How can I add a VM on my system if it is not in the default hard drive

Similar Questions

• How can I transfer my photos to iCloud by using a MacBook Air to an external hard drive?  After downloading, my iCloud pictures can be deleted to free space on my iPhone 6 s?

  How can I transfer my photos to iCloud by using a MacBook Air to an external hard drive?  After downloading, my iCloud pictures can be deleted to free space on my iPhone 6 s?

  Archive or make copies of your iCloud - Apple Support data

  http://www.IMore.com/how-backup-your-icloud-photo-library

• files and folders: How can I load all my files and folders to my new account of my external hard drive?

  Who can help, I just put a new account on my computer and deleted the old account. I backed up the old files on my external hard drive. I want to know is how can I load all my files and folders to my new account of my external hard drive? I thank you for your time and knowledge have a very nice evening, Shawn

  Because it's a new account (even if with the same name), the restore procedure is unable to put files and folders in the same place, they came (because this place technically no longer - if yes, then the process is done and the transfer is complete). It can create a set of separate files (maybe even under a new user name, if it has been stored in this way).  If so, all you need to do is copy the data as you would copy any other files and folders (not the main files of the user profile themselves but the data in them) on the new files in your user account and who will take care of the transfer. Here is more information about the restore procedure which may help you in the process.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office.

  share external hard drive

  I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office. I want to be able to back up my laptop hard disk external.  Advice please.

  geraintjo

  I do not use homegroups, but 'true' to share, so I don't know how this is supposed to work with homegroups. But usually he should share a drive or folder, first before you can access it from another machine. (for example, click on the drive/folder properties and go to the sharing tab)

• How can I add an administrator if there is no designated as administrator on the PC?

  My son deleted my administrator account and changed me for limited use of the user. Now there is no Administor and I can't load any program or to any administrative action. Is it possible to add an administrator account without going through an administrator. ?  How can I add an administrator if there is no designated?

  Simply log in using the built-in Administrator account (it cannot be deleted) using start > run > 'control userpasswords2' to change the desired accounts.

  By design, the only way to connect to the administrator account on Windows XP Home is to restart in Mode without failure.  For WinXP Pro, by pressing CTRL + ALT + DELETE twice at the Welcome screen will produce the standard login dialog box.  Unless the owner deliberately value password to the administrator via the Management Console (_not_ Control Panel), it is probably still a Virgin.  WinXP Pro ask the installer to set the administrator password during installation, but WinXP Home does not work.

  Failing, Linux-based password cracking utility abound on the Internet, available for free to anyone who can use Google.

• Can not see the external hard drive to my computer only in devices & Printers I tried many patches & need help please

  I do not see my external hard drive in my computer but I can't in my devices and printers.  I too see the drive in disk management.  There is a lot of data on my hard drive that I need to save. It says that I have to initialize so the computer sees the drive but it clears my data. How to recover data? The drive works and makes no noise. Help, please. I uninstalled the RPG player

  and reinstalled. I've also updated the driver and I still don't see the drive in my computer.

  Hello

  Welcome to the Microsoft community.

  I understand that you have a problem with finding printers and external hard drives in the computer. We apologize for the unhandiness caused to you and appreciate your efforts in trying to solve the problem.

  To help you better I would like to know the details.

  1. What is the brand and model of the computer?
  2. You did changes to the computer before the show?
  3. Have you tried to connect the same external hard drive on another computer?

  I ask you to run the hardware and devices Troubleshooter and check if the problem persists. It is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  I ask you to install optional Windows, including updates updates and check if you are facing the issue.

  Reference http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_devices/how-to-install-and-update-drivers-in-windows-10/a97bbbd1-9973-4d66-9a5b-291300006293

  Keep us updated on the issue to help you better.

