How backup F20-136 disks, I need to clean OS install?

Similar Questions

• Clean install of Windows XP Home Edition. How will I know if I need any driver to install?

  I recently installed Windows XP Home Edition on my PC and I don't know if I'm away from all the drivers. Everything SEEMS to work fine, but I just want to know if I do any driver installs.

  Right mouse on my computer, properties, select hardware then click on Device Manager look here on the devices if you see point exclamation or question marks on one of them or more, then you should correct the error by installing the correct driver for these devices, and if you don't see anything. Then, everything is ok with you.

• New Windows 7 laptop (dv7) need to clean windows install

  How can I clean install windows (without the preloaded software) on my new computer laptop.  It does not resemble the laptop came with windows discs.

  I have already created recovery disks, but they will reinstall the State of purchase, do not clean state.

  Thank you!

  ERDS says:

  ERDS says:

  How can I clean install windows (without the preloaded software) on my new computer laptop.  It does not resemble the laptop came with windows discs.

  I have already created recovery disks, but they will reinstall the State of purchase, do not clean state.

  Thank you!

  Anyone know how I can get my hands on a Windows 7 Home Premium OEM disc to perform a clean installation?

  I found myself having to buy an upgrade to Windows Ultimate Best Buy to get the disks.  Ouch!

• Need TV antenna for my F20-136

  I tried to find an entenna for my F20-136, so I can watch TV when out and about on trips etc.

  The recommended to me when I bought the laptop was this one:

  http://www.scan.co.uk/products/productinfo.asp?WebProductID=243628

  Trouble with that is that I don't need the tuner, as it is built, or the software or the remote control. So is just an antenna on its own that can anyone recommend?

  Don't want to buy the one above and then just lost it cause I don't need!

  See you soon

  Milouze

  Hello milouze

  Unfortunately I didn't find a better solution. I really put t believe you will find a lot of different antennas. Why you n t test it. You can send it if you are not satisfied.

  If you buy one please let us know how it works. I have Satellite P20 with TV tuner and perhaps it will also be interesting for me.

  Good bye

• How to watch movies on my TV via Qosmio F20-136?

  How can I the F20-136 by using the windows media Center to watch and listen to movies on my TV?

  It is very easy. Everything is explained in s operating manuals. You must use a video cable and connect your laptop to the TV. Using TV button you can switch to the TV only. Select the right channel of the TV and when you see the office here, you can start WinDVD player and watch movies.

  If you use the S-video cable, it is important to say that this cable can transfer the video signal only and if you want to get sound on TV you also need audio cable.

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18877

  Here you can see how Miro connected his notebook to the TV (sound).

  If you have any other questions write again.

  Good bye

• Qosmio F20-136: someone known takes how long to repair?

  Hi, I sent my Qosmio F20 136 for a minor
  the envelope under warranty repair. Anyone
  know how long repairs take before you get the item back?

  Thank you
  Mike

  It is not easy to say. This repair may depend on many factors.
  (country, spare parts, delivery time, etc...)
  But generally, you can ask guys ASP in your country for the Info

• Qosmio F20-136: how to install the software update for DVB TV device?

  Hi, I used the update all the drivers for my qosmio f20 136 11/07/06 and received various pilot updated on the list.
  The file called TV-TUNER-QF20-XPMCE-103250526 at startup allows the pilot to TV TUNER directory listing and seems to be once I was the driver under System section and selected update driver and select this directory.

  My question is the another file called DVBTAHYB-QF20-XPMCE-1051340 when I click on the file that I just get a list of files, when I try the My TV driver update and choose this directory it won't find anything, does anyone know how to install that to update the file. The download list says they are two updates of tv pilot.

  Maybe Toshiba could include a text file explaining in detail how to install these files? Can anyone help please. And nobody knows which file to copy to save a permanent channel registration, so I could re install the file in the directory so lost the complete channel list?

  Thanks in advance.

