Stamina, my Xperia mode
Hello
I have a M4 Aqua.
I have the endurance and my Experia (phone tracking) mode together.
Because stamina mode disables network connections when the screen is off, My Experia mode will not work and the phone cannot be located if lost.
Under the Stamina mode menu, there is an option to allow certain applications to stay connected. I don't see my Experia in this list. Is there anyway to get my Experia works when Stamina mode?
Thank you.
@billford Are you running 5.1.1? If you add applications, you should see all the other tab. My xperia is available.
Tags: Sony Phones
Similar Questions
-
Xperia Z2: Stamina mode does not aparently
Hello
Endurance mode does not work on my phone aparently. I have try all configurations, but the sotware disable wifi and mobile data operator when I block, or turn off the camera screen. I continue to receive information from applications and I did not any exception on the configuration of the endurance. Any idea to solve this problem?
Hello.. To do this
Go to settings
Apps-> all-> the controller in eco mode
And empty the cache and data... Before you click on stop and restart your phone... It should work -
Whenever I put on her stamina mode does not work and is not disable the stream please notify
If the data is not disabled after 15 minutes (after endurance comes into play), you should try this: first of all, make sure it is off, then go to settings-apps-all, do scroll down to stamina. Force shutdown, and erase the data. Restart your device.
Also, see this:
-
With each load using the left battery is exhausted. When I used it first, it says 6 days left endurance mode but now even on stamina mode only has 19 hours of battery life.
This Sony Xperia m4 aqua is only 3 weeks. Pls reply as soon as POSSIBLE.
Stamina mode will estimate the battery life on your usage of the latter model. So it means that the battery will last for 19 hours on your normal use. If you change the model, the estimate may increase or decrease.
-
How can I activate mode "Developer" on xperia Tablet z?
Hi all
I own a Tablet new xperia z.
One thing that I was like is that default Chrome to the display of the Desktop version of a web page by default (rather than the mobile version of a site).
I found information online explaining how to proceed:
http://www.guidingtech.com/16169/desktop-mode-websites-chrome-Android-permanently/
I wanted to perform the steps described in the "for users without Root access", because I do not want at the root of my brand new camera.
It comes to getting the work of adb command. I could get this tool via a "mini-sdk" provided on this site:
http://androidforums.com/FAQs/443072-ADB-guide-updated-2013-05-21-a.html
When I run the command adb suggested, he noted:
* demon does not. from now on port 5037 *.
* the daemon started successfully *.
error: device not foundI then read this page about the adb via the "usb debugging": setting Protocol
http://eSupport.Sony.com/info/878/us/en/
However, when I try to visit the "USB debugging" on my camera of xperia z equivalent setting, all settings in the 'Developer Options' section are disabled.
I then read this web page describing how to enable "developer mode":
He suggested going to 'away'and clicking on the 'Number of Build' seven times to activate this setting...
But when I try this, it doesn't work on my device.
I've been Googling for awhile to see if the sony devices have an unique alternative to do, so far without success.
Then you would be able to tell me how I can configure the developer mode on my sony xperia z Tablet?
Thanks for any help.
Gurce
H RyanC,
Thanks for the link. Unfortunately, the forums are currently read-only, so had the chance to ask the Q it. I tried the the form "contact us" a few days ago, no answer yet.
But fortunately, I was able to fall on the answer by myself. Will write the answer here, for the benefit of third parties who need to understand this point and to throw off by all the dishes google obfuscation upward:
- Come on in "settings > developer Options"
- Notice in the upper right of the screen there is a switch small horizontal slider
(it is in the 'Settings' title aligned to the right bar) - The slider is currently set to the left, then drag it to the correct position
- A popup appears saying:
"Authorize the parameters of development?
These settings are only for development purposes. They can cause your device and applications on it to break or misbehave. - Click on 'OK'.
- You can then enable options such as "USB debugging" in this menu
I'm a happy chappy now
-
alignment of the text in landscape mode domestic xperia
I installed xperia home 8.1.A.0.8 (later for me, not preinstalled with lollipop 5.1.1 so far no update of 8.0.A.1.2) pitcher my Z3, but mode landscape, there is problem with the alignment of text (or envelope). text (app name) is covered by another icon of app´s.
The cause for the missing items, sometimes at a Xperia has been found and it will be corrected in a future update to the phone. Thank you for providing us with the newspapers and the video!
Is the alignment of the text always like this or is it when the search and menu items are missing?
-
Unable to start "Xperia mini pro sk17i" in recovery for the CM10 installation mode
I want to install CM10 on xperia mini pro sk17i.
I unlocked the bootloader and also rooted the phone.
Now I want to start the phone in recovery mode to install CM10, but I can't do it.
I tried all combinations of keys to do this, but still I am anable to start it in recovery mode.
Also tried 'App quick start' and Rom manager, but yet, I am unable to start it in recovery mode.
Please help me!
Have you even installed the recovery?
Download X-parts since google play, open this app > go to the Setup tab > install MCG.
There are tutorials on how to install CM10 on XDA. It would b better if you go through them.
-
Data connection keeps disappearing in Stamina mode
I'm in the United Kingdom on the three network. I use Stamina mode with extended use enabled to save energy, but I see a consistent question when, after an hour or two, the phone completely loses his mobile data connection and does not restore without having to reboot. This makes Stamina mode completely useless because is not reconnected when the screen is turned on.
The signal on the phone indicator shows no symbol 'H' when this happens, even a few-> status means HSPA is present but are disconnected mobile data.
