How Autostart is supposed to work for invited NT4?

Similar Questions

• How are we supposed to work with the new motion tweens if there is no editor of motion more?

  How are we supposed to work with the new motion tweens if there is no editor of motion more? Without query editor, we can see what kind of key frames are defined and we cannot set acceleration anywhere. Adobe go us back and use the old motion tweens does want now?

  Hi all

  Flash Pro CC 2014 (v 14.0.0.110) is now available for download through the creative application of cloud.

  We have included a whole new motion editor and several other new features with this release of Flash Pro. The new query editor is completely redesigned, intuitive and easy to use while retaining the basic features and backward compatibility with Flash CS6

  To call the query editor, just double-click on your motion tweens on the timeline (or right click and select "Refine the Motion") and the motion Editor opens in the context of the scenario itself. Double click again to collapse once you have made your adjustments.

  Complete list of the new features of Flash Pro CC 2014 is available at these links:

  Overview: https://www.adobe.com/in/products/flash.html

  What's new: https://helpx.adobe.com/flash/using/whats-new.html

  Release notes: https://helpx.adobe.com/flash/release-note/flash-professional-cc-2014.html

  Videos: https://helpx.adobe.com/in/flash.html

  Thank you

  Mabrouk

• My Toshiba T110 has a keylock at the left rear. How is it supposed to work?

  Toshiba security lock,

  My Toshiba T110 has a keylock at the left rear. How is it supposed to work?

  Check with Toshiba support or the manual that came with your computer.

• I think that I have been scammed by the company supposed to work for windows saying that my computer was about to crash

  A company called vap technology called me last night on my phone at home and said to my computer was about to crash. they were Indian speaking people and said they were working for microsoft support; as I am not a laptop user profficent of long date, I couldn't tell if they were or not. How to get back money from $149, I paid them to fix the problems and how to uninstall the programs they put on my laptop; also what can I use to tell if it's a microsoft technology? Help!

  It is a scam. See:

  http://www.microsoft.com/security/online-privacy/avoid-phone-scams.aspx .

  If they have access to your PC, they can install any number of malicious programs. My recommendation is to do a clean reinstall of Windows - it's the only way to be sure that your system is clean.

  If you have them paid by credit card, tell your card provider immediately what has happenend.

  All the data on your computer (passwords, credit card numbers, numbers of account documents, etc.) may have been compromised (they may not know now). According to the companies concerned (for example your bank) what happened.

  Use another PC to change passwords.

  Consider telling your local police.

• EAC Package created with the ability to update. However, when an update to a CC for 2014 is available, it requires only an Adobe ID connected with the deployment of the company? This is how it is supposed to work?

  I created a company package CC with the ability for an administrator to perform updates. However, when an update is available for a CC 2014 application, an Adobe ID is asked to download and install the update and the Adobe ID must have the correct rights and permissions to perform the download if it means that it must be an account with our company related to the CC Adobe license?

  I studied and the way it looks, it's another package will have to be downloaded to get CC 2014 applications. The undesirable method would be to share the Adobe ID or plug the Adobe ID and do the installation myself (the Adobe ID that our institution is connected to our Creative Enterprise Cloud license which we give out). I agree this isn't the ideal method, especially for the company, the Mac Admin had just completed an installation of 80 iMac of the old package last month. You hope that the Adobe engineers would come up with something better.

• USB-6210 on Linux - is DAQmxBaseExportSignal supposed to work for this unit?

  I have two devices USB-6210 I need to synchronize so that they
  both collect data exactly at the same time. I want to trigger data
  collection for each device by sending a trigger off Dev1/PFI6 and
  have two devices to receive the signal on PFI0.

  The input analog trigger doesn't seem to work, but the input digital trigger seems to be accepted. Unfortunately, I can't get the clock signal to export.

