How can I automate the process of replacing these. PNG in my art?

Similar Questions

• How can I use the AppleCare with replacements USA helmet in Israel?

  How can I use an AppleCare with replacements USA headphones for my iphone in Israel 6plus? Am I covered overseas?

  Technically, no. The warranty is valid only in the country where the phone was originally sold. However, that restriction is based on the differences between the models of phones sold in different countries and the availability of substitutes service. You may very well be able to get the headphones replaced here since there is no difference between those who were included in phones AND those that are included with the phones sold in your country. Make an appointment at the genius bar or take it to your local CENTER and see what they can do for you.

• How can I stop the process using the trigger Disqualification?

  How can I stop and start the process using triggers in Disqualification?  While planning a job, I can not able to see the folder of trigger / trigger name in the tool palette? What kind of file should be placed in the Triggers folder. If you know someone, let me know. If someone has shared an example script which is very useful for me.

  Thanks in advance.

  Malila Chandra.

  It is a common use case.

  You create a job that has a closed Web Services trigger configured before executing the first phase (right click on the stage in the Task Manager, select Configure, you will then see this screen below), with the work or or jobs you need to added stop. This must be configured to be 'blocking', i.e. the rest of the work expected on the triggering comprehensive action.

  

  Work should have a phase which refreshes the data staging, and another phase (or a phase of post trigger) that returns your work in normal real time (using the trigger on the job).

• How can I automate the numbering of pages between different files?

  I use InDesign CS2

  to set up a magazine.  The magazine has about 50-60 ads in it, and each ad is in a separate file, until the magazine is assembled.  There is a guide at the end of the magazine that show the basic information in a format of grid on advertisers in the magazine.  The formatting for the grid is controlled with tab stops to reinvest as advertisers come and go from point to point. I need to add a new column to indicate which page the ad associated with the entry of the grid is on, but I can't find a way to automate it.  The only solution I have found so far is to copy the phone number of the advertiser and to find other bodies in the magazine once it is assembled.

  Is it possible to automate this task, remembering that these ads are all contained in separate files until the magazine is assembled? I find the help topics on the subject of indexes, hyperlinks, bookmarks, etc. to be very confusing and not very useful.

  KeithDale wrote:

  Ads can be placed in InDesign, because I have CS2.  Copy us the ad and paste it into the magazine.  This seems to prevent continuous history references because they must be put in place in the same file. Establish links once the ad is placed in the ad is useless, because it will be broken once the announcement is moved to another file and will take more time than to just do a search for the phone number.  I was oping there will be a way to put in a kind of anchor or something which will be updated automatically when an ad is placed in the magazine.

  It depends on how save you or receive outside ads. These days most advertisers submit PDF, but that you're creating ads to identity card and recording in native format. Personally, I save the original work in .indd for future editing, but export a copy in PDF format and the place to display ads. You can place the PDF file in different numbers as much as you like and there is no risk of leaving anything out when you copy and paste.

  In addition, more information on the guide as only the page numbers there.  I need to have page numbers fit in the existing format to make it work properly (obviously, I'll have to add a column). A table of contents can contain all of these additional data?

  

  It's not what I was picturing, so, no, I don't think that OCD would help a lot.  If you upgrade to CS4 you can probably use cross references that are now a native function. In CS2, you might be able to at least semi-automate paging using the cross-reference of sectors de Jong script: Script for referrals, including a tutorial on how to use it (updated April 10, 2006)

  I can't imagine an easy way to do it in any version, i.e. anything that doesn't require not to add some sort of marker to each announcement and perhaps update the table if things are moving (that part is not onereous - just run the script again). Maybe someone else has another idea.

• How can I delete the process "suggestd?

  My activity monitor shows a process called suggestd that sometimes uses up 99% of my CPU and 1.2 g memory.  I have read several posts on the internet about how to remove the process, but none seems not to work.  Any help would be appreciated.

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Suggestions

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. Log off or restart the computer, and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• How can I run the process steps in the call has a shape in the workspace and view the result

  Hi all

  I hava a process with two steps

  1. one runs the sql query and returns 'invoices me' data, I put these data in the fields in my xfaForm variable
  2. the second is a renderFormPDF witch takes a repository xdp and xfaForm as form data.

  When I run the process in the workbench, I have the right result: the pdf has fields filled by extracting data from sql query.

  but when I call the process of work space it gives me only the model without data.

  I think the process is not yet completed.