• can not get the new hard drive to work in the Pavilion ze4805us laptop

  have an HP pavilion ze4805us laptop which had a total hard drive failure... recovery disks were lost in a fire... replaced the hard drive with a Western Digital 250 GB drive... computer recognizes the drive, but with only 137 GB... impossible to obtain the Windows Millennium disk to install... I have it get the PXE - E61 error code... have looked for answers and tried a few suggestions to fix the error code, but no luck so far... would like to throw this laptop and runs again, it was so nice all in operation. Can someone help me with this? Thanks to all in advance... rrcar6

  At the level of the BIOS, HARD drive should show the full capacity regardless of the distribution, but it will be limited based on what the current logical block installed the BIOS supports.  For example, the 250 GB HDD Needs LBA 48 bit to be recognized by the BIOS in its entirety.  Western Digital only provides downloads of software and support going back to Windows XP.  Windows Millennium Edition is not able to recognize the full capacity of the drive.  Finding drivers compatible with Windows ME is perhaps another challenge that XP uses a different architecture than Windows ME done.

  It seems that this laptop is the same time that the books mentioned in this thread.  Response from JackShack gives the best explanation as to why he shows quite different in the BIOS.  It has been many years, but I do not remember that the capacity of the HARD disk had exceeded what the BIOS at the time supported resulting in the 137 GB limit displayed in the BIOS.  This section of Western Digital shows that this problem is related to the operating system or BIOS supporting however, this should not prevent Windows to install correctly.

  I'm sure it's already done, as it was not a new BIOS since 2004, but guarantee the newest BIOS is installed.  Logical block address 48 bits, necessary for the larger disks (larger for the time) was released in 2003.  The 2004 related BIOS earlier than probably took supported LBA.  What is the current version of BIOS?

  What is the exact message that you get when you try to install Windows Millennium Edition?

• How can I add a new corresponding mobile page after I have already created the sites Office & mobile?

  I have a site very large desk and a smaller mobile version. Now, I need to add pages to version more mobiles that are linked and redirected the parent office. I don't see a way to get where you will consider 'related pages '. Note: I is NOT need to create a mobile version of my site. I already have a mobile version. Now, I need to add new mobile pages that are matched with the office pages. Thanks for any help!

  Unfortunately, there is no way where desktop content page could get copied to the mobile pages, you must do it manually by dragging the content of mobile pages and resize them.

  Thank you

  Sanjit

• How can I get WMP to find all my songs that are stored on an external hard drive?

  I bought an external hard drive to store music for my product and WMP adds only about 30% of the songs to the Player library.  Some are wma and some are in mp3 format (added to the library and which must still be added).  I tried to uncheck Read-only after reading some responses online, but who did not stick and nothing changed.  How can I get WMP to find all my songs?

  I couldn't change them to read-only.  Fortunately after the computer restarts several times it work itself.

  Thanks for all the tips!

• Lightroom does not recognize the external hard drive used with your old computer.  gives it a new drive letter.  How can I do understand that it is the same as that?

  Bought a new computer.  Lightroom cannot find the photos that have been saved on external hard drive because lightroom gave a different drive letter.  How (H) instead of (E).  How can I merge them without doing a full import?

  In Windows, you can change the drive letter e (Besides, isn't Lightroom, in doing so, is Windows)

  Change, add, or remove a drive letter - Windows help

• How can I delete old windows files that seem to occupy a large part of my hard drive. I use Vista Home. I have reininstalled OS but only saved the files I never cleaned up old windows.

  I use an older Dell that was handed to them. There are several problems with it and I finally reinstalled winows vista home and worked my way through the updates. Now, the system works well for me but the hard disk is almost full. When I look at the pie it shows post-colonial windows most of the space. I think I should remove the old windows files. Any help? Thank you.

  Hello

  How to restore your personal files from the windows.old folder after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  and here's how to remove

  http://www.Vistax64.com/tutorials/240390-Windows-old-folder-delete.html

• How can I fix this "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." Error if please restart and try again. » ?

  I'm trying to install Microsoft FreeLancer on Windows 7 64 bit Home Premium edition (according to WinVer: Version 6.1, build 6701, Service Pack 1).

