How better to connect a parallel to a network printer

Similar Questions

• How can I connect to a remote scanner (network printer) using Windows 7 Fax/Scanner. It says scanner is not connected, but I am able to print remotely.

  How can I connect to a remote scanner (Hp Laserjet 2940 printer on network) using Windows 7 Fax/Scanner.  It says scanner is not connected, but I am able to print remotely.

  You can print on most printers remotely, but this isn't the same for scanners

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• How can I connect my laaptop on a local printer

  I have two desktop computers to connect to a printer on a wireless network that has been set up by someone else; How to connect my laptop to this printer?

  Hello

  1. What is the serial number and model of the printer?

  Try the steps below to install and configure the printer wireless in Windows XP.

  (a) download the latest software for your printer Web page printing. To locate the software or drivers, type your model number and the "pilots" in the search box on the manufacturer's website. Alternatively, you can install it from the CD supplied with your printer.

  (b) temporarily insert the USB cable provided in the printer and the computer. Plug the power cord of the printer and it lights up. XP can automatically detect the printer and start the "Add printer" Wizard If the wizard does not auto-run, proceed to start it manually.

  (c) click on the menu 'Start' in the toolbar at the bottom left and look for the "printers and faxes". If you don't see it, open "Control Panel" and you should see which are listed there. One click to open it.

  (d) select "Add a printer" in the list on the left of print jobs. The "Add Printer Wizard" will begin and guide you through the installation process.

  (e) search for your printer when you are prompted and locate your new wireless printer. XP should automatically install the printer software, that you downloaded earlier. He may ask you to approve the installation; Click 'yes '.

  (f) to complete the wizard and XP displays the name and location of your new wireless printer. Follow the same process with other XP computers on your network if you want they can also print on the printer wireless.

  (g) remove the temporary USB cable and print as usual from any computer on the network.

  You can also view the document to the printer that you got with the printer for more information on how to set up the printer.

• HP Laserjet Color mfp M175nw 100: How can I connect the router to secure network?

  How do you set the printer to connect to the network through a router password? Where would you want to enter the password?

  On page 43 of the technical reference software, it shows how to configure the wireless through the built-in Web server.

  This link also have other reference documents (manual, software reference technique, quick reference Guide and Setup Guide) that might be useful in the future.

• How can I connect Windows XP to several networks, Wi - Fi for internet and the other for file sharing?

  On windows XP, I need to connect to two different networks. Free wifi for the internet and the other for file sharing.

  Different gateways, different static address, same subnet mask. But there is problem when operating simultaneously and must

  a network must be disabled. Is it possible to run simultaneously?

  original title: served various networks simultaneously on windows xp

  Go to where you have configured the static IP addresses for your network adapters.  Leave the "default gateway" blank for your local file sharing adapter and insert a valid default gateway for your wifi Internet adapter.  Of course, this will limit your adapter in a single subnet - which should be OK for use at home or small office to share local files.

  This should work as long as the two physical subnets have two different subnet numbers. In general, this means that the first three digits of the IP address of the adapter can not be the same on both adapters - if they are, then you need to make one of the subnets. (i.e. one is 192.168.1.xxx and the other would be 192.168.2.xxx).  This is usually accomplished in the router configuration page.

  HTH,
  JW

• How can I connect Vista PC to the network?

  I have a Windows Vista laptop, a Windows 7 netbook and desktop Windows 8.1 that all connect to the WiFi network in our House OK.

  On the desktop, I created a homegroup with a password, and can easily access and exchange of files between the netbook and desktop computer (Windows 7 and 8.1 respectively).

  However, when I try to access the desktop from the laptop, Vista asks me a username and password and I have no idea what username and password he wants. I tried every username that I can think of, and the only password I can think, which is one for the homegroup on the desktop, and nothing seems to work.

  I have worked on the Microsoft Web site to set up a Vista machine Exchange files with another machine, the instructions, but can't take the step that says: 'asks to enter the user name and password.

  Please can someone help me, because I'm out of ideas.

  Thanks in anticipation,

  Mike

  You mentioned in your original post that you have set up a homegroup.  Unfortunately, VISTA is NOT compatible to work in a residential setting.  The only way you can add to a network is to create the normal type of the Working Group (Home Network) network.  I hope this helps.  Get back to me if you need help.

• How can I send .ps file to the network printer

  I am trying to send the test.ps file to the network through the command copy PCOUNT_L6B-LH5 test.ps back Postscript printer

  PCOUNT_L6B-LH5-PES is the printer port. but the file cannot reach the printer.

