Satellite A100-646 and external monitor shows black screen

Similar Questions

• Satellite U300-113 and external monitor use

  I have, what I thought until very recently, a very simple need: I would like to connect an external monitor on my laptop, but on the continuation of the investigation things seem much more complicated about resolutions natives and elongation.
  Is there anyone who could recommend an acceptable quality monitor that is proven to work?

  I think that you should check the resolutions supported for external monitors and I think you can find answer in user manual s on page 119. To have a perfect image on external screen, you should buy external display with a native resolution listed in the table of user s manuals.

  Also talk to your local dealer. Perhaps you can test the functionality in the store before buy you.

• Re: Satellite A100-011 does not start, a black screen at the beginning

  I have a Toshiba Satellite A100-011, which is almost 5-6 years. It suddenly started to behave abnormal.

  First of all, I started to get a 1-2 sec black screen when he was running. The screen was on and off occasionally.

  After a few days, I could not started upward from my windows xp sp3 operating system. I tried to start in safe mode with networking to see if I had a few spy, virus or something. I ran avast, hijact, ad-aware and some more, but not found anything.

  Later, I tried to format my laptop with a xp professional, but this time I can't see any reflection that passes more fun running and a black screen. I just got a black screen at the beginning and it does not start.

  I plugged on a television screen, and here I have started. I have re-installed all the drivers and formatted, but all I get is a black screen on my laptop at the beginning.

  What should I do now? Do you think I have a problem with my screen of HW or a driver problem with nvidia geforce go 7600? Maybe I'm missing something?

  Thanks in advance for all replies.

  If you can see the picture on the TV there are a few s laptop display problem. Y at - it some problem connection or display itself.

  You want to fix it yourself? You can disassemble the laptop?
  I mean if you have any experience with this kind of things that you should seek professional help.

• Beginning of screen satellite A100-646 is that if I press Fn and F5

  I am the owner of a satellite * A100-646 * and every time I turn on I have to press several times on * Fn + F5 * for the screen to open but it loads windows vista all ok.

  Sometimes, the screen goes black 2 or 3 times but only sometimes.

  Someone at - it an ideea about how to solve this problem? anyone had similar problems

  This could be the beginning of the end for the my toshiba graphix good?

  TYVM. OPERATING SYSTEM

  Hello

  Switches of combination between the internal display and the external video output of keys FN + F5.
  So if you want by pressing the FN + F5 buttons, you can switch to external monitor, TV, or monitor external and internal display.

  In my opinion you should first update the display driver after the laptop has loaded the Vista.
  In addition, go to BIOS and set it to the default settings as well.

  Check also if the external monitor has not been defined as a main display...

  Last but not least, you could try to reinstall the whole OS in order to check if the problem still persists

  Welcome them

• Dynadock and Satellite Pro U400-135 - external monitor question

  Hello.
  We have a serious problem on the 26 dynadock vga e Satellite Pro U400-135 unit

  The problem is:
  If set to host as a single external monitor during startup frequent windows loses resolution external monitor.

  Example of resolution monitor post seting like 1280 x 1024, start with connected dyndaock, frequent resolution 1280 x 800 not correct and external monitor image not correct.

  Operating system is Vista 32 bit, driver dynadock is 2.3 update and dynadock displaylink displaylink site 4.6.16208 site.
  Same problem with Windows Xp 32 bit.

  How can I solve the problem?

  Hello

  If I understand the first message, external monitor resolution automatically goes to 1280 x 800 even if you set it to 1280 x 1024.
  I guess that your external monitor is connected to the dynadock.
  Is this good?

  AFAIK, you can customize the video settings of the dynodock.
  It provides a video output in two modes: Mode and extended Mode of mirror.

  Mirror mode creates an identical display of your computer to the external monitor screen. In mirror Mode, the dynadock automatically selects the settings (screen resolution, color quality and discount rates) for the external monitor that will allow the best resolution based on your computer's settings.

  Maybe you use the mirror mode and therefore the dynadock the resolution automatically because it of the best for the external monitor.

  I recommend checking the Dynadock manual for more details.
  There are two modes are described there.

  Welcome them

• Satellite A300-237 - what external monitor?

  Hello

  I would buy an external LCD 19 "monitor for my Toshiba Satellite A300-237. Which is better: 4:3 / 16:9 / 16:10 / 5:4?

  Thank you

  Hello

  What image format you prefer?
  You should buy a monitor with your favorite image format.

  Generally speaking all the works according to the user manual and external monitor, your laptop supports up to 2048 horizontal and 1536 vertical pixels up to 16 m of colors on the external monitor.

• Question on the second hard disk on the Satellite A100-646?

  Hi all

  is it possible to install a second hard drive on laptop (I have a satellite A100-646)?
  There is a solution like optbay for computer toshiba laptop?

  Thank you very much
  Best regards
  Fabrizio

  I agree with the above use the A100 cannot be upgraded with a second HDD

  I also recommend buying external USB2 HARD drive

• Satellite A100-233 and 500 GB HARD drive

  HI, I need help. I have the Satellite A100-233 and seagate 500 GB 2.5 "HARD drive.
  I can install this HARD drive on my laptop?

  Put it inside and do a test. Why wait for an answer when you can find it on its own.
  It will be fine if yo9u may inform this community if it works well or not.
  This information is always welcome.

• Red hat enterprise linux rhel 6.4 64 bit vm machine installation successful but after the reboot shows BLACK SCREEN

  I'm under vm workstation 10.0.1 on Windows 7 Ultimate 64 bit, I created a VMware machine in my computer using Media 6.4 RHEL, after all, installation has been completed successfully, The RHEL installation wizard suggested to restart, after restart, the virtual machine shows BLACK SCREEN WITH CURSOR of A in the upper left. FYI my system supports the "virtualization technology intel. Please help, if someone solved this issue. Thank you.

  Thanks for help.

  The problem has been resolved. As I said I was installing OS and then the problem comes after the reboot.

  I selected all the graphics software during the installation of linux. and it worked.

• I connect and portable shoot only black screen

  I connect to my hp Pavilion and it takes me only a blank black screen. I can move the cursor on the screen but can't do anything else.

  Hello

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  At the bottom left, select details (if it is not already selected).

  Click in the header of column Nsoul to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  If your office now appears, download AdwCleaner on the following link (there are 4-5 second delay until it's available)- Save in your downloads folder.

  https://toolslib.NET/downloads/finish/1/

  A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

  Click the scan button.

  When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

  It starts on the desktop correctly now?

  Kind regards

  DP - K

• I accidentally put 100 files on my desktop and it went to black screen and will not work

  I accidentally put 100 files on my desktop and it went to black screen and will not work

  Hello

  Following methods and check if that helps.
  
  Method 1:

  Step 1:

  Start your computer in safe mode and check if it starts very well.
  
  Step 2:

  If the system starts in safe mode, then there would be a third-party software, causing the issue to occur. I wish that you start your machine in a clean boot State. Clean boot helps eliminate conflicts of third party software.

  Note: Follow step 7 to your computer as usual.

  Method 2:

  If this does not help, you can perform System Restore in safe mode.

• Netflix in media center do not download movies and just get a black screen

  Hello world

  I can open windows media center, but when I try to watch a movie instantly it not to download the movie and just get a black screen. Sometimes Media Center stops as well.

  If someone here can help would be great!

  Uninstall and reinstall Silverlight.Make that you have the latest version of Silverlight installed on your system.

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

• Windows 7 starts and ends at a black screen

  Windows 7 starts and go through the loading screen and end up a black screen until password with the slider screen try and run across the network normal mode etc. and ends at the screen even please help

  If you can start the computer in an environment of Safe Mode with command prompt , you might be able to make the operational machine through the system restore. Here is an article on how to get if the process.

  Start the restore of the system from a command prompt

  If you can't in SafeMode with command prompt environment on initialize toward the top, you may need to use the recovery partition to reinstall Windows by default. The initialization process differs from manufacturer to another computer, but it involves usually typing a combination of key or combination of keys at startup.

  Note that this process will remove probably all documents, images, programmes, etc. that you have installed/created since owning the computer. for example, it will restore the computer to a State identical to when it left the factory. Use this class as a last resort and consider having a computer technology to remove the disk to retrieve all personal data (documents, photos, etc.) that are irreplaceable.

• My computer takes 20 minutes to start and also has a black screen

  Hello world

  I have a Dell Dimension 9200 and recently every time I start my computer or it reboot, it takes 20 minutes to get to the desktop and also has a black screen. This issue has occurred only recently and I don't know what is the cause and so advice would be welcome.

  Other strange things include all my system restore points are missing and so I can't return the operating system to a previous date when it was working properly.

  And when I did a test on the hard disk, one of the internal drives have had a "Fail" result - Code 7 back. I don't know if this was caused by a virus or is the result of a mechanical failure in the hard drive itself.

  Thank you very much.

  Gordon

  

  Bev.

• Satellite L650-0ED - ports external monitor and turn off WiFi

  Hey,.

  1. I have a Satellite L650/0ED, I was wondering if the HDMI and the external monitor port start when starting and if they cause the start time of the laptop to be slower. If they do slow down the start how disable them you using Device Manager, since I looked, I tried to disable the Device Manager; but I can't find them anywhere on the list of devices.
  They have a special code name or something?

  2. based on my understanding, the manual of instruction/userguide Toshiba mentions if I press FN + F8 it turns off the wireless amber light but this is not the case, since the amber wireless is still or not. I have the wireless active or disabled.
  It say it's so I have the wireless off of amber or the - Orange must be turned off when I press FN + F8 and is not, why is this?

  Thank you

  Hey Buddy,

  1. No, they cause t a slower start. He doesn't know me and as long as I know it of not possible to disable the ports in the BIOS. Then n t you worry about this, even, you have connected external screens, boot time is the same.

  2. Yes, usually you can activate the WLAN functionality by using the FN + F8 key combination.
  I put t have the laptop in front of me, but normally if you don t have a hardware wireless switch, you can disable the wireless network adapter in the BIOS. Just put permits for disabled people and that should be all! :)