  Sorry, you just have a step of user if you wanted to send the form to the user using the interface of the workspace.

  Jasmine

• How can I automate the NTFS permissions?

  Our directory structure has redundancy: C:\Project1, C:\Project2, C:\Project3, etc.
  Under each folder of the project, the subdirectories are similar: C:\ProjectX\Sub1, C:\ProjectX\Sub2, C:\ProjectX\Sub3, etc.

  We would like to allow to assign permissions to subfolders different NTFS, once the main project folder is created. By example, if I create C:\Project1, I want these subfolders to create and with these permissions:

  • C:\Project1\Sub1: Write privs to Group1
  • C:\Project1\Sub2: Reading only privs for group2
  • C:\Project1\Sub3: Write privs to everyone

  I think that this should be done either through Group Policy or script (even if other alternatives would be appreciated). Could someone give us help on how this started? References would also be appreciated.

  Thanks in advance.

  Hello

  The question you asked is best answered in the Technet Forums.

  You can post your questions here:

  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

• How can I remove the case to replace the battery on the 4313w Pavilion

  I need to replace the battery of my HP Pavilion but cannot determine how to remove the case. Need a special tool?

  Hinderschmidt, welcome to the forum.

  Here's a guide that should help you:

  http://support.HP.com/us-en/document/c03004249
  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• How can I automate the reduction in the size of a large batch of PDF files?

  I have to deal with more 40 000 images PDF created with a high value of IPR.  The collection occupies 1.4 TBS of space.

  We experimented with reduced file size and PDF files that are less than 10% of their original size.

  We use Acrobat Pro XI.

  Please also describe if amethod exists so that this transformation performed in the cloud.

  Thanks in advance

  Jack Dunn

  There is a Wizard of Action in Acrobat Pro who can multiple lots

  files in the same way, but from my experience (and the own words of Adobe) is

  not suitable for process files a lot. You should look for

  third-party solutions for that. In addition, it is not available as a cloud

  service and cannot be fully automated (that is to say you need to trigger manually).

• How can I redo the process of uploading photos to iCloud photo library for iPhone?

  I had a lot of trouble to download the originals to iCloud photo library to my phone. It works fine on my Mac. So, I'll just do the download process again. Should I disable iCloud photo library on iPhone, remove all the photos from my camera and then turn it back on so it redownloads all icloud photo library to iPhone? I don't want to accidentally delete photos of iCloud library because it's my backup location. I also have original on Mac as well. Thank you very much for the help.

  Turn off iCloud photo library is perhaps the way to go. But first please tell us a little more on the problems that you encounter.

• How can I automate the creation of a partition from scratch for a large number of hosts?

  I would like to help with the following steps to cerate a partition scratch on all hosts that have no script, then reprot back to me which guests were to have created.

  all my ESXi hosts have a LUN to start with the space, all the boot LUN are named with the same naming that is conveiton "hostname-localstorage.

  I would like to come up with a script that will check each host in a cluster for a partition of scaratch, if it does not create the folder ".locker -hostname" on local storrage and then set the partition scratching to the new location. Then the new report to me, which is already a partition from scratch and those to whom he owed create a parition scratch to so I can plan then a good time to put the hosts with newly created partitions scratch mainenance mode and restart their.

  I glued the manual way to do it below. I'd appreciate any help anyone can give and it will be well appreciated. I try to avoid to do 1000 hours below. Thanks in advance...

  Note: Before you begin, make sure that/tmp/scratch exists. If it does not exist, create it by using the command #mkdir/tmp/scratch.
  1. Open a command prompt where the PowerCLI is installed.
  2. Connecting to host ESXi using the command:
     
     connect-viserver ESXHostnameOrIP
     
     
  3. A list of the data stores accessible by using the ESXi Host command:
     
     Get-Datastore
     
     
  4. Mount a read/write as a PSDrive data store using the command:
     
     New-PSDrive -Name "mounteddatastore" -Root \ -PSProvider VimDatastore -Datastore (Get-Datastore "DatastoreName")
     
     
  5. Access the PSDrive new using the command:
     
     Set-Location mounteddatastore:
     
     
  6. Create a directory named only for the ESXi host using the command:
     
     New-Item "DirectoryName" -ItemType directory
     
     For example:
     
     New-Item ".locker-ESXHostname" -ItemType directory
     
     
  7. Check the current value of the ScratchConfig.ConfiguredScratchLocation configuration with the command option:
     
     Get-VMHostAdvancedConfiguration -Name "ScratchConfig.ConfiguredScratchLocation"
     
