I have problems with my CD-ROM drive,

Similar Questions

• Problem with the CD-rom drive

  I have questions woth my CD-rom material. It says that Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  I'm using Windows 7 Home Basic Edition. Model the system is notebook PC from HP 630. Type of system is PC based x 64. Product ID: 00346-OEM-8992752-5008.

  Anyone with any advice/idea on how to solve this problem?

  Thank you.

  Hello

  Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• I have problem with High Definition Audio Driver Package (cannot activate code 10) my computer have no sound

  I lost the sound on my computer. I followed the instructions in uninstalling and reinstalling High Definition Audio Driver. but still does not.   error message (can't activate code 10)

  Hello

  ·         Where have you installed the drivers from?

  It could be that the driver that you are trying to install on the system is damaged.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I suggest to download the driver from the link below and check if the problem is resolved.

  http://218.210.127.131/downloads/downloadsCheck.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Also, I suggest you follow the steps mentioned in the link given below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-sound/sound-distortion-when-palying-any-sound/c2e47af0-7b3d-42d0-a64b-7aa2fe309481

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck

• Equium P200-1ED - have a problem with the installation of driver VGA

  Hello

  I have problem with installing driver vga video, every time in installion on that he stops

  Version: 6,14.10,4833 and it has error poping up...

  Help, please!

  What kind of error?
  Have you installed the chipset utility first?
  What version of Windows XP Home edition, you have installed? SP3 maybe?

• I have problem with my western digital portable HARD drive it still crashes!

  I have problem with my laptop HDD digital West sometimes when I plug it to my computer, my computer does not recognize it. But when he recognizes I can access the drive, but sometimes it is crash and restart once again it always happens... .this which should I do please help me! I have 9 a quick response...

  Other usb devices work on this PC?

  WD provides a free test utility, Data Lifeguard

  http://support.wdc.com/product/download.asp?lang=en

  http://support.wdc.com/techinfo/General/errorCodes.asp

• I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What do I need

  I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What should I do to change it?  I use DreamWeaver 2004 on a PC.

  You will need to correct the links that begin with "file".

  Now that your site has been defined, you just delete the bad links and DW left write the good ones for you.

  Click on the yellow folder on the property inspector, and then select the target page.

  

  If your site is small, you can edit the links manually (remove the part in red)

  content.htm file:///C:/desktop/localRootFolder/subfolder/subfolder/images/

  It would be useful that post you your code on the page so that we can see if you use the old technique or new for these links.

• problem with my cd/dvd drive... pls help!

  I have windows 7 ultimate! I have problem with my hard drive! I use lg drive and all of a sudden it reads only the CD-ROM and the dvd rom no! its disturbing me a lot! pls help! Thanks in advance

  Hello

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP 470 G3 laptop: I have problem with multimedia Audio Controller

  I have instaled Windows 7 ultimate 64bite on my laptop and instaled all the driver I have can not install for sound and can't find it. I have problem with Multimedia Audio Contorller I try to auto update, but it does not work. Please help me guys.

  Thank you

  I recommend that you contact HP technical support and submit a case of covered by the guarantee.

• I have problems with the mail (El Capitan)

  I have problems with the mail

  See writing an effective communities of Apple support question.

  Without knowing what are these problems there is no way we can really help you.

  Try this:

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.

• HP 1350 printer peripheral will not stay in offline mode. Problems with the Wi - Fi driver

  Hi I have a Dell desktop with printer HP 1500 computer.  After printing several documents, the printer has gone offline.  Troubleshooting indicates the problem with the Wi - Fi driver.  The printer is connected to the computer makes a Wi - Fi connection has to do with it?  I have add a portable Wi - Fi system recently.

  Hi, Mt48,

  Is the printer a 1350 aio or deskjet 1500?  You have listed two different models.

  Windows operating system?

  To resolve this problem, perform the following steps:
  1. Right-click on the my computer icon and choose manage, then click Design Manager.
     In the currency Manager there will be the USB root hubs (there may be several USB root hubs) perform the following steps for all root hubs:
  2. Right click on the USB root hub and go to properties, then the power management and uncheck 'Allow the computer to turn off this legacy to save energy' in the Design Manager.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=UK&TaskID=110&prodSeriesId=439153&prodTypeId=18972&ObjectID=c01475742

  Monofunctional and multifunction printers - HP printer is offline message appears on the computer and the HP product does not print

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02221706&lang=en&cc=us&TaskID=130&ContentType=SupportFAQ&prodSeriesId=306884&prodTypeId=18972

  Look for your version of Windows and select printing HP and the Scan Doctor - this is a diagnostic utility

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306889&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=306884

• I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

  I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

  Describe how you run chkdsk.

