How can I assign a 'C' drive to make it bootable?

Similar Questions

• When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, I replaced?

  When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, that I replaced. The letter is now used by another device?

  Open disk management, find the drive using the drive letter you want to use, change the drive letter of this to 'Z', find the new drive, change the drive letter that you want, and then change the drive letter of the drive you have labeled it 'Z' to a drive letter of your taste.

  Jim

• Drive mapping: How can I get my external drive be mapped to F: (as he was once) rather than g: which is what happens when I turn on now.

  How can I get my external drive be mapped to F: (as he was once) rather than g: which is what happens when I turn on now.  I tried to unplug and power, reboot etc.  There is no F: drive connected to the computer.

  Go to start / Control Panel / administrative tools / computer management / "disk management and select external reader by clicking on it and then right-click on it and select change drive letter and paths."  It should show the letter currently assigned (G I guess).  Click the button change.  To the right will be a drop of drive letters box.  Go ahead and select F and click on OK.  That should do it. If F is not available, then it is used by the system for something else.  Check disk management to see if you can find it.  If it is not, and is not available in the list, I'm afraid, you will not be able to change until find you what is using drive letter F and remove it, or change it to something else.

  I hope this helps.  If this isn't the case, after return and we will try to understand what is using F or why it is not available.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I assign a browser to a specific office in El Capitan?

  How can I assign a browser to a specific office in El Capitan?

  You can change your default browser by following these steps:

  1 from the Apple menu, choose System Preferences, then click general.

  2 click the 'Default web browser' dropdown and choose a web browser, such as Safari.

• How can I clean my hard drive

  How can I clean my hard drive

  'Clean up '?  Do you mean delete?  If so, follow the instructions to clear it down here:

  What to do before you sell or give away your Mac - Apple Support

  'Clean up' means to get rid of some extra too much room?  See 'Release of disk space' here:

  OS x: what is 'other' space about this Mac? -Apple Support

• iMac 10.4 - utility disk erasing option is grayed out. How can I erase my hard drive?

  Hello

  I have an iMac 10.4 - utility option in the disk, the delete option is greyed out. How can I erase my hard drive?

  Hi GJuss,

  What is your boot volume? If so, you will not be able to.

  It is an external hard drive?

  Kind regards

  BleverCastard

• How can I start my Flash DRIVE Toshiba Satellite m40x?

  Hello.

  How can I start my Flash DRIVE Toshiba Satellite m40x?
  In my BIOS is not be option - boot from usb.

  Help, please.

  Hello

  As far as I know is not possible. Sorry but there is nothing to do.

  Good bye

• How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  Have you looked at the site of Canon?

• How can I get a boot drive for windows vista

  How can I get a boot drive for windows vista

  Hello

  Here's how to do a startup, vista etc disc repair

  It is NOT a reinstall drive

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to reinstall Vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Disk management: How can I extend my C: drive

  I want to thank my c: drive.  I guess I made the mistake of creating multiple partitions for music:, films: and pictures:.  Should have only 1 car and several folders, right.  Now, how can I extend my c: drive to the full capacity of my hard disk?

  Hello

  Remember to BACKUP! multiples by using several methods.

  How to resize a partition on Windows Vista
  http://www.vistarewired.com/2007/02/16/how-to-resize-a-partition-in-Windows-Vista
  How to remove and extend a Partition with Vista disk management
  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  How to remove a partition on your hard drive?
  http://wiki.answers.com/Q/How_do_you_remove_a_partition_on_your_hard_drive

  Change or resize Partition (NTFS, FAT or FAT32) size in Windows Vista
  http://www.mydigitallife.info/2006/11/27/change-or-resize-partition-NTFS-FAT-or-FAT32-size-in-Windows-Vista/

  How to resize, extend, reduce, remove, Merge Partitions in Vista.
  http://www.WinVistaClub.com/T11.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How can I re install a Driver for my cam ASUS USB 2. 01.3 M UVC in Vista?

  Dear all, please let me know how can I re install a Driver for my cam ASUS USB 2. 01.3 M UVC, using Windows VISTA

  * original title - re install usb 2.01.3M UVC for asus computer webcam *.

  Hi mounthalakongvongsa,

  What is the number of model of your laptop or desktop?

  You can provide the model number on the site below and search for the drivers.

  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

• Installing Windows said "we have found no disk drives. How can I get a storage driver?

  My hard drives of computers were completely destroyed by overhead sprinklers during a fire. Installing Windows said "we have found no disk drives. How can I get a storage driver? I can't go online until I have install windows. Thank you

  Hello

  So it does not start from the disc, but when you get to the part where it asks me to choose a disk to install Windows, you do not see something here, is that correct? Go to the menu of the Bios (tap button "F2" at startup to access the Bios), then Advanced and check what you show for the SATA/operating Mode option.

• How can I increase space C drive without formatting 7 window

  How can I increase space C drive without formatting 7 window

  Try this.

  http://blog.EASEUS.com/partition-manager/change-partition-size-in-Windows-7-without-losing-data-328.html

  I hope this helps.

• I have 3 radio button options to choose, but I want only a certain one for calculating sales tax. How can I assign a calculation to an option button?

  I have 3 radio button options to choose, but I want only a certain one for calculating sales tax. How can I assign a calculation to an option button?

  Ok. Let's say the name of the radio button group is "Radio1", the value of exports in this field is '3', the name of the subtotal is "Subtotal" and tax rate is 16%. You can use this code as the custom calculation of the tax field script:

  Event.Value = (this.getField("Radio1").valueAsString == "3")? Number (this.getField("Subtotal").valueAsString) * 0.16: 0;

• How can I assign access to 950 members?

  How can I assign access to 950 members of the dimensions to different groups of users by using a method not GUI?

  I'm working on Hyperion Planning 11.1.2.3 and tried to attribute access for 950 members in a dimension for different groups of users.

  I tried the method of GUI (size section-> assign access->...) after 190 members I abandoned it and thought there must be a better way.

  So here's my question... y at - it another way-(prompt orders, LCM, third party utility...) - I can assign access to 950 members user group?

  Use ImportSecurity.cmd

  Import access permissions

  -Doug