I have the latest firmware installed.
Try resetting the endurance like this: first of all turn off, after which go to controller settings-applications-all-eco mode, forcing clear data and stops. Restart your device and check again.
-
Xperia m4 aqua supports fast charge or 2.0 fast charge mode
Xperia m4 aqua supports fast charge or 2.0 fast charge mode
Sony Xperia devices that take in charge of Qualcomm Quick Charge 2.0
Xperia Z5
Compact Xperia Z5
Xperia Z5 PremiumXperia Z3 / Z4 (only model with single SIM)
Xperia Z4 TabletXperia Z3 (only Japanese variants SO - 01 G, SOL26 and 401SO)
Compact Xperia Z3
Xperia compressed Z3 CompactXperia Z2 (only Japanese variant SO - 03F)
Xperia Z2 Tablet -
Endomondo prevents STAMINA mode
Maybe this question was asked before:
I have this app to track I want to use to track my long hikes in the mountains. The phone is in airplane mode to prevent it from constantly in search for the cell towers. I have the ENDURANCE mode and also added this app (Endomondo) to the white list in the settings of the ENDURANCE. The application uses the GPS + WiFi to get the location.
However, the phone keeps complaining that this application prevents it to STAMINA mode. I am running the latest FW.
How can this be repaired?
Prevent certain applications, depending on how they work, ENDURANCE and work when this happens, you will get this message with information about the app which are the cause.
I don't know the exact reason but on our site for developers, our developer team has posted some tips for application developers on how to reduce the battery consumption and make applications more optimised for ENDURANCE: http://developer.sonymobile.com/2013/04/04/5-coding-tips-to-make-your-app-power-efficient-and-optimi...
-
Xperia Z3 double, lost flight mode icon!
When I switch between users, the primary user to another user on my phone, the flight mode icon is lost expansion notification bar (or settings Rapids bar, next to the WiFi and Bluetooth icon).
I need to restart the device to retrieve.
My device: double Z3 Xperia, Android Lollipop 5.1.1.In fact, after the switch to another account.
-
Mobile data in stamina mode problem
Hi all
Mobile data continue to work, when I chose in endurance mode. It works even if extended stanby was chosen. mobile data won't stay out of this mode. How can I solve this problem?
Not: Active applications in stanby is empty.
My problem has been resolved: mobile data was closed in 15 minutes after I closed keylock
Stamina mode will kick after 15 minutes. Mobile data remain even after that time? It should allow when you wake up to the device.
-
Controller Eco Mode = Mode Stamina?
Hi guys! I have a question, at KitKat we controller in Eco Mode, but since the update of the lollipop, it is absent in the apps, but I noticed the app in Stamina mode? And can I restart Mode endurance through this application then?
@NirmalSitaldin98 Yes, on some markets, it is still controller in eco mode, but as far as I know, it's the stamina now.
-
Priority to the Xperia Z3 double 5.0.2 mode
Please, can someone explain to me how a / m mode works?
What I need: muted except the alarm clock tone.
How to configure the priority mode:
-When the calls and notifications arrive - allow only interruptions of priority
-events and reminders OFF
-call OFF
-OFF messages
What I get in priority mode:
the call rings at full breath (shouldn't she be mute?) and dismissing the appeal in priority mode (the Star turns off).
I am confused because I tried all possible combinations, and I have not found a solution, please help.
Of course, I do this all the time, I fall asleep and but my phone silent, alarms ring through. If this does not work with you, try to clear the cache of applications 'Audio Settings' and 'Clock', and then restart your phone. Set an alarm and go silent.
-
Xperia Z5c enter a completely silent mode after upgrade of Marshmallow
I just upgraded my Z5c Marshmallow and my phone goes now "completely calm" mode in itself just sitting there between 22:00 and 22:30 at some stage. I don't have that one Smart Connect event set to 23:00 disable mobile data, so it isn't that.
Anyone have any ideas on how to solve this problem, because I'm supposed to be on call and I really need to be able to get phone calls at night.Hi gembrook.
Welcome to the community,
Sorry to hear that, I think can happen here is a setting to do not disturb, however, it must not have turned on its own. Take a look in the next section.
Apps > sounds & Notifications > do not disturb > rules > check rules by selecting them and turn them off when they are on.
Let us know how you go.
Maybe you are looking for
-
Satellite L500 - ERROR = copy of splitpart or Canadian Red Cross failed!
Well, I tried to reinstall vista with the cd/dvd recovery I ordered. I tried both versions 32 and 64 bits on disk, but as soon as it reaches a certain point on disc2 (copy some .swm files 7/9), the error "copy of splitpart or Canadian Red Cross faile
-
Greetings, I like to see the photos of my friends have downloaded but sometimes would see rather just my own gallery when I open the gallery application. Y at - it's not a setting somewhere, maybe I forgot, that allows you to display only your galler
-
HP DV6 7300-EX ENVY: can I upgrade my NIVDIA GE FORCE GT 635 M card?
and also I can pass the processor or any other component in my notebook?
-
I bought a Dell Precision T3400 of Dell Financial Services and it came with Vista Business installed. I installed a new hard drive and installed Vista in a Virtualbox VM by using the recovery disk that came with the computer, and the product key doe
-
(KB972145) Recommended (KB2563894) IMPORTANT (KB968930) recommended and updated for (KB968930) everything has failed. I tried for days now to download these updates, but I did not, even in SafeMode with networking, I can't get Windows update to try t