  Hello

  Maybe I understood something wrong, but according to the prudence shown on the Toshiba download page, the TV-TUNER-QF20-XPMCE-103250526 driver is designed for the range of models between F20-101 and F20 - 135.
  Are you sure that this disc is designed for your computer model laptop too?

  Have you tried to install the update of dvbtahyb-qf20-xpmce-1051340 when the original pilot of the TV (factory settings) is preinstalled?

• Qosmio F20-136: TV Tuner recording HARD disk

  I have the Qosmio F20-136 with the digital TV Tuner.

  When I record a TV for about 30mins long, it takes a lot of space of hard disk even when am low quality recording. I use Windows MCE to record.

  Y at - it another way to save that uses less hard drive space not having to change later to reduce the space?

  Hello

  I put t think you can do much. Check it please this page http://www.microsoft.com/windowsxp/mediacenter/using/guide/recordset.mspx

  Good bye

• Qosmio F20-136: how to check the temperature of the CPU?

  someone knows how can I check what temperature turns or a program that will tell me and also is it possible to adjust fan settings?

  I have a Qosmio F20-136

  Hello

  You can find in the management tool of power under the method of cooling setting of the cooling fan.
  Try to set it to the lower level. I know that cooling fan is sometimes too loud, but you must know that you have high technology with powerful hardware components unit. Material is placed on the square and must be properly cooled to avoid damage.

  I really put t whether a tool can show you the temperature of the CPU. Check in the advanced search if you can find a similar topic. Long ago, I read the discussion on this subject.

  Good bye

• How can I restore my system XP to factory settings with on a boot disk? System Restore won't let me back to a date. I need to clean and start over with on a XP boot disk.

  How can I restore my system XP to factory settings with on a boot disk? System Restore won't let me back to a date. I need to clean and start over with on a XP boot disk.

  You will need to go on the manufacturer of your pc and then ask for a windows xp disk and drivers. This will give you a new copy, but not out of the box state. For an out of the box, get a recovery disk. Just answer what you want.

• How to recover my product key of windows 8, I installed the windows 10 techniques view without taking backup I need to go back to my windows 8 pls someone help

  How to recover my product key of windows 8, I installed the windows 10 techniques view without taking backup I need to go back to my windows 8 pls someone help

  Hi Carmen,.

  Thanks for posting your query in Microsoft Community Forum.

  I understand that you had not taken any prior backup upgrade to Windows 10 Technical Preview and need product key to retrieve Windows 8.

  So, first of all, I suggest you to check the product key in email messages when you purchased the license to the product for Windows 8. Once you get the product key, you can create a Windows 8 ISO and reinstall using this product key. See the following article:

  To create installation media Windows 8.1

  However, if you had bought the system pre-installed with Windows 8. Then, you may need to contact the Original Equipment Manufacturer (OEM) system for Windows 8 discs to restore the older operating system.

  Hope this information is useful. Let us know the results for further assistance, we will be happy to help you.

• Qosmio F20-136 - Question about installing Linux in virtualization

  I have Windows XP MCE 2005, Ubuntu 8.10 & openSUSE 11.0 on my laptop F20-136 (triple boot).

  I intend to:

  0 save the partition Windows XP MCE 2005
  1. remove all the.
  2. install openSUSE w / Xen Virtualization.
  3. then create virtual machines to run backup Windows XP MCE 2005, new 8.10 of Ubuntu and other linux distributions.

  The questions are:
  1 F20-136 requires Windows XP MCE 2005 as its main operating system?
  I ask this question because I noticed that when I disable the builtin speakers in XP, I can't turn them on when I boot in openSUSE.
  So it seems to me that XP with Toshiba drivers and other software on Toshiba system has complete control over the material.

  2. will it affect Qosmio player?

  3. is there any other software virtualization is better than openSUSE w / virtualization Xen?
  I know MS Virtual PC, VMWare, VirtualBox.