  That is what the report said: you have problems with the sys file?

  CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

  If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
  Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

  Here's how Microsoft explains this observation:

  "... CHKDSK may report that the disc is damaged, even when there is no
  current real corruption. This can happen if NTFS happens to modify
  areas of the disc on behalf of some programme activities that CHKDSK is
  review at the same time. To check a volume correctly, the volume
  must be in a static state, and the only way to ensure that the State is
  to lock the volume. CHKDSK only locks the volume when /F or/r (which
  involves the 'F') is specified. For example, you may need to run CHKDSK more than
  time so that it can complete all the steps in read-only mode. »

  If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
  Restart by answering Yes to the question:

  Would you want to check this volume to be the next time the system restarts?

  If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
  chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

  If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
  Winlogon events and a source have the date and the duration nearby time chkdsk.

  It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

• None of my screensavers does not work and that they have problems with direct3D

  Original title:

  I HAVE WINDOWS VISTA AND NOW IT SAYS SCREEN SAVER IS NOT COMPATIBLE WITH DIRECT3D, I HAVEN'T CHANGED ANYTHING WHAT CAN I

  I have windows vista home edition and have not upgraded to windows 7.  Now all of a sudden, I get a message that none of my screen savers work and they have problems with direct3D.  I don't know what happened.  What can I do? t

  Also, I need the sp1 and sp2 to upgrade my internet explore for later and I can't find these service packs for free anywhere. Please what can I do?  Thank you Tamara

  Hi Tamara,

  1. What is the brand and model of graphics card?

  2 - is the question also occur with the screen savers that come with Windows Vista?

   Download and install the latest video card driver.

  a. visit the system manufacturer's Web site, download the Vista compatible video card driver and install it.
  b. restart the computer so that the changes take effect after the driver installation.

  http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See Run the DirectX Diagnostic tool

  Now for the question of the service pack:

  How you try to install the service pack?

  You can check these links:

  Learn how to install Windows Vista Service Pack 1 (SP1)

  What's included in Windows Vista Service Pack 2 (SP2)

  How to obtain the latest Windows Vista service pack

  It will be useful.

  Please return to the State of the question.

• Problem with network controller / wireless driver

  Hello, I have problems with my computer network controller. I can't connet to the Internet wireless or wired. In addition, two of my USB Ports do not work.

  My system is HP Pavilion G4 - 2235dx

  A6 - 4400M with Radeon AMD

  Windows 7 Professional

  The hardware ID

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C

  PCI\VEN_168C & DEV_0032 & CC_028000

  PCI\VEN_168C & DEV_0032 & CC_0280

  There are other issues such as:

  PCI device

  SM Bus controller

  USB controller

  When you open Device Manager and every thing under "Other devices" are not available, you will get the real picture. Please I need your help to make this work again.

  Thank you.                       David

  Hi, David:

  Here are links to the drivers you need:

  1. first install the amd chipset driver and restart. You only want to use the first file on the Web page.

  This will install the smbus and usb3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  2. wireless card driver is the following:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  3 PCI device is the following:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103762-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

• X230T USB 3 port sleep problem with external Blu - Ray drive

  Hi all

  I bought a new LG external blu - ray drive and I have problems with it sleeps very quickly.  It is recognized in Windows 7 and will be available for a short period of time after I turn it on, but if I don't use it for 30 seconds, it's in a kind of fashion 'sleep'.  It works perfectly on the single WE port 2.0 on the X230T so there must be something with the 3.0 port.  The drive is powered by an AC adapter and USB 3.0 cable included one.

  I tried to disable all the properties sleeping USB in all areas of power management and power options in Windows.  Also enabled and disabled USB hub root energy saving.  Also, I went through the BIOS and threw the USB options as well and can't find why it is go to sleep so quickly.  I have the latest firmware on the drive, as well as the latest drivers Lenovo USB 3.0 for the X230T.

  I guess I'm out of luck at this point because I think I've tried all possible solutions?

  Thank you.

  Hi again,

  I have looked on the specs and do not see why this problem should occur. I would make sure that the BIOS is updated, if you have not already. The latest BIOS for your machine is 2.03 and came out a month ago. This update, you can find here. And if this does not work, can you check and publish what are the settings in your BIOS Config > USB Configuration?

  Best,

  Adam