resolution problem with my monitor every time I turn on

Similar Questions

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Hello... I'm having a problem with ps cc ever time that I create a layer mask

  Hello... I'm having a problem with ps cc ever time I create a layer mask and choose the brush in a first time, he began to remove the areas IM brushing away then stopped. After pressing X button was able to brush the image and then he kept repeating the process of pressing X and it pixlelated areas of the image. And now the masks brush and layer don't work at all whenever I start a new project.

  Hi dtain,

  Can you please try reset tool.

  To reset a tool, you must first have the selected tool. Then Ctrl-click (Windows users: right click) the button tool preset in the Tool Options bar.

  

  When you click this button, you will see a small menu and you can select Tool Reset to reset the current tool to its default value or reset all tools to deliver all the tools to its default value. Once selected, the tool will act as the first time you have used it.

  

  Using this simple method to reset your tool with a single click, you can quickly remedy any situation where the tool does not correctly and to maintain the flow of creativity going.

  ~ Jitendra

• Premiere Pro CS4 - problem with the monitor program.

  Hello. I am not able to solve the problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline panel and read it in the monitor program, vision in the monitoring program is not monitor of race: black or a small part of the picture appear... sometimes changing colors. ASUS P5QPRO Intel 9550 and Sparkle Nvidia GeForce 9800 GTX + 1024 DDR3; directX and the latest gpu driver are installed. Different configurations of Strath discs have been tested. Where I'm wrong?

  Although largely in the max. PrPro range, which is always likely to much larger size than that required. This ARTICLE will give you general information and a workflow possible.

  Coming from the camera, JPEG should be RGB already, so no problems with CMYK.

  Good luck and hope that helps.

  Hunt

• Form diagnosis of prints every time I turn on the printer.

  I recently put in a new cartridge black ink (HP product) and every time I turn on my printer prints a diagnostic sheet - this is the first time that this has happened and I used the printer for about 4 years. Thanks for any help.

  OK, the Photosmart C3180 see the troubleshooting here page.

• I have a new Omni. Can I put it, so I did not type my password every time I turn it on?

  I have a new Omni.  Can I put it, so I did not type my password every time I turn it on?

  If there is an option to check that I missed.

  If you go to user accounts, you can change the password. Create no password in the new password just press ENTER to block.

• T520 problems with external monitor resolution

  Hello

  I'm standing right now waiting on hold for a Lenovo tech support rep, so I thought I'd just post my problem here. I just bought a Dell ultrasharp monitor U2713HM and am trying to connect it to my Lenovo T520. We sometimes see the monitor and sometimes it isn't, but this isn't my main problem. The monitor is supposed to be 2560 x 1440, but all the resolution settings are grayed out. I know that the Lenovo can support it because my last screen is a Samsung SyncMaster supporting 2560 x 1440, and it was beautiful (beautiful until the monitor exploded).

  I was on the phone with Dell and Lenovo, and so far nobody has been able to solve the problem. I've updated the graphics driver NVIDIA (NVS4200M) to the latest version (310.90) as suggested by Dell, and I changed the cable VGA to DVI - D cable (connected to the Dual Link adapter), as suggested by Lenovo. He stlil does not work.

  I could use some suggestions. I'm not grumpy at all, so it's quite frustrating. Thank you!!

  
  

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• Problem with mail from a Time Machine backup

  Hello

  After I restored my wife with Time Machine MBP, it tried to start "Mail" and she gets a message:

  «Mail must import your messages (etc.)...» »

  So when I click on 'continue' it shows a # 52 847 ridiculously high message and he gets up to 981 photos and videos, then she stays there for hours. If I cancel, next time I try, it happens to 980, then next time 979 and so on, leaving fall 1 number every time and it hangs still for hours, until I turn it off.

  If I try to restore messaging of the backup, I get a message:

  "Mail can not be changed or deleted because it is required by Mac OS x."

  So essentially, she cannot open her e-mail software.

  What can I do to get the operational e-mail program?

  Well, problem solved.

  I did a reinstall TM on a backup earlier and got the same result with mail, so I just him to run the import as long as she could.

  Problem disappeared.

  Thanks in any case

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Problem with new monitor when you play Cityville

  Recently installed new monitor (HP2511x), now the zoom in/out function does not work in Cityville.  It works very well to Farmville, and it still works in Cityville on my laptop, so it's something on the new monitor.  Any ideas?

  It sems to be a chip on board:
  http://en.Wikipedia.org/wiki/GeForce_6_Series#GeForce_6150SE

  You have no problem with your old monitor?
  Did you use another resolution (bottom) with the old?
  You can try to fix this old resolution for your new monitor, too.

  Then there should be no problem for your graphics chip.

  HTH
  C.

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them