HotSync locks after that loss of data has been restored

Similar Questions

• How can I reinstall Indesign after that my hard drive has been deleted?

  How can I reinstall Indesign after that my hard drive has been deleted?

  After obtaining a hard drive in working condition, you can reinstall the software using the discs if you bought the discs, or you can download your software as a trial version and use your original serial number to activate it.

  If the software is the latest version, you can download it from the Adobe product pages.

  If the software is an older version, you can download the demo version of the software using the link below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download on this site.

  http://prodesigntools.com/tag/DDL

• On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

  Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

  I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

  If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

  Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

  I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error access denied after that a search bar has been removed unwanted

  Hello

  Microsoft installed IE11 without asking and installed a search bar that my security program deleted. So far so good as I wanted it not when even only I get an error message at startup. I found the search bar in IE and disabled (I can't find not the implementation) I cold remove one entry, but another is to the user, the application owner data. Applicationdata I get accses denied. As soon as I can remove this pest I disable the automatic update and get rid of IE11 to return to the previous which is more useful without all the garbage of IE11. Thanks for helping me to use my PC without MS is to control what I can and can't do.

  I paid US $265 more overcharging for shipping and always have a limited use of Ms.

  Hello

  I think that there is no solution to my problem as denial of access cannot be turned off or bypassed since I got no. sugestions how to do but only questions. I can not even open appdata. Thanks for trying.  ALF

  Hello

  No, I do not have a useful answer, but I finally found the solution myself. Conduit was the bigest like her problem embedded in more than a dozen locations and registers.

  Thanks a lot anyway.

  ALF

• Windows 7, slow start, after that initial windows backup has been done internally SATA 3 to disk

  Any new installation of Windows 7 on a CORE I7, SSD as the first disk, and WD3TB as the backup Z: drive

  If the 3 TB is freshly formatted, "starting Windows" takes about 8 seconds.

  Copy 150 GB of data on the 3 to, start-up time is not affected.

  Then after the initial backup of Windows is made for 3 to on the next restart and subsequent reboots, "Starting Windows" ~ 50 seconds.

  Checked on another PC and other tests on a CORE i5 - 3570 K 3.4 GHZ with SSD as C: and WD3TB as the backup.

  The fix was to change the windows of formatting of the allocation size of the 3 TB to 64K, the default value is 4 k.

  Calculation of the allocation size and time to "starting Windows":

  After a backup on the CORE i5;

  Alloc Time seconds

  2K 85

  K 4, 57 (default Allocation size)

  8K 32

  16K 19

  32K 13

  64K 11

  Before a backup: it is freshly formatted

  4K 8

  Hello

  The question is more suited in the TechNet forums. So I would say you mention the link and send the request in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

  For any information related to Windows, feel free to get back to us. We will be happy to help you.

• 8 app Windows do not work after that a Windows Update has been applied

  Hi, I installed windows 8 this morning and everything worked. Then it applies updates and now none of the applications really work, instead I just get a white screen and app store just gets stuck while loading. Any suggestions?

  Thanks Scott

  Hi thanks for all that. It seems it was my Kaspersky Internet Security 2013... Uninstalled and reinstalled and now everything works

  Thank you very much
  Scott

• How can I reinstall Windows 7 after that my hard drive has been cleaned?

  When I bought my computer, it had Vista on it. I bought and installed Windows 7 later. I just got my hard drive rubbed, and now I'm back to Vista. How to make Windows 7 again? I don't have the product key.

  Hello

  contact where / who you bought Windows 7 from and have your receipt available for purchase when you contact them

  read the information on how to replace the software, etc.

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Don't see the screen applications & data after the update means that your data has been erased?

  I've just updated to iOS 10 and there is installed, but it shows a screen called Apps & data and gives options to restore the data, set it up as a new iPad or move data from Android. I was wondering if it meant that my data has been deleted completely?

  It's an iPad running iOS 10 4.

  Yes. This screen is available only after a deletion.

• I think I received a text of scam, to say that my ID Apple has been locked and offering a link to fix the problem.  Has anyone received it?

  Today I got a text from a mobile phone no, informing me that my ID Apple has been locked.  I did not answer or clicking on the link sent in the message, because I suspect that it's maybe a scam.

