Megan,

    Eloqua has many options with regard to sending data to the Eloqua system. You can get all data from any system for contacts and send it to Eloqua. Look at the platform of the building on The Eloqua - A Resource Guide to get started. Indeed, if nothing else, you can transfer the form submiited from your site or application data directly in Eloqua and perform various other process forms: overview of processing &.

    I hope this helps.

    Thank you

    Amit

  • SQL Developer and 3rd party driver: JavaDB

    Come on the last 3rd party drivers for MySQL and & lt; Ugh & gt; MS Access & lt; / Ugh & gt; But what I'm looking for is a third-party driver for Apache_derby JAVADB. Anyone?
    Add manually the derby.jar in third-party drivers under preferences seems to do nothing in the GUI of SQL Developer.

    Adding the jar file updates the driver on the classpath, but you must establish a jdbc connection yourself for you connect to this.
    In 2.0, we offer generic JDBC connections available in 2009
    B

  • 3rd party app mirroring phone standby, even if mirroring disabled

    I just got an iPhone 7 and when I associated my watch it I realized that I had never updated the watch to monitor OS 3. So I did it. Now, a third-party application email (my mail), which isn't even an app, that I put on my watch, push notifications to my watch, despite the fact that I put the mirror app is not my iPhone. This iphone app is the one I use for what I call my spam account. These aren't urgent personal emails. That's 40% off at the Gap stuff. I don't want to turn off notifications on my phone, but I really want to stop my wrist of buzzing with these dumb e-mails nonstop. Any ideas of what I can do to stop a third-party application from mirroring my phone, when I use the rocker to say don't mirror phone doesn't seem to be enough?

    Hello

    The following steps should help:

    • Toggle Notifications of setting and then turn off again, allowing a few moments between the two.

Maybe you are looking for