  Here is the sample program that I use:

  /*********************************************************************
  *
  * ANSI C program example:
  *    contAcquire-ExtClk - DigStart.c
  *
  * Example category:
  *    HAVE
  *
  * Description:
  *    This example shows how to acquire a continuous quantity
  *    the data using an external sample clock, launched by a numerical advantage.
  *
  * Execution mode:
  *    1. Select the physical channel is the place where your
  *       a signal came on the DAQ hardware.
  *    2. Enter ranges of minimum and maximum voltage.
  *    Note: for best accuracy try to match ranges of entry of the
  *          waits the voltage level of the measured signal.
  *    3. Select a sample clock source.
  *    4. Set the approximate rate of the external clock. This allows to
  *       the internal features of the acquisition to be like
  *       effective as possible. Read also assign samples.
  *    5. Select a source for the beginning of digital edge trigger.
  *    6. Select the edge, rising or falling, to trigger.
  *
  * As follows:
  *    1. Create a task.
  *    2. Creating an analog voltage input channel.
  *    3. Set the parameters for an external clock Source.
  *       In addition, set the sampling mode to be continuous. The
  *       external clock frequency is given to allow internal
  *       characteristics of the acquisition to be as effective as
  *       possible.
  *    4. Set the parameters of a beginning of digital edge trigger.
  *    5. Call the start feature to start the acquisition.
  *    6. Read data from waveform looping up to 10 seconds or a
  *       error occurs.
  *    7. Call the function in the task to clear to clear the task.
  *    8. Display an error, as appropriate.
  *
  * Overview of e/s connections:
  *    Make sure that your input of the signal Terminal corresponds to the physical
  *    Control I/o channels. Also, make sure that your digital results in the application
  *    signal is connected to the terminal that is specified in the command Source.
  *
  * Recommended use:
  *    1. Configure and start calling features.
  *    2. Call loop function.
  *    3. Call Stop function at the end.
  *
  *********************************************************************/
  
  #include "NIDAQmxBase.h".
  
  
  
  #define DAQmxErrChk (functionCall) {if (DAQmxFailed (error = (functionCall))) {goto error ;}}
  int main (void)
  {
      Task settings
      Int32       = 0 error;
      TaskHandle  AITaskHandle = 0;
      tank        errBuff [2048] = {'\0'};
      Int32       i;
      time_t      startTime;
  Channel settings
      char        [] = "Dev1/ai0" chan
      float64     min = - 10.0;
      float64     max = 10.0;
  Sync settings
      char        [] = clockIn ' / Dev1/PFI0 ";
      char        [clockOut] = ' / PFI4/Dev1;
      uInt64      samplesPerChan = 1000;
      float64     sampleRate = 10000.0;
  Trip parameters
      char        [] = triggerIn "/ Dev1/PFI2";
      char        [triggerOut] = ' / PFI6/Dev1;
      uInt32      = DAQmx_Val_RisingSlope triggerSlope;
      uInt32      = 100 triggerSamples;
  The data read settings
      #define     bufferSize (uInt32) 1000
      float64     data [bufferSize];
      Int32       pointsToRead = bufferSize;
      Int32       pointsRead;
      float64     timeout = 10.0;
      Int32       = 0 totalRead;
  printf ("calling CreateTask - HAVE... \n");
      DAQmxErrChk (DAQmxBaseCreateTask("",&AITaskHandle));
  printf ("calling CreateAIVoltage - HAVE... \n");

  
  DAQmxErrChk (DAQmxBaseCreateAIVoltageChan(AITaskHandle,chan,"",DAQmx_Val_Cfg_Default,min,max,DAQmx_Val_Volts,));
  printf ("calling CfgSampleClkTiming - HAVE... \n");
  DAQmxErrChk (DAQmxBaseCfgSampClkTiming (AITaskHandle, clockIn, sampleRate, DAQmx_Val_Rising, DAQmx_Val_ContSamps, 1000));
  printf ("calling CfgSampleClkTiming - HAVE... \n");
  DAQmxErrChk (DAQmxBaseCfgSampClkTiming (AITaskHandle, "OnboardClock", sampleRate, DAQmx_Val_Rising, DAQmx_Val_ContSamps, 1000));
  printf ("calling DigEdgeStartTrig...\n");
  DAQmxErrChk (DAQmxBaseCfgDigEdgeStartTrig (AITaskHandle, triggerIn, triggerSlope));
  printf ("calling ExportSignal - sample on %s...\n clock", clockOut);
  DAQmxErrChk (DAQmxBaseExportSignal (AITaskHandle, DAQmx_Val_SampleClock, clockOut));
  printf ("calling StartTask - AI\n");
  DAQmxErrChk (DAQmxBaseStartTask (AITaskHandle));