  I was able to connect to Apple in order to send this message, which proves that the text is not authentic. I just want to warn others.

  Hello

  Clicking on the link, you have made the right choice.

  You can report the message to Apple by following the steps detailed here:

  Block the phone numbers and contacts or filter messages on iPhone, iPad, or iPod Touch - Apple Support

• After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  And this is not recognitze by any device, computer or iPhone 6plus.

  If you or the original owner did not have the password no one here or at Apple can help you.

• Why not my wireless capability on again after that an unexpected shutdown has occurred?

  Why not my wireless capability on again after that an unexpected shutdown has occurred?

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with wireless capabilities does not not after stopping.

  Method 1: run the troubleshooter and check if it works.

  Using the troubleshooter from network in Windows 7

  Method 2: Perform the steps from the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/why-am-I-being-disconnected-from-my-network

  Meet us if you experience problems with the wireless connection or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files

  I'll provide too much information because those of us who are computer knuckleheads think that everything is important since it is a mystery to us.

  My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files. There are four years of e-mails in these files and critical that I be able to open them.

  My only working computer running XP. It has Outlook Express is installed on it and was once used for e-mail, but not more and not implemented with my ISP to send or receive if it matters at all. Other that the sending and receiving of all the other functions of the OE program appear to be operational.

  I have read many explanations on how to open the files dbx on different sites - all is completely different and most seem well beyond my skill level.

  There is a fairly painless way to open these files? I don't want to try anything that could damage them. Please... any solution please guide me through in its simplest form - I am 64 but pretend you are explaining the process to a 7 year old. Yes, I'm that lame!

  Sorry for writing a novel and thank you to all who take their time to help the ignorant!

  I advise you to immediately copies of your DBX files restored. Save the duplicates in a place safe, and don't mess with them.
  Then try using one of the various tutorials that you have found on the Internet by using a copy of your DBX files restored.
  I did it a few times, but years ago and I DBX http://www.techrepublic.com/forums/questions/how-i-open-corrupted-dbx-files-in-oe/ visualization tool
  You just continue to make attempts, using a tutorial after another.
  As long as you have these unchanged copies of backup of your DBX files, you should survive it - other than frustration. Email PC remains a mess.

• data has been replaced before it can be read by the system

  Hello

  I use a flow sensor that creates a frequency output and which connected to my PCI-6035E. When I run it, it works for a few seconds and then gives an error. Error 200141 ' data has been replaced before it can be read by the system. " I also tested with a pulse rather than the flow sensor generator, and the error only when I changed the frequency. How can I solve this prolem?

  Thanks in advance!

  Thank you for your answers, Bob.

  I got it now works, the problem was that I was using continuous samples. I am now a single sample with a while loop and it works.

• Add or remove programs? Uninstall it says invalid or data has been corrupted, will not continue.

  Add or remove programs. The program I want to uninstall it is Printmaster 150.00 MB. I tried to uninstall it but uninstall it says invalid or data has been corrupted,

  will not continue. How to get out he computer?

  If you have the original installation media, a method that often works when an uninstall program is corrupt is to reinstall the app and then uninstall it.

  Otherwise, you could try free Revo Uninstaller or see http://ths.gardenweb.com/forums/load/comphelp/msg081415488395.html (unfortunately, the link to the manual uninstall instructions doesn't work; support for Broderbund software has been adopted by Encore.com, the search engine it leaves something to be desired; however, you can ask for help in a forum yet http://forums.encoreusa.com/).

  How to contact Technical Support (it is not clear if all Printmaster versions are still supported; I would try telephone assistance rather than on the web):
  http://forums.encoreusa.com/TM.asp?m=24071&mpage=1&key=%E5%B8%87

  The following (below the line *) comes from a post on the support forums forum moderator yet.  I have not linked to it because earlier in the post, it is suggested to use a registry cleaner in the manual uninstall.  Certainly, I do NOT recommend to use any registry cleaner.

  *************************************************************************************************************
  NOTE: this message does not apply to PrintMaster 2.0 or Print Shop 2.0.

  Broderbund programs, including (but not limited to) print shop, PrintMaster, designer of Scrapbook memories of creation and creator of calendar, are installed in the Program Files folder where most of the software are installed. However, many Broderbund programs will install also files and folders in other places on the hard drive.

