How can I activate on the network access Protection?

Similar Questions

• How to enable the network access Protection?

  How can I activate on the network access Protection, he tells me it's off and that it must be manufactured on. So please can you me how to enable Network Access Protection?

  You don't need to turn it on. Network access protection is a feature that for use in business and companies to make sure that only clients which are safe and meet certain security requirements could access the network location. It is something that will be in service by admin in a company if wanted.

  If your PC is part of the domain network and it is part of the company contact your admin to ask if this feature is applicable. Otherwise, don't need to worry about this. This is just to inform you about the status of the PAN and you don't need to do anything.

• What is the network access Protection Agent and when should it be on?

  It seems to be disabled by default in the Action Center Security Section.  What does if it is turned on?

  Hello

  The network access Protection agent service collects and manages health information for client computers on a network. The information collected by the NAP agent are used to ensure that the client computer has the required software and settings. If a client computer is not compatible with the health policy, it can be equipped with restricted network access until their configuration is updated. Depending on the configuration of health policies, client computers may be automatically refreshed allowing users to quickly regain full network access without having to manually update the computer. By default, the startup type of Network Access Protection (NAP), agent service is manual under services.msc.

  See also:
  What is the network access Protection?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-access-protection
  Networking of information that it pros

  http://Windows.Microsoft.com/en-us/Windows7/networking-information-for-it-pros

• Should I have the Network Access Protection Agent Service to start automatically on Windows 8?

  Hello!

  While I was looking for a completely different setting in Control Panel in Windows 8, I came across the center of the Action settings and noticed that the Agent of network access Protection service is not running. I open the computer management snap-in and noticed that the service is configured by default must be started manually. I looked for more information on the internet but I wasn't able to find a detailed explanation about his goal for a personal computer. The only explanation I found applied only to Windows Server.

  Is it really necessary to configure this service to start automatically on a home network, or can it be just left set to start manually? What is its use on Windows 8? Is this just in case the computer needs to access a network of business domain?

  I am running Windows 8 Pro 64-bit edition on an Acer Aspire 5552-5898 connected most of the time in my network domestic, although usually I connect to public networks. My computer is not configured to connect to a domain on a corporate network, not even using VPN. When I access my e-mail from this computer company account, I first need to authenticate with a code provided by RSA device before I can connect to Outlook (OWA).

  See you soon!

  Carlos

  Hi Cspork,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem.

  As I understand it, in the center of the Action the officer of Access Protection settings network service does not work.

  The network access Protection agent service collects and manages health information for client computers on a network. The information collected by the NAP agent are used to ensure that the client computer has the required software and settings. If a client computer is not compatible with the health policy, it can be equipped with restricted network access until their configuration is updated. Depending on the configuration of health policies, client computers may be automatically refreshed allowing users to quickly regain full network access without having to manually update the computer.

  The service can be left to be set to start manually.

  It is especially where the computer needs to access a network of business domain.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• How can I activate confirm the purchase dialog?

  I'm used to confirm a purchase. When I click on the buy button, a window popped up audit. THIS happens is no longer. How can I activate this return? I want to check that I clicked on the good article and make sure it has been bought and do not buy twice.is

  This function is used to work. It has stopped working and I don't belong in the menu bar to activate this return. How can I do this

  Try to edit > preferences > advanced > reset warnings.

  TT2

• How can I activate in the window manager for areo glass can be activated?

  After installation ATS for Microsoft Fix - It, I went to... check areo glass and he pointed out that my 'Windows Manager' was not enabled.   How can I go on the activation of the 'Windows Manager'?

  Execute plug-in software component services MMC (services.msc) find the two services, make a double click and set the startup type to automatic. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How can I activate all the keys on my keyboard?

  I have this beautiful HP Pavilion with Windows 7 Home Premium 64 - bit and an AMD quad-core processor.  The keyboard is the unit of HP supplied with the machine.  How can I get all the keys activated or enabled?  I tried to use the print screen button, but it won't work.  I clicked on the Start button and help and documented Support but can't seem to find an answer.  Any help would be greatly appreciated.

  I have this beautiful HP Pavilion with Windows 7 Home Premium 64 - bit and an AMD quad-core processor.  The keyboard is the unit of HP supplied with the machine.  How can I get all the keys activated or enabled?  I tried to use the print screen button, but it won't work.  I clicked on the Start button and help and documented Support but can't seem to find an answer.  Any help would be greatly appreciated.

  Do you understand what is the print screen key?  It takes a screenshot of your screen and put it in your Clipboard - is not, despite its name, print screen a printer directly.
   
  Try this:
  1) Press PRINT SCREEN
  (2) open Microsoft Word or Microsoft Paint
  (3) in the main body of the new document/image - click and press CTRL + V to paste the image into the Clipboard.

• How can I activate when the activation wizard does not start?

  When replacing my motherboard dead, my copy of Windows XP 64 bit would not start, then ran a repair installation. After the repair was finished, Windows prompt that there is significant variation in my system (correctly, as I was unable to get the same motherboard) and I want to activate Windows? After answering Yes, Windows fails to load the Activation Assistant. Nothing happens. After a few restart Windows now is no longer gives me the "3 days to activate" message. It goes directly to the guest of activation, but charges only my desktop background, and I can't do anything, including even shut down Windows. How can I force the system to launch the Activation Wizard?

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• How can I activate / display the layer selection indicator?