  Please someone help me.

  Hello

   

  To do this, the easiest method is to share the printer using the network sharing then in the command prompt, run the command copy to sharing like this:

   

  copy test.ps \\127.0.0.1\

   

  You can set the printer share name to some youset it when they share the printer.

• Error 800703eb when you try to connect the network printer

  HII guys, can someone help me on this problem?

  I am trying to install the network printer. But I face the error code 800703EB and another description is cause to line 4 and 1 from vbs code tank.

  The following vbs code to connect the computer to the network printer:

  1. '
  2. ' Printers.vbs - Windows Logon Script.
  3. Set objNetwork = CreateObject
  4. objNetwork.AddWindowsPrinterConnection \\printserver\xerox2

  I am very grateful to the response of anyone on this issue, thank you very much.

  Hello

  (1) have you made changes before the start of this issue?

  (2) what is the brand and model of the printer?

  Perform a clean boot and try to connect to the printer:

  Step 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 2: Try to download and install the latest printer drivers.

  Please visit the websites below:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

• How to connect the parallel test using the logarithmic function Teststand database result

  Hello

  How can I connect a test result of 4 EHR tested in parallel using the logarithmic function Teststand database

  I use Labview 2013, 2013 Teststand and sequential model.

  The test is performed using a single digital card (SMU-6556). The FSD 4 is connected to the port of the digital map and is tested in parallel.

  Currently at the end of the test, I would have a report with all the measures, but I need 4 reports (1 report / dut)

  TKS

  
  

• How can I connect my printer 2600n wireless? my computer is a macro

  How can I connect my 2600n wireless printer.  my computer is a macpro

  It seems that the 2600n is a commercial LaserJet.  It may be better to post in the commercial LaserJet forums.

• my hp deskjet 840C is connected to my desktop, how can I connect it to my laptop computer in my network

  my HP deskjet 840C printer is connected to my desktop, how can I connect to my laptop in my network

  [Moved from Community Participation]

  Hello Stephen,

  You did mention the operating system installed in the laptop. Provide that information will help you provide better assistance.

  Basically, if your laptop and the printer are connected to the same network (or even router), you can configure and connect to this printer as a network printer in the laptop. The article I'm referring below has a tutorial on how to connect printers (Local and network), please go through the information in there and see if it helps you as well.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-7

  If you need assistance, just reply to the version of the operating system running on the laptop, and we'll be happy to help you.

  Thank you and have a nice day ahead!

• How can I connect HP Deskjet 1050 printer to my ASPIRE ONE Laptop D270

  How can I connect HP Deskjet1050 printer to my laptop ASPIRE ONE D270

  Chfergi975

  Have you read the manual of the printer?  Have you contacted HP?

  Generic help is all that we can give you.  You better go to HP, BUT the first thing you need to do is to install the printer driver.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• How can I connect to my server (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?

  Hello

  How can I connect to my sServer (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?
  

  Hello Marie Smith.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/

  Hope this information helps.

• How can I connect to someone who is hacking my network?

  How can I connect to someone who is hacking my network?

  Hi Frank,.

  What kind of network - your internet connection?  your intranet from home or the office (and it is wireless or wired or both)?  An ad - hoc network or a network based on the domain server (and if the latter, what type of server)?  The network hosts a web site, an exchange server that is accessible by internet, or also allowed incoming connections?  How many computers is on the network and what are the current use operating systems and who do you think are presented?  If you use a router, is protected by a router security identifier unique and a password (no admin / admin or other default standard settings, everyone knows) and a unique key and what type of security type (WPA, WPA2,...) and what type of encryption code?  This can be verified by the computer and others need to be checked or enabled via the router you can reach most likely through your browser by typing 192.168.1.1 where you would normally enter a URL.  If this isn't the correct code, then see below for IPCONFIG and would probably be the address that you want as the gateway by default and possibly the address of the DHCP server or the DNS server address as well and use what is there instead.  What type of method of internet access (DSL, cable, Satellite,...)?

  How do you know if that someone is hacking your system?  What evidence do you have that it happens or happened?  How do you think that piracy happens - happens through your connections in real-time (as if someone used a remote access or remote desktop) or it occurs because you seem to see the proof of it (if so, what evidence)?  I am trying to determine if a person has a path in your system directly or whether you are infected with malware that allows a periodic access or 'appear' as you are being hacked, when you are just infected.