  When one of these programs of Broderbund is uninstalled because it is suspected that the installation is corrupt, it's always a good idea to make sure to manually delete all the files and folders stored on the hard drive that are not deleted automatically during an uninstall normal - to ensure that all corruption is removed before the program, is reinstalled.

  Here are the paths of the additional folders where Broderbund software is commonly installed:

  Windows XP: C:\Documents and Settings\All Users Data\Broderbund logiciels\Print

  and

  C:\Documents and Settings\ [your user name] \Local Settings\Application Data\Broderbund logiciels\Print

  WinVista/Win 7: C:\Users\All Users\Broderbund logiciels\Print

  and

  C:\Users\[your-username]\AppData\Local\Broderbund logiciels\Print.

  and

  C:\ProgramData\Broderbund logiciels\Print

  **********

  PrintMaster address books can be accessed from and saved to the BOOKS folder that is a subfolder of the folder prints shown below (PrintMaster address books may be accessed from or saved to the Documents folder)

  Windows XP: C:\Documents and Settings\All Users Data\Broderbund logiciels\Print

  WinVista/Win 7:Print and C:\Users\All Users\Broderbund logiciels\Print logiciels\ C:\ProgramData\Broderbund

  (As you can see, when PrintMaster address books are registered under WinVista and Windows 7, they are saved in two files).

  For example, the address for PrintMaster 18 books would be saved in these folders on WinVista or Windows7 computer

  C:\ProgramData\Broderbund Software\Print\PrintMaster\18.0\Books

  C:\Users\All Users\Broderbund Software\Print\PrintMaster\18.0\Books

  To make sure that saved the address books are not deleted during the uninstall process, they must be saved prior to PrintMaster is uninstalled. When these address books are restored, it will be necessary to restore these in the same two folders address books - because an address book will not appear in the file. Open list, if not in the two files.

  Address books print shop can easily be stored in the Documents folder. So, if you have registered your address books in the Documents folder, it is not necessary to save the address book before you uninstall the print shop.

  **********

  Files that control the Project Gallery and the Art Gallery are stored in the folders of ART PROJECTS & which are subfolders of this folder to print

  Windows XP: C:\Documents and Settings\ [your username] \Local Data\Broderbund logiciels\Print

  WinVista/Win 7: C:\Users\[your-username]\AppData\Local\Broderbund logiciels\Print.

  For example, ART & for PrintMaster 18 PROJECT files would be in this folder on WinVista or Windows7 computer

  C:\Users\[your-username]\AppData\Local\Broderbund Software\Print\PrintMaster\18.0\PROJECTS

  Because these files can easily become corrupt if the video card driver is out of date or corrupted, the program folder that has been uninstalled (in this case, the folder 18.0) must be removed before the program is re-installed. It is completely safe to delete the folder PrintMaster - because a new facility this 18.0 folder will be performed when PrintMaster is uninstalled.

  If there is only one version of PrintMaster installed on the computer, the PrintMaster folder in this example could also be deleted safely.

  **********

  It is not absolutely necessary to remove the Adbook.exe file that controls the program PrintMaster addressbook. But it's always a good idea to know that this file is installed in this folder

  C:\Program Files\Fichiers Files\Broderbund\UMM

• Item that this shortcut refers has been changed or moved

  Can I install a game on my other laptop and even though it has all the icons it will give an error when I try to play "item that this shortcut refers has been changed or moved" when I know that it is not.  I am at a loss to know why. There was no upgrade or what it's done for her.  I have laptop and games and programs work very good about it.

  Hi gearbrain,

  It's happening to all the applications installed on your computer?

  You can try again to create a shortcut and check if it works.

  This problem occurs because of a Microsoft Windows function that does not structure memory shortened correctly if the shortcut (.lnk file) has a goal less of 14 characters.

  To work around this problem, set the shortcut read-only. To do this, follow these steps:
  1. right click on the shortcut and then click Properties.
  2. click on the general tab.
  3. Click to select the read-only check box, and then click OK.
  Check whether the problem is resolved.

  You can try to create the new user account by following the instructions in the link below and check if it works.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP