How backup VPN configuration between two universities?

Similar Questions

• How to remove spaces between two separators

  Hi all

  How to remove the spaces between two separators, but space is required between the characters.

  I have an input as string below

  "# ABC DEF GHI # JKLMN.

  Expected string as below. Here the space between DEF GHI is required, but other spaces must remove.

  "ABC #DEF #JKLMN GHI".

  I tried with REPLACE it but it removes all spaces and this is a mistake.

  REPLACE ('ABC # DEF GHI # JKLMN', ' ')

  Please guide me. Thank you.

  For example, if the hash/pound symbol may not have a space before and after, then you need to change the regular expression to use ' * ' instead of ' + '...

  SQL > ed
  A written file afiedt.buf

  1 Select trim (regexp_replace ('ABC # DEF GHI #JKLMN',' (* # *) ',' #'))
  2 * of the double
  SQL > /.

  (REGEXP_REPLA TRIM
  -----------------
  ABC #DEF #JKLMN GHI

  Always be clear in your requirements.

  Re: 2. How can I ask a question in the forums?

• How to find days between two dates in days

  Hi, I want to get the days between two dates, expressed in days, how can I do this?  For example, I date i.e. 1 October 10, 2013 (Thursday) and 2 as October 13, 2013 (Sunday).  How can I get a production of:

  Thursday, Friday, Saturday and Sunday, which are the days between Oct. 10-13, 2013.  I hope you understand my point.  Thank you

  You can try something like this

  CURSOR LOAD_PROF is

  SELECT load_prof1, v_time_profile_day

  OF load_profile_test

  WHERE profile_day IN (select TO_CHAR(:day1+level-1,'Day')

  of the double

  connect by level<>

  );

  Kind regards

  S Pax

• How to find directions between two locations other than my current position. I finally gave up and use Google Maps.

  In the latest version of cards, there is not apparent until you find directions between two places when or is your current position. In earlier versions, we enter in two places of departure and destination. In the new version, you enter your destination into a search window, but there is no place to enter a starting location. The application assumes that your current place of residence is always your place of departure. It is a remarkable oversight by designers. Am I missing something?

  If you go to maps, you can search for a location. Once you find the place, press the route button. It is from your current location, but if you type on my position, next: you can change the location that you want the management of.

• How do I telnet between two computers in a network?

  Original title: 'telnet '.

  I want to make a connection telnet between two computers in a network, please guide me.

  I want to make a connection telnet between two computers in a network, please guide me.

  See this to start by...

  http://Windows.Microsoft.com/en-us/Windows7/Telnet-frequently-asked-questions

  If you want to use telnet via the public internet, I highly recommend to use Secure Shell [SSH]. Free (for personal use) client SSH for Windows include the mastic and the TBM. Of course this assumes that you have a server SSH running on the remote network.

  http://www.Bitvise.com/tunnelier.html

  http://www.chiark.greenend.org.uk/~sgtatham/PuTTY

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• How to add images between two elements

  I'm having a great time to find it.  I was asked to add an image between two elements.  Here's a mockup of what the layout with the image will look like:

  

  But I tried everything and I keep breaking the code and can't make it work.  I did a stripped down version of this page so you can see what the code looks like:

  Homepage

  Any help is appreciated.  Thank you.

  This will get probably get a bit of a hole - (MAKE A BACK-UP OF YOUR PAGE FIRST)

  Find the code below:

  http://www.amazon.com/Reclaiming-Parkland-Bugliosi-Assassination-Hollywood/dp/1626365334/r ef = sr_1_1? s = books & ie = UTF8 & qid = 1378592566 & sr = 1-1 & keywords = recovery + Parkland"> Amazon.com»

  Get rid of all the code that follows - down up to this code:

  The decline and fall of Jim Fetzer

  Copy and paste the code below instead:

  Image goes here

  Press articles

  Comments

  News

  Then style upward a little h2 tags with some css:

  I'll let you get back links/anchors on the h2 tags.

• How to caluclate tat between two dates of a timestamp field

  Hello
  could help to caluclate days between two dates and unique timestamp filed with this
  query
  Select * from m_activity_transaction where actn_opp_id in)
  Select actn_opp_id in the m_activity_transaction where ACTN_ACTV_ID = 218
  Actn_opp_id group
  view count (*) > 1) and ACTN_ACTV_ID = 218
  order of actn_performed_on
  IAM get output is
  
  ACTN_ID ACTN_OPP_ID ACTN_PERFORMED_ON
  319415 95831 JANUARY 27, 12 AM 11.06.20.000000
  315249 95831 8 FEBRUARY 12 05.32.54.000000 PM
  301927 103509 20 DECEMBER 11 04.01.43.000000 PM
  301458 103509 19 DECEMBER 11 04.51.03.000000 PM
  294841 115840 10 JANUARY 12 03.20.12.000000 PM
  312062 115840 11 JANUARY 12 05.17.06.000000 PM
  
  Normand to caluclate number days between two dates like January 27, 12 AM 11.06.20.000000 and I 05.32.54.000000 8 February 12 PM where actn_id is unique AND ACTN_OPP_ID IS NOT UNIQUE.
  Thanks in advance,
  VVR.

  In this way.

  with data as
  (
  select 315249 a, 95831 b, to_date('27-JAN-12 11.06.20 AM', 'DD-MON-RR HH.MI.SS AM') dt from dual union all
  select 319415, 95831, to_date('08-FEB-12 05.32.54 PM', 'DD-MON-RR HH.MI.SS AM') from dual union all
  select 301927, 103509 , to_date('20-DEC-11 04.51.03 PM', 'DD-MON-RR HH.MI.SS AM') from dual union all
  select 301458 , 103509 , to_date('19-DEC-11 04.01.43 PM', 'DD-MON-RR HH.MI.SS AM') from dual union all
  select 363810 , 144656 , to_date('27-JUN-12 12.43.28 PM', 'DD-MON-RR HH.MI.SS AM') from dual union all
  select 363500 , 144656 , to_date('26-JUN-12 11.41.50 AM', 'DD-MON-RR HH.MI.SS AM') from dual union all
  select 363354 , 144656 , to_date('25-JUN-13 12.41.13 PM', 'DD-MON-RR HH.MI.SS AM') from dual
  )
  select a, b, diff_in_days
    from (
          select a, b, trunc(dt - lag(dt) over (partition by b order by dt, a)) diff_in_days
            from data
         ) tab
   where tab.diff_in_days is not null;
  
  A                      B                      DIFF_IN_DAYS
  ---------------------- ---------------------- ----------------------
  319415                 95831                  12
  301927                 103509                 1
  363810                 144656                 1
  363354                 144656                 362
  

• Question about encryption for a VPN established between two of our sites

  We have two routers Cisco 2951, one at our main location and one at a branch.  An engineer for a local company came and worked all the parameters, including the VPN between the two men.

  For an upcoming exam, the firm wanted to know what kind of security/encryption has been implemented between the two routers.  The engineer is no longer available, so I've went over our configuration files for each of the routers and will have questions about what to tell them (I'll be the first to admit that some of this stuff is over my head).

  I enclose the portions of the configs with "crypto" information he put in place.  If you see something wrong, or need something extra, let me know.

  Thanks in advance!

  That's what you use:

  Phase 1: 3DES, SHA1, PSK, Group2 DH (1024 bits), life time 86400 s

  Phase2: 3DES, SHA1

  Which is today considered legacy crypto, but probably nothing to worry. The crypto-config has always considered that there is "room for improvement"...

• VPN connection between two pix firewall problems

  Hi, trying to create a VPN between the firewall two pix a 501 and a 506e.

  currently on the 506th pdm shows 1 IKE tunnel in the stats, but it displays then return to zero. The two hosts of pix can access the web and ping each other gateways.

  I posted the 506th config but the 501 config is the same.

  outside IP for pix 506th = a.a.a.a

  outside IP for pix 501 = b.b.b.b

  Internet service provider ip of the gateway to 506th = x.x.x.x

  Thank you

  Alex

  Hi Alex

  See the configuration on the other side (PIX501) it will be difficult to solve, you'll need to be sure when it is a phase failure 1 or phase 2.

  Please note between the two PIX IPSec negotiation fails if both of the phases SAs IKE do not match on the peers.

  Cordially MJ

• How SSL VPN packages for two ASAs clustered licenses

  Hi all!

  If I have installed two Cisco ASA 5550 (ASA5550-BUN-K9) in failover mode, which I know support only 2 concurrent sessions of SSL VPN and you want to upgrade my boxes to support 15 AnyConnect SSL VPN sessions, how many licenses packages I need to buy?

  An ASA5500-SSL-25 for both boxes or two ASA5500-SSL-25 for one per box?

  Depends on what version of ASA you are running.

  If you are running version 8.3 and above, then you just buy 1 ASA5500-SSL-25 for a failover pair and it would work. If you buy 2 ASA5500-SSL-25, one license per box in failover pair, then the license gets grouped into 50 SSL user license.

  Here is the license information for ASA version 8.3 for failover pair:

  http://www.Cisco.com/en/us/docs/security/ASA/asa83/license_standalone/license_management/license.html#wp1315746

  For ASA running version 8.2 and below, you are required to buy 2 ASA5500-SSL-25 (one of each ASA in the failover pair) as the license should be exactly the same for the pair to failover to work, in the earlier version of the SAA.

  Hope that makes sense.

• Site to Site VPN tunnel between two ASA

  I use the Site Wizard to Site on an ASA 5520, and ASA 5505 of the ADSM. Both are using 8.4 (5). When you create configurations. You follow the wizard configurations with manual what ACL s to allow the traffic of every subnet connected to talk to each other? Or they are automatically generated in the configuration file? Have not been to school yet to understand how to create the CLI VPN tunnels and what to look for.

  Thank you

  Carlos

  Hello

  First, I would like to say that I don't personally use ASDM for the configuration.

  But you should be able to configure all the necessary elements for a connection VPN L2L base through the wizard.

  I guess that typical problems to do so could relate to the lack of configuration NAT exempt or might not choose the setting "Bypass Interface Access List" that would mean you would allow traffic from the remote site in the 'external' ACL of ASA local interface. Like all other traffic coming from behind the 'outer' interface

  If you share format CLI configurations and say what networks must be able to connect via VPN L2L then I could give the required CLI format configurations.

  -Jouni

• VPN IPSEC between two networks

  Hello-

  For these last days, I've been banging my head against the wall with this problem.

  I have two IP networks that have the same IP that I need to create an IPSEC tunnel between.

  Here's a crude diagram:

  192.168.1.0/24--[Cisco 1920] - Internet-[cisco RV082]--192.168.1.0/24

  I know that I should make some sort of NAT, but from what I've been through the RV082 it's not like he can do it.

  I tried to get this work is this:

  192.168.1.0/24--[Cisco 1920] - Internet-[cisco RV082]-192.168.33.0/24-[Belkin N300 consumer router]--192.168.1.0/24

  But once I changed LAN IP of Belkin 192.168.1.1/24 I lost connectivity to the "WAN" port, I was clicking on the side LAN of 1920. (I think he was trying to route the traffic via the LAN port is even if it is entered on its WAN port)

  Someone has some tips to get me going in the right direction?

  Thank you

  Greg Smythe

  Hi Greg,.

  If you have same subnet on both ends, then Yes you are right the NAT is the only option. You need to do NAT on both devices. As you say that RV is unable to do so I don't think that if you have any othe roption to change the subnet on one of the end. Which is not an easy option

  Thank you

  Jeet

• How to alternate Mondays between two dates?

  Hello

  I try to get the dates for other occurrences of a given day (say Monday) in a given range of dates.  How is it possible in a SQL query? Thanking you in advance.

  Hello

  Here's one way:

  WITH params AS

  (

  SELECT NEXT_DAY (TO_DATE (February 7, 2014 ', 'DD-Mon-YYYY') - 1).

  , 'MONDAY '.

  ) AS start_date

  , TO_DATE (31 March 2014 ', 'DD-Mon-YYYY') AS end_date

  OF the double

  )

  Start_date SELECT + ((LEVEL-1) * 14) AS a_date

  OF params

  CONNECT BY LEVEL<= ceil="" ((end_date="" +="" 1="" -="" start_date)="">

  ;

  Of course, you can easily change start_date and end_date and the day of the week target also, to all you want.

  This assumes that NLS_DATE_LANGUAGE = ENGLISH.  If you can not sure about NLS_DATE_LANGUAGE, then the same basic idea works, but the function calls are a bit messier.

  I hope that answers your question.

  Otherwise, put one or two series of the summer (start_date, end_date, day_o_week) and the desired results of each set.  Point where the above query was to produce erroneous results, and explain how to get good results in these places.

• How to view - (hyphen) between two dates

  My requirement is if I select the 'count' and 'to date' in the dashboard to the release of the report to display as "date-to date" could any body please help grow me in this...

  Hello

  If you want to use the strategy of Mahesh, you cannot use the BETWEEN operator. You will need for different layout columns, with a DATE data type and two presentation variables. Then, in your report, instead of saying: YOUR_DATE IS INVITED, you will need something like YOUR_DATE between @PRES_START_DATE AND @PRES_END_DATE.

  If you absolutely must use the BETWEEN condition, then you will need to define two new logical columns in your file of RPD. These two logical columns will be MIN and MAX of the column in question. When you pull these in your report, they will return the MIN and MAX date values that lie in BETWEEN your condition. You can then use the @ - @ syntax to display two dates with a hyphen.

  Hope this helps and if you need more information, do not hesitate to ask.

  Best regards

  -Joe

• How to find values between two months (from January to the month prompted)?

  Hello

  I need to create a filter on the name of the month. That is to say of January of the year for the 'guest' month of guest of dashboard.

  Ex: If I ask year and month of year in 2013 and March respectively. I should get values for Jan 2013, 2013 Feb and March 2013.

  I can't try one between because that it only works on numeric values.

  I can't have a number of months in prompt because this isn't the condition and I am not allowed to.

  I tried the below query report filter

  «Sun - times» "" Fiscal month "< = (select"Dim - time". "" Fiscal month "where"Dim - time. " ("' Name of the fiscal month ' = @{PMonth}) PMonth where is the Variable of presentation" for months ".

  But it's not working

  Help, please

  Thank you

  If it is 11g then try to use the column twice.

  Thank you

  http://cool-bi.com