  Please note that probably I don't want Windows XP MCE 2005 + virtualization (which will be my last option). I would like to have virtualization using Linux, openSUSE preference as he impressed me with his ability to (fast start/stop<= 45="">

  After further investigation, I think of virtualization VirtualBox which offers a bare metal solution, i.e. without operating system host is necessary.

  VitualBox (hypervisor) layer can be installed directly on the hardware, and then the virtual machines can be created for different operating systems.

  In this spirit, I have queries:

  Say I back up the entire hard drive (just in case the plan everything is the draw, I would restore the image of the entire hard drive), delete the contents of the entire disk, install VirtuaBox.

  1. let Qosmio player as well, which by my understanding, is 10 GB of free space somewhere on the hard drive?

  2. I would be able to install XP MCE recovery disk to create a virtual machine?

  Thank you
  Amol

• Several VSS writers fail and my backups are failling too. Need help!

  Several VSS writers fail and my backups are failling too. Need help:

  I have a desltop installed SP3 x 64 XP and a laptop with seven x 64 SP1. In both the machine that my backups fail. I'm trying to back up data by using boats to storage, backup Windows also is failling. I'm taking a full backup on a USB external drive (2 TB).

  I did "vssadmin list writers" and showing several writers are in the failed State.

  I've done SFC/scannow, it did not help. There is no error in the disk and Chkdsk.

  I don't know how VSS works and how to solve the problem. Help, please!

  A lot of people told me they found this informative article. That's why I upgraded that and display back again.

  -------------------------------------------------------

  Before you stat is working on this issue make sure that the volumes have no system disk/file error. Run Chkdsk and ensure.

  (1) in the case of a failure of backup/writer, we first check the drivers associated with the VSS backup.

  These drivers are:

  VOLSNAP. SYS

  NTFS. SYS

  SWPRV. DLL

  -Check the version of above mentioned MS 3 files and update using MS Hotfix.

  If we have installed other suppliers, who might be the supplier of StorageCraft, Symantec suppliers and suppliers of Acronis, he must ensure that their files are also updated.

  Note: You can see the list of suppliers using this command: VSSADMIN LIST PROVIDERS

  Some of the DRIVERS PROVIDER commonly find are:

  stcvsm.sys

  symsnap.sys

  snapman.sys

  (2) this step is performed only when we find him

  VSS writers in a failed State. If we find the stable writers and backups still fail, or we get errors, do not perform this step if you please.

  In this case, the VSS writers fail, we can delete the following registry key, after of course saving and restart the server.

  HKLM/Software/Microsoft/EventSystem/{26c.../Subscriptions.

  This key will be automatically recreated when you restart and writers should return to the stable state.

  The writers pending the completion status is not a problem. It's also good that Stable.

  We can do on the Server 2003, 2008 and 2008 R2 OS as well.

  However, in Windows Server 2003, after you delete and restart the "vssadmin list writers" server cannot display all the writers, in this case must register the dll:

  For a list of the dll files to register, please check KB: http://support.microsoft.com/kb/940184

  Note: The reinstatement of dll in Windows Vista/2008 and especially is NOT recommended.

  (3) if we have only one / specificwriter (s) in a State of failure, which would always be SQL, EXchange, IIS or NTDS, then we have need to revive their respective service Console of service.

  If they fail repeatedly, then make sure that the application and its components are updated. See their respective engineers immediately. Make sure that the latest service packs and patches are installed.

  (4) make the foregoing, resolves generally 80 to 90% of the questions. If we believe that the issue is occurring, or we have VSS event errors, it may be the providers, the origin of the problem. If the creation of the snapshot does not properly, it can affect writers and other components involved.

  Please check providers using "vssadmin list providers. If we find any other provider, other than the Microsoft software shadow copy provider, we have to remove from the list.

  To do this: start the registry editor.

  HKLM/System/CurrentControlSet/Services/VSS/suppliers/GUID.