  The loop will leave after 10 seconds

  startTime = time (NULL);
  While (time (NULL)
  printf ("loop - calling ExportSignal - Trigger...\n");
  DAQmxErrChk (DAQmxBaseExportSignal (AITaskHandle, DAQmx_Val_StartTrigger, triggerOut));
  printf ("loop - call ReadAnalogF64...\n");
  DAQmxErrChk (DAQmxBaseReadAnalogF64(AITaskHandle,pointsToRead,timeout,DAQmx_Val_GroupByChannel,data,bufferSize,&pointsRead,));
  totalRead += pointsRead;
  printf ("acquired %d samples. %D total \n",pointsRead,totalRead);
  Print only the first 10 points of the last data read
  for (i = 0; i< 10;="">
  printf ("data [%d] = %f\n", i, data [i] ");

  }
  printf ("%d \nAcquired total samples.") "\n", totalRead);

  Error:
  If (DAQmxFailed (error))
  DAQmxBaseGetExtendedErrorInfo (errBuff, 2048);
  If (AITaskHandle! = 0) {}
  DAQmxBaseStopTask (AITaskHandle);
  DAQmxBaseClearTask (AITaskHandle);
  }
  If (DAQmxFailed (error))
  printf ("Error in DAQmxBase % d: %s\n", error, errBuff);
  return 0;
  }
  

  And here is the result of the execution of the example program.

  $. / contAcquire-ExtClk-DigStart
  the CreateTask call - HAVE...
  call CreateAIVoltage - HAVE...
  call CfgSampleClkTiming - HAVE...
  call for DigEdgeStartTrig...
  Calling ExportSignal - sample on/Dev1/PFI4 clock...
  DAQmxBase error-200428: value passed to the control task/channels is not valid.

  Someone can tell me what I am doing wrong or is ExportSignal not supported for devices USB-6210 on Linux?

  Thank you

  -Tom

  Hey Tom,

  Thanks for the update, I should have tested my suggestion before posting but I had no useful material at a time.  It turns out that, DAQmx Base supports not the outputs of the internal sample clock routing counter HAVE.

  Workaround will be physically wiring the meter output terminal (default is 4 PFI for counter 0, PFI 5 to 1 meter) until one of the PFI input lines (PFI 0:3) and use the PFI input as SOURCE for your sample clock (for example "/ Dev1/PFI0").

  Best regards

• USB-6210 on Linux - is DAQmxBaseCfgAnlgEdgeStartTrig supposed to work for this unit?

  I have two devices USB-6210 I need to synchronize so that they both collect data exactly at the same time. I want to trigger the data collected for each device by sending a trigger off Dev1/PFI6 and have two devices to receive the signal on PFI0.

  I "ve tried using the example AI program that receives a left analog trigger, and it doesn't seem to work. Here is the code I tried:

  /*********************************************************************** ANSI C Example program:*    acquireNScans-AnlgStart.c** Example Category:*    AI** Description:*    This example demonstrates how to acquire a finite amount of data*    using the DAQ device's internal clock, started by an analog edge*    condition.** Instructions for Running:*    1. Select the physical channel to correspond to where your*       signal is input on the DAQ device.*    2. Enter the minimum and maximum voltage range.*    Note: For better accuracy try to match the input range to the*          expected voltage level of the measured signal.*    3. Set the number of samples to acquire per channel.*    4. Set the rate of the acquisiton.*    Note: The rate should be AT LEAST twice as fast as the maximum*          frequency component of the signal being acquired.*    5. Set the source of the start trigger. By default this is*       analog input channel 0.*    6. Set the slope and level of desired analog edge condition.** Steps:*    1. Create a task.*    2. Create an analog input voltage channel.*    3. Set the rate for the sample clock. Additionally, define the*       sample mode to be finite.*    4. Define the parameters for an Analog Slope Start Trigger.*    5. Call the Start function to start the acquistion.*    6. Read all of the waveform data.*    7. Call the Clear Task function to stop the acquistion.*    8. Display an error if any.** I/O Connections Overview:*    Make sure your signal input terminal matches the Physical*    Channel I/O Control. In this case wire your signal to the ai0*    pin on your DAQ Device. The analog start trigger must be connected*    to PFI0.** Recommended Use:*    1. Call Configure and Start functions.*    2. Call Read function.*    3. Call Stop function at the end.**********************************************************************/
  
