How can I associate and e-mail with the snipping tool program so that I can e mail what I snip?

Similar Questions

• Re: Can't do and blue screen with the recovery tool

  Hello

  After I start my computer, leaving the office, but I can't do anything, everything freezes!

  I tried the recovery (with F8) tool and it starts, but after a while the bluescreen apears.

  Can someone tell me what is the problem?

  Thank you

  Hey,.

  What laptop, you have exactly and blue screen appears exactly?

  If disk HARD recovery doesn't work you should try the Toshiba Recovery disk recovery facility.

• Unable to connect to the internet and have problems with the help of program network Toshiba

  Original title: I can't go on the internet?

  I try to go online to check my bank account and net work of toshiba program will not cone upward on my screen.i have a blank page.

  Hi Alice,.

   

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You are unable to connect to internet and unable to use a Toshiba network program.

  1. what browser do you use?

  2 are you able to open other sites?

  3. Once you get a white page?

  4. do you get error messages when you try to open the site to the Bank?

  5 did you do changes on the computer before the show?

  6. who is the program of Toshiba network you're talking about?

  To work the issue with cannot connect to the internet:

  Method 1:

  See the site:

  The problems of Internet connection

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-Internet-connection-problems

  Note: Apart from using the Internet connectivity evaluation tool, all the other steps are applicable to Windows 7 as well.

  To work the issue with Toshiba program:

  Method 2:

   

  Reinstall the boot program:

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Step 2: Uninstall the program

   

  See the site:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 3: Install the program

   

  If the problem persists, then you try to get help on the Toshiba forums site:

  http://forums.Toshiba.com/

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

   

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I was deleting files and delete something that now I can't play my music files... and my Youtube videos are no longer in sync with the songs. HD playler / Flash...? What I've done. ? How do I get it back

  I was deleting files and delete something that now I can't play my music files... and my Youtube videos are no longer in sync with the songs.  HD playler / Flash...? What I've done. ?  How do I get it back

  Hello

  As you are not sure of what you have removed for cause of your problems, I suggest that do you a system restore to a date before you start deleting these files, and then start carefully again, before to remove any file of dual control.

  How to make a XP system restore:

  http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-XP.htm

  See you soon.

• How can I get genuine copy of vista Home premium. can I install it from the internet and enable it with the key provided at the back of my laptop?

  I recently bought a laptop (hp dv 2000) 2nd hand. It was delivered to me with windows 7 installed, but I want my vista that was installed at the plant how can I get the authentic copy. can I install vista Home premium on the internet and enable it with the key provided in the back of my laptop, it will become a genuine copy of vista?

  Name: Ketan Kumar

  email ID:-* address email is removed from the privacy *, * address email is removed from the privacy *.

  Phone: -.

  model:-HP pavilion dv2000 (AMD)

  version of the Vista Edition operating system family premium preinstalled

  Hello

  There is no vista download for free and legally on the net

  Here are the different ways to reinstall Vista

  Contact HP and ask them to send you in recovery vista disc to reinstall the operating system back as it was when new

  they do it for a nominal cost of $

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  ____________________________________________________________

  Solve a common problem of recovery with HP machines.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.

  __________________________________________________________

  or borrow a vista microsoft dvd; not an Acer, Dell etc recovery disk

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Hi - I am trying to draw an irregular shape (series of straight lines) and fill it with the color... How can I do this?

  I need to draw a shape irregular, closed, which is a series of joined lines and fill it with the color, etc., I can only see square, polygon, etc...

  Any suggestions?

  You can set the polygon tool to 3 sides, or use the pen tool.

• In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). I can't understand how to disable.

  In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). Whenever I try to use a tool, a blue box appears around the line and I have to double click on it to handle, which opens just this line in a screen finery semi where all other objects are semi-gris in the background. I can handle this line in this screen, but nothing else at this point I could do 5 minutes ago. For example, I can no longer reach the 2 lines drawn by the tool online together. For some reason, it started randomly (probably due to an accidental combination) and I just can't put it to what it was. I inserted a video showing if all goes well I mean. Any help would be appreciated.

  Object drawing mode. Simply disable it in the tools Panel, or by using the default keyboard shortcut, which is J.