  Hello

  I use Indesign CC 2015 since shortly after its release. As in previous versions of InDesign and other applications (such as Illustrator) Adobe, there is a useful feature in the layers panel, which allows direct selection of a layer or layer point. It appears in the layer panel to the far right of the layer element. It is a small square and it becomes highlighted/provided that layer/item is selected. I have a page of InDesign CC 2014:

  

  It's a blue square in the screenshot above, next to the pencil icon bit. This square icon disappeared from my indesign layers CC 2015 Panel. I searched preferences, Options for the layer, options, modes of display panel, I can't, and I use it very frequently. How can I turn this feature on? Help, please!

  Thank you in advance.

  -Aaron

  See replace your preferences

• What is the network access Protection?

  What is the simplest and most effective way to protect a home/business wireless network? (Other than WEP or WPA encryption).

  Hello RickMetta,

  Thanks for your post.  There are many methods that can help secure your wireless network.  Take a look at some of the literature that I've linked below:

  http://www.Microsoft.com/windowsxp/using/networking/security/wireless.mspx

  http://www.Microsoft.com/security/online-privacy/home-wireless.aspx

  http://TechNet.Microsoft.com/en-us/network/bb530679.aspx

  See you soon

• How can I activate / change the settings on the user environment debug log in Windows 7?

  We try to understand the cause of the... slow user connections would enable logging documented so that we can determine where the delays are happening...

  Hello

  The question you posted would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How can I activate on the slab?

  I don't know why but my firefox data have been washed when I deleted a program that has been installed with some other program, that I needed. Now I don't have the tiles as my start page, which was really useful and effective. I saw the explanation on the tiles, but I don't see the gear sign under the meny with three horizontal lines button.
  I went to 'Options' through the above Menu button and set the start as tab page and the windows unfortunately, it still does not and I'm lost. Please help me.

  Hi, try this: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.newtab.url and make sure that 'Value' is defined Subject: newtab (click right to change, if necessary, by taking care of not to change what anyone else).

  Also, in Options > general tab, make sure that 'When Firefox starts' is set to "Show my homepage." And Home Page is set on on: newtab

  If your question is resolved by this or another answer, please take a minute to let us know.

• How can I activate/disable the display of a scrolling text object?

  I am a relatively new user of Captivate and I am using the Interaction of learning in 8 Captivate text scrolling. Specifically, I would like to have a button on the screen when you click it, the drop-down text box will be displayed for the learner. In addition, when viewing, I want a REJECTION or button CLOSE to allow the user to hide the drop-down text box. Basically, I want them to be able to toggle the scrolling text box market at their convenience. I have the following set in place.

  1 READ MORE graphic.

  2. click on the box 1 interaction drawn at the top of the image to READ MORE.

  3 interaction marquee training.

  4. close.

  5. I have a Click Box 2 cartoon above the button interaction CLOSE.

  6. I have items 3 and 4 together to form GROUP_1.

  7 GROUP_1 is set to NO VISIBLE output.

  8. click on box 1 has defined action so that the success is to see THE GROUP_1.

  9. click on box 2A action defined for that success it is HIDE GROUP_1.

  Here's what it looks like:

  

  When I saw my project, the first part works fine, I click on READ MORE and my scroll text box and a button CLOSE appear as they should. However, when I click the button CLOSE, it moves to the next slide instead of simply to hide the group.

  Also, if I publish the project, the drop-down text box appear not at all. The button CLOSE pops up so when he is supposed to, but the space where the text box should appear does not display anything. I tried the consultation in Chrome Version 43.0.2357.132 m, 11 Version IE and Firefox v39. It seems to be related to the area of text scrolling in a group because I put a box of scrolling text on a separate screen and it shows well in all browsers.

  So, I'm looking for advice, including at - it an easier way to achieve the goal of enabling/disabling of the scrolling text box on and off the screen? TIA!

  Dee

  One thing you need to know using unique actions on objects interactive such as click on boxes or buttons will also trigger an action to continue later by default.  This is probably why your slides advance when you don't want to.  To work around this problem, you must replace the shares you are currently using with stock Standard or conditional Actions that do the same thing.  They don't progress not the timeline unless you stipulate specifically action continues or a jump to slip as well.

• How can I get around the global script protection in my CMS?

  We enabled on our server global script protection CF.  I am the admin of right.  The tags it will search and replaces it with "invalidTag" are the ones who are in the file of neo - security.xml:

  object | IFRAME | incorporate | XSS | script | JavaScript | applet | Meta

  However, we occasionally have to introduce these tags pages controlled by our CMS, which of course go in a database.  When this happens the tags are replaced by 'invalidTag '.

  I want and need script enabled to prevent protection against pirates, but I also want to be able to add these tags to our local CMS.  What is the best way to get around this?  At the present time, I actually had to remove' object 'and 'integrate' in the list however it scans, but I feel that this will defeat the purpose.

  When I googled this problem that I've seen a couple of hacks that had something to do with the re-write of the tag after he sent in the database, but that seems kind of varnish for me.  I wonder if I am missing a simple trick to get around this problem.  But then I suppose that if I could, a hacker could.

  Thanks for any advice.

  Thank you for that clarification. I think that you said succinctly yourself: 'I actually had to remove' object 'and 'integrate' in the list it scans against, but I feel that this will defeat the purpose. I think it's a matter of weighing the risks and benefits and then make a choice.

• In Windows 8 network access protection

  How can I activate on the network access Protection in Windows 8?

  Driley25,

  I understand that you must enable the network access protection feature in windows 8.

  Steps below:

  1. on the screen type Windows apps services.

  2. on the right, click settings

  3. on the left side, click local services.

  4. the PC will put you on the generic desktop and you will see the box.

  5. on the right to scroll down, the ads are in alphabetical order so just head to section N and should see.

  Please answer as soon as possible.

  Thank you