  #include "NIDAQmxBase.h"#include 
  
  #define DAQmxErrChk(functionCall) { if( DAQmxFailed(error=(functionCall)) ) { goto Error; } }
  
  int main(int argc, char *argv[]){    // Task parameters    int32       error = 0;    TaskHandle  taskHandle = 0;    char        errBuff[2048]={'\0'};    int32       i;
  
      // Channel parameters    char        chan[] = "Dev1/ai0";    float64     min = -10.0;    float64     max = 10.0;
  
      // Timing parameters    char        clockSource[] = "OnboardClock";    uInt64      samplesPerChan = 1000;    float64     sampleRate = 10000.0;
  
      // Triggering parameters    //orig    char        triggerSource[] = "PFI0";    char        triggerSource[] = "/Dev1/PFI0";    uInt32      triggerSlope = DAQmx_Val_RisingSlope;    float64     triggerLevel = 1.0;
  
      // Data read parameters    #define     bufferSize (uInt32)1000    float64     data[bufferSize];    int32       pointsToRead = bufferSize;    int32       pointsRead;    float64     timeout = 10.0;
  
      DAQmxErrChk (DAQmxBaseCreateTask("",&taskHandle));    DAQmxErrChk (DAQmxBaseCreateAIVoltageChan(taskHandle,chan,"",DAQmx_Val_Cfg_Default,min,max,DAQmx_Val_Volts,NULL));    DAQmxErrChk (DAQmxBaseCfgSampClkTiming(taskHandle,clockSource,sampleRate,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,samplesPerChan));        printf("Calling CfgAnlgEdgeStartTrig with %s...\n", triggerSource);    DAQmxErrChk (DAQmxBaseCfgAnlgEdgeStartTrig(taskHandle,triggerSource,triggerSlope,triggerLevel));    printf("Done with StartTrig.\n");    DAQmxErrChk (DAQmxBaseStartTask(taskHandle));    DAQmxErrChk (DAQmxBaseReadAnalogF64(taskHandle,pointsToRead,timeout,DAQmx_Val_GroupByChannel,data,bufferSize,&pointsRead,NULL));
  
      printf ("Acquired %d samples\n", pointsRead);
  
      // Just print out the first 10 points    for (i = 0; i < 10; ++i)        printf ("data[%d] = %f\n", i, data[i]);
  
  Error:    if( DAQmxFailed(error) )        DAQmxBaseGetExtendedErrorInfo(errBuff,2048);    if(taskHandle != 0) {        DAQmxBaseStopTask (taskHandle);        DAQmxBaseClearTask (taskHandle);    }    if( DAQmxFailed(error) )        printf ("DAQmxBase Error %d: %s\n", error, errBuff);    return 0;}
  

  and here is the result of the execution of the program:

  $. / acquireNScans-AnlgStart
  Calling CfgAnlgEdgeStartTrig with/Dev1/PFI0...
  DAQmxBase error-200428: value passed to the control task/channels is not valid.

  The file README.txt NIDAQ-mx says this is taken in charge for USB-621 X. Can someone tell me why it does not work?

  Tom,

  Analog start and trigger reference are supported only on the PXI, PCI, and the NOR-6210 PCIe form factors.  The Readme file has a list of the functions that are available for USB.

  Kind regards

  Justin

• How can I run first 6.0 (year 2000) on Windows 8? Change the compatibility settings/admin make no difference. No XP Mode in W8 or the other. How Wow64 is supposed to work?

  I struggle with this, I searched for hours and I can't find a solution on a forum or a thread. I read that the 64-bit Windows versions have Wow64 - but how does it work? And I read a little on VIrtual PC, but it's too complicated. Help, please!

  Even if you had Windows XP Mode, you would not be able to use Adobe Premiere 6.0 in it since graphical applications such as first would not be supported.

  The premier 6.0 is quite an old version. I sincerely recommend that you invest in a modern version of Adobe Premiere such as Adobe first CC or Adobe Premiere Elements.