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy _ @ _. ___

  How can I get a copy of the cd that will work with your old software. I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy to * address email is removed from the privacy *

  Hi Oscar,.

  Thanks for the post.

  It seems you are trying to download the application printer and scanner. Please answer the following questions, which will help us to guide you in the right direction.

  1. What is the brand and model of the printer?

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Send us more information to help you better, we will be happy to help you!

• Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities of free ware

  Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities free ware. Also, windows Explorer does not display dimension and other video related information for the file. Y at - it a tool that can indicate what exactly is the problem with the file.

  Ritu

  Hello

  1. you get any error message?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/279242

• I forgot to backup Outlook Express! However, the .dbx files are all in the data folder of Application that I have back up! How can I see what is in them to import to my chosen e-mail program?

  Original title: .dbx files

  I've updated computer laptop of my client from Windows XP to 7.  I forgot to backup Outlook Express!  However, the .dbx files are all in the data folder of Application that I have back up!  How can I see what is in them to import to my chosen e-mail program?

  This is how you would normally import into Windows Live Mail. If all goes well it will give you enough of a jump start.
   
   
   
  Copy the * ENTIRE * OE message store folder to a flash drive. (Folders.dbx must be included). Place it on the desktop or another location on the computer using WLMail.
   
  
  WLMail 2011/2012: folder button. Import Messages. Microsoft Outlook Express 6, and the point where it was saved.
   
   
  
   
   
   
   
   
   
   
   

• How can you know what drivers and programs are essential and those that can be deleted without harming my computer?

  Original title: completely clueless

  I'm totally clueless when it comes to computers, but I try very hard to learn. I am using the help section a LOT, but I can't seem to find an answer to the only thing that makes me crazy. How can you know what drivers and programs are essential and those that can be deleted without harming my computer? I have a very basic net accountant I learn on before I screw up a portable more expensive and I do a cleaning on my C and D drives to improve performance because it runs so slow but it tells me I have the drivers who slow down Windows. I would greatky appreciate any assistance from someone who has the patience of a saint and is willing to take the time to explain it to me, in terms laymans. Thanks in advance

  Drivers: you should know what you bought (in your machine) and what * you * want out of it.  If you want stability and things work properly - let alone the drivers.  If you want more performance check (and other games) in the drivers of motherboard chipset and video network from the manufacturers Web site... For more stability stick with the OEM website (HP, Dell, Lenovo - the assembler of the whole machine) and slightly more performance/push the limits (even if they want to work too - so still some stability) - access to websites of its components manufacturer.

  With regard to the programs: you can decide what you use and do not use.  If you are not sure, look it up (Google) or ask.

• How to enable vertical and horizontal scrolling with sculpt Touch Mouse (W7-64). When I activate horizontal disables vertical scrolling to scroll.

  Load the IntelliPoint software that is more recent, although she did not recover that (!). Scrolling works when you use the Synaptics Touchpad.

  When I turn on all the other functions in the IntelliPoint vertical scrolling is disabled.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
  The description of the question, I understand that you can not use horizontal and vertical scrolling with sculpt the touch mouse.
  Let me go ahead and help you with the issue.
   
  As you have been told that the IntelliPoint software is updated, but sometimes Sculpt mouse drivers may be outdated which causes this problem.
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  I suggest for the link and follow the steps in the article:
  Install IntelliPoint software and the mouse
  http://support.Microsoft.com/kb/258785#top
   
  Method 2:
  Download and install the drivers from the link:
  http://www.Microsoft.com/hardware/en-in/d/sculpt-touch-mouse
   
  See also:
  http://www.Microsoft.com/hardware/en-in/help/support/how-to/mouse/use-sculpt-touch-mouse
   
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Hello, how can I choose what image the film will show before you press play and the movie starts?

  Hello, how can I choose what image the film will show before you press play and the movie starts?

  You can not.  At least not with Adobe tools.

• I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

  I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

  You can just copy/paste the enchilada itself on another page, pretty easy!

  If you want to reuse more often, you can open the library or libraries CC , to store and later hanging out once again. Note: for the creation of an article in the 'old' library, you must select the element on the page and click on the new icon in the " library " window To create an element of CC libraries , you can simply drag something in and out of the window libraries CC .