  Do you notice it when it is real or only later after it occurred?  What exactly is the pirate make - information collection, change of information, install programs, remove programs or information, theft of bandwidth, or you are not sure and don't know exactly?  This happens only when you are connected to the internet or does it also occur when you are not connected and just using the computers and devices that are other interconnected?  If it isn't when it is connected to the internet, which helps limit the possibilities.

  If you are present and it's ongoing, click on start / all programs / accessories / right-click on command prompt and click Run as administrator.  Then type IPCONFIG/all and enter.  Which should display all connections to your computer, and if anyone is connected, this connection must appear, as well as login information and include information such as address TCP/IP (which may be useful to know).  Create a capture image or printscreen of the information.

  If you use Vista or Windows 7, go to start / Control Panel / Network and sharing Center / discover computers and devices.  Is there a link that doesn't seem right or that you don't recognize?  Come back and click on manage network connections.  Are there connections that you don't recognize?  If so, click on them and learn what you can about the properties and other information - create a capture of information or save a printscreen image.

  You use the Windows Firewall and is it activated and functioning?  Open and check exceptions and remove the items that you do not use or do not need - by default adds a lot of things that most people do not use. and everyone is a path in your system.  The less open ports, the better.  Do not remove everything you really need, but uncheck everything you don't need (you can always add it back later if the need ever happens).

  It's just a start on what to do to gather information.  I need the results and answers to give additional advice on what to do next - depending on what you have to say.

  Most likely, we will be able to best prevent access or possibly with the help of your ISP and the ISP of the hacker TCP/IP address (if we find the it), be able to identify who it is and stop it or help you gather enough information take legal or security action against the person or persons responsible.  Ago probably pirates out there that can do what you're tempted, but also provides methods of hacking (and that is basically what YOU want to do) is not something we support or help someone to do here.  To help you protect your system is one thing and we'll do what we can to help here - teach you how to hack the somone who is hacking you is quite another and we will not be involved in this.

  ***********************************************************

  In the meantime, in case there is an infection as opposed to a direct hacking, update and run a full scan with any security software you use.

  If you do not have because they can help, try the following programs. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx.

  Check the following compliments from Stephen Boots - MVP:

  S ' ensure that the Windows Firewall is enabled.

  S ' ensure that all critical updates or important, including service packs for the operating system and programs are installed from Microsoft Update (Windows Update).

  -Make sure that Internet Explorer is version 8 or 9 and implemented to date with all patches.

  -In Internet Explorer 8 or 9, use the SmartScreen filter.

  -Make sure that the Internet IE security settings are at least put to fire medium-high (default).

  -Turn on the pop-up blocker in Internet Explorer.

  -On Vista and Windows 7 make sure that User Account Control (UAC) and doesn't work with elevated privileges.

  -Make sure that automatic updates of Windows are set to notify at least, but the preferred setting is to download and install automatically. If you update manually, be sure to update as soon as possible after being informed of updates available.

  -Make sure that installed applications, including Adobe Acrobat, Adobe Flash and Java are at their latest versions. Many vendors are regularly updated and fixes security vulnerabilities.

  -Never click through links from unknown sources and be careful, even if they are from a "reliable".

  -Do not open attachments in unsolicited e-mail.

  -Practice safe web surfing.

  To ensure that you are not infected (or remove the suspicion that you are infected which is often the case in such situations and is done either by hackers or may appear as the pirates are active when it is just a system infected - or if more than one, you have several computers connected), please follow these compliments of recommendations of JimR1 - MVP :

  You are running Microsoft Security Essentials?

  If Yes: start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and support and select the option for phone, chat or email (options vary depending on the region)

  If you are in North America, you can call 866-727-2338 for a free Microsoft Help for infections of virus and spyware.

  Otherwise:

  You can start here: https://consumersecuritysupport.Microsoft.com/ or here: http://support.Microsoft.com/contactus/cu_sc_virsec_master?WS=support#TAB0 for the help and support for malware infections.

  If this does not work, or that they can't help, try one of the compliments of forums-remove malware following PA Bear - MVP:

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?Board=10.0 http://www.spywarewarrior.com/viewforum.php?f=5 http://www.dslreports.com/Forum/Cleanup http://www.Bluetack.co.uk/forums/index.php and http://Aumha.net/viewforum.php?f=30

  *************************************

  The first section will collect information about your situation so we can get an idea where to look and what to look for (and perhaps even determine if it occurs).

  The second section will verify that your computer or network is not infected (you should do this for all the computers on the network) or clean if they are and which remove the cause of the problem (of least temporarily).

  I hope this helps and await your response with responses, results and information.

  Thanks and good luck!