  You can look into alternatives include Windows Live Movie Maker.

• How is form of Active Directory - supposed to work

  I have configured the Active Directory User Management connector and it seems to work very well.  I have a question about pre fill for the shape and the way it is supposed to work.

  So when I add the AD application to a cart for a user and proceed to the checkout, the form is empty.  If I submit the form, I see that data get populated in some areas namely, first, last, organization...  My question is, which is how it is supposed to work?  Usually blank form or can do us so that when you go to the cashier, you see the pre-filled fields?

  Thank you!

  Form that is displayed after the opting out is "Instance of form." To fill the values on this form, that you must write prepopulate the plugins.

• When I download brushs for Photoshop CC, they prove to be nothing to see how it is supposed to be. What is a frame with Photoshop or my computer?

  I tried to download the Brushs recently: My Pack of Brush by DanLuVisiArt on DeviantArt

  I'm still relatively new to Photoshop, so forgive me if there is an obvious solution to this, but whenever I have to download the Brushs, they turn out nothing like that in the way that it shows. Instead, they resemble default brushes. The picture below on the left is the result after downloading rather than how it is supposed to be in the right image. I would appreciate help, no matter how big or small.

  Thanks in advance.

  

  https://forums.Adobe.com/docs/doc-7273 Welcome to the Adobe Community Connections page!

  This page is where you can connect with your peers in a virtual coffee international fair for conversations that relate directly to the support and help of the product

  [Ask in the correct forum allows... Left the connections for specific program forum forum... MOD]

  Deviant Art preview shows how the brushes look when used with a sensitive pressure, like a Wacom tablet.  You will see the preview as well as yours, if only by using a mouse or a tablet on which the pressure sensitivity was not working.

• How can I make the individual work for each song on a compilation album of show when I browse my playlists?

  I get a lot of my music from Soundcloud where individual songs are released by artists often with none of the albums.

  So, when you add these songs on iTunes I the name of the album for each of them SoundCloud despite the fact that each of them have different names track/artists/works of art.  When I select the option to indicate that the song is part of a compilation album, even if the individual work remains in each song and shows when I play the song, looking at my playlists, songs from my compilation album of SoundCloud will only show album art compilation rather than the individual works for each song.  How can I my iTunes will show that each individual work?

  You can't while retaining spacing as part of this same album. If you want each art individual to show then tracks them to a unique combination of the album title and album artist. If the tracks are underway on an older iPod then the tracks on the album must be unique.

  TT2

• I bought the live app pga golf, but it doesn't work in my country! How can I cancel the payment for the next month?

  I bought the live app pga golf, but it doesn't work in my country! How can I cancel the payment for the next month?

  There are instructions on this page to manage and stop automatic renewal of subscriptions: view, change or cancel your subscription - Apple Support

• Just under the toolbar, Firefox tells me "TΘlΘcharge the latest applications"-what is and how can I stop it. It worked for 2 hours.

  Just below the toolbar, Firefox tells me "download the latest applications"-what is and how can I stop it. It worked for 2 hours.

  This has happened

  Each time Firefox opened

  == I opened Firefox "Add-ons" window

  Disable or uninstall the toolbar MSN/Bing.
  See this thread and disable or remove modules.

• How to make a disk image of work for my windows 98se boot (original is long dead)

  How to make a disk image of work for my windows 98se boot (original is long dead).  I have a copy of Windows 98SE bought new off the years of the plateau.  I now have a 64-bit system, so I can't run it natively, but I discovered that I can't even run at all, because I don't have a working bootable floppy!  I thought that the CD is bootable, when I used it a long time ago, but now it does not start if I have used the disk? Anyway, can I get a driver Microsoft w/CD install/bootable disk, or do I have another decent resource?

  Thank you. You can contact me to the * address email is removed from the privacy *.

  http://www.bootdisk.com/bootdisk.htm

• spell check does not work for dreamweaver Uppercases how can I get it back?

  spell check does not work for dreamweaver Uppercases how can I get it back?

  Hello

  Dreamweaver is an Adobe product. I suggest you to contact Adobe support for assistance. Please post your query in the Adobe forums.
  Dreamweaver

  http://forums.Adobe.com/community/Dreamweaver