  After inserting the DVD in the drive and run "Setup.exe", I am invited by the UAC to elevate permissions - who I am agreement - then the following error message appears: "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." If please restart and try again. »

  The only valid technote, I found the issue was http://support.microsoft.com/kb/258496. The below is the list of the things that I tried after reading this technote - but no avail.

  • Of course, I tried to restart.
  • I checked the DVD is in good condition, even with regard to the attempts to install from the disc to a friend and even went up to compare the MD5 of all files on two DVDs, the checksums match.
  • I tried using the compatibility mode for XP, although according to the report of another user on the statements of the Windows Compatibility Center that this should not be necessary.
  • I ran a full "chkdsk" (i.e. one scheduled for after a reboot, rebooted) and chkdsk reported no error.
  • I deleted all files "di - use ' %TEMP%, immediately after the restart and before you run setup.exe.
  • I've looked at this the EMET tool had an exemption for 'setup.exe' and my tool anti-virus was disabled before installation.

  Everything I try seems to have no effect on the resolution of this problem.

  Can anyone suggest any possible causes of--and, ideally, solutions to-this issue?

  Kind regards

  Alex.

  ... "Step 1: perform the clean boot to verify if it's a software conflict matter. '...

  -Tried but not given to impact.

  ... "Step 2: System File Checker tool"...

  -Tried but not given to impact.

  ... "I would have you check the same DVD on another computer and check if it works. '...

  -The only other machine that I use Ubuntu. My other half uses only his Mac.

  I managed to work around this problem by using the following workaround solution:

  I installed Freelancer CD on a Windows XP virtual machine running in VMWare Workstation. I then moved the installation directory (C:\Program Files\FreeLancer) off the coast of the virtual machine on my Windows 7 computer in (C:\Program Files (x 86) \FreeLancer).

  The game seems to work fine as long as it is run with administrative privileges (that is, the freelancer.exe running). Without administrator rights, the games is never recorded. With them, they are registered under "C:\Program Files (x 86) \FreeLancer\EXE\Accts\SinglePlayer" successfully.

• How can I add music to my library iCloud music which was not purchased on itunes?

  My family have a shared iTunes library on an iMac which consists of songs taken from disks and purchased songs on several iTunes accounts. We have to take all the music that we love him and place it on our separate devices. Recently, we have subscribed to a family membership of apple's music. I would like to know how I can take a few pieces of our iTunes library and put them in my music library iCloud, as well as Apple's music recorded music, and then share my library of music iCloud for iphone and ipad. I don't want music saved on my iPad air (as it's only 16 GB), as in the cloud to listen only to the wifi and I want to download on my iPhone 5 s (32 GB). Both devices are running the latest OS. Any help and advice would be great.

  To share your music you have not bought on iTunes to iCloud and other devices, you must have a subscription to Match iTunes (I think they call now iCloud music library).

• How can I add contacts to a mailing list if they do not have an email address?

  I try to add a contact to a mailing list and the contact has an e-mail address. In the mailing list, it says "type email addresses to add to the mailing list." I do a fake e-mail to those contacts who do not?

  If you insist on using a mailing list for something it is not designed for, I guess the answer is Yes.

  Address books are contacts and provide contacts without email addresses. As stated previously, the mailing lists are to create groups for sending group emails. For a contact to be on a mailing list they must exist in the address book in which you create the list.

  A better solution if you try to create categories of contacts is to create a new address book.

• How can I add a straight line in a State of working capital under the heading of menu nav?

  Can we do this in Adobe Muse? I want to include a line that appears in the menu item, under the title of the menu, a mouse is reversed or tapped a finger on the item on a mobile device. For example the House with a line just below that will appear when I change the rollover State. I don't want to underscore. I mean a line of a few pixels to the bottom of a menu item name.

  You can do this by adding a line to the bottom of the menu items (remember to separate the four sides). You must do this for all four States - use the same color for the States you want to see the line, otherwise, the text will jump.

  

  David

  Creative muse