  One GUID would be for Microsoft Software Shadow Copy provider. The other GUID would be for other providers such as StorageCraft. We will save the GUID, and then delete it. Then restart the machine.

  Now when we do vssadmin list providers, we will see only the default Microsoft provider.

  I have seen in many cases where our supplier of StorageCraft may not work properly and continue of not not the authors. In such

  case, if we get rid of the supplier, then the issue is resolved and not re occurs.

  -However this would impede the functionality of StoaregCraft or any other similar to this backup software.

  That's why to engage respective software tech support for further assistance.

  (5) If a shadow copy is enabled on the volume, make sure that the storage area is set to the default location.

  For example:

  If we take a snapshot of C: then the storage area should be C:

  We are changing that, if we do not have enough free space (at least 300 MB) free.

  We can click with the right button on the volume, goto the cliché tab and change it accordingly.

  Also note that the minimum value of the storage area should be 300 MB and maximum can be 3000 MB.

  We can also set any value between the two, which is a multiple of 300, 600, 900, 1200, 1500 etc... According to the available space.

  In the cases where errors in the event viewer on wait times (event id: 12298, 12310, 2004, 12290) then we also need to put the MinDiffArea in the registry.

  HKLM/System/CurrentControlSet/Services/Volsnap

  Right side, new DWORD VALUE - "MinDiffAreaFileSize" - change and set the value between "300-3000 Mo" or any multiple

  300 between the two. Ideally, we can define it on 3000 MB which works even better if we have space.

  Ref: http://support.microsoft.com/kb/826936

  (6) also, please make sure we have plenty of free space. If we go by the book, a snapshot requires at least 10% of the volume

  to be free.

  Storage controllers (SCSI/RAID controllers) could also be a problem and may need to be updated.

• How to create a disk Image in Windows 8

  I want to do something real Basic.  I think I know how, but the confirmation of the need.  I want a disk Image full of my hard drives so that if my hard next week C drive crashes I can quickly return to normal (normal, the way which was when I made the image).  I do not view the files in the Image or anything else.  I just want to avoid the week it would completely re - install everything.  With regard to data (not the files system etc, but my personal data), I have another solution for this.  I think that the option of recovering files in Windows 7 in Windows 8 will do what I want in what concerns the creation of an image, but I want to be sure.  I think everything I do is as follows:
  In Windows 7 File Recovery select "create a System Image" and the backup on external media.  I think I also need to create a System Image repair disc.  Once this is done, if my C disk fails tomorrow I think that all I have to do, is as follows:
  Put the recovery disk in my hard drive.  Start the computer to the reader and follow the instructions to copy the stuff on my external hard drive through my C drive.
  Is the above, real or not?

  You guessed it... The system image is an image of the reserved system & windows partitions.

  With any Microsoft windows 8 install or update of the same bits of DVD or the same bits win8 system repair disc, put on cd, dvd or USB stick bootable... you can use it to boot from and there are simply in your sysem image and any hard drive of equal or greater size.    Will probably work.  Can never say for sure 100%.    its good to have a 2nd source of images and program to run it.  EaseUS ToDo Macrium or something.    Reads the command RecImg & what he does.

• Qosmio F20-136: I have no restore CD?

  The Qosmio F20-136 laptop comes with a Windows CD I can't find one, don't know if its just on the recovery CD, but I think remember me there used to be a Microsoft Map with etc product key, I do not see to be able to find a.
  Thank you

  Hi Mike

  AFAIK the recovery CD provided with the device. On this CD, you will find a ghost image that includes a Windows operating system, drivers, and other applications as a Note.
  The product key for a Note that you will find on the cover of the recovery CD. In addition, you don't need to activate the Windows operating system because the imgages Toshiba are already activated.

  But maybe you have to create this image of yourself. In this case using Toshiba, you will find a function to burn clean recovery Image

  Good bye