     
  8. Change the ScratchConfig.ConfiguredScratchLocation configuration option, specifying the full path to the directory created in step 6, using the command:
     
     Set-VMHostAdvancedConfiguration -Name "ScratchConfig.ConfiguredScratchLocation" -Value "/vmfs/volumes/DatastoreName/DirectoryName"
     
     For example:
     
     Set-VMHostAdvancedConfiguration  -Name "ScratchConfig.ConfiguredScratchLocation" -Value  "/vmfs/volumes/Datastore1/.locker-ESXHostname"


  9. The ESXi host in maintenance mode and restart so that the configuration change to take effect.

  Mike P

  I have something similar to use the script below.

  I think you'll find that your out in there.

  $configName = 'ScratchConfig.ConfiguredScratchLocation'
  
  $mode,$warn = Get-PowerCLIConfiguration | %{$_.DefaultVIServerMode,$_.DisplayDeprecationWarnings}Set-PowerCLIConfiguration -DefaultVIServerMode "Multiple" -DisplayDeprecationWarnings:$false
  
  Get-VMHost | where {$_.ExtensionData.Config.Product.ProductLineId -eq "embeddedEsx"} | %{    Connect-VIServer -Server $_.Name -User root -Password MyPswd    $scratch = (Get-VMHostAdvancedConfiguration -VMHost $_)[$configName]    $tgtName = ".locker-" + $_.Name.Split('.')[0]    if($scratch -notmatch ($tgtName + "$")){        $ds = Get-Datastore -VMHost $_ | where {$_.Name -match "localstorage"}        if($ds){            Set-Location -Path $ds.DatastoreBrowserPath            New-Item $tgtName -ItemType directory            Set-VMHostAdvancedConfiguration -Name $configName -Value ('/vmfs/volumes/' + $ds.Name + '/' + $tgtName) -Confirm:$false            Set-VMHost -VMHost $_ -State 'Maintenance' -Confirm:$false            Restart-VMHost -VMHost $_ -Confirm:$false            Set-VMHost -VMHost $_ -State 'Connected' -Confirm:$false        }    }    Disconnect-VIServer -Server $_.Name}
  
  Set-PowerCLIConfiguration -DefaultVIServerMode $mode -DisplayDeprecationWarnings:$warn
  

  It uses the DatastoreBrowserPath that Vitali has suggested.

• How can JDev. automate?

  I have an application that uses a web service. It is an application of ADF and java forms (JSF) and beans (in ViewController), a model and then Proxy classes to connect to the web service. I am new to jsp, adf, and web services, but by playing, I could create a whole package for using JDev proxy classes. Assistant (with all classes, xmls, everything). It was really cool. Can I automate the process or further it is to say, for example to create model from the proxy classes or view controller? I'm new and advice, tips or information are welcomed.
  
  Thank you
  
  Published by: user12054715 on October 25, 2009 14:42

  You can also create your interface JSF for the Web Service declaratively.
  See: http://blogs.oracle.com/shay/2009/01/basic_sample_of_the_web_servic.html
  Check out these tutorials:
  http://www.Oracle.com/technology/OBE/obe11jdev/Bulldog/WebServices/WS.html
  and
  http://www.Oracle.com/technology/OBE/obe11jdev/11/wsdc/wsdc.htm

• Illustrator will not store my settings. When I re - open the program, my settings are lost. How can I get the program to save my settings?

  Illustrator will not store my settings. When I close and reopen the program, some of my settings are lost; persistent color palettes, type of unit. How can I get the program to save these settings? We have several computers through Adobe CC and one of them has this issue. We have tried to reinstall the program, does not. Looking for someone who has had this experience and has an idea about a solution AND what is the problem.

  Jason

  Check the permissions on your user files. Looks like you have not allowed to save there who HAVE requires that the last thing that made when closing is to write the current version of the preferences.

• How to automate the process of loading data using load file & Task Scheduler

  Hello
  
  I do the automated processes to load the data into Hyperion Planning application using the file data_Load.bat & Scheduler of tasks.
  
  I created Data_Load.bat file, but the rest of the process, I cannot complete.
  
  Could help you me, how to automate the process of loading data using the file Data_load.bat & task Scheduler or what are the rest of the file is require it to achieve.
  
  Thank you

  In response to your question using the maxl for loading scripts?

  If Yes, I've seen and deliver in the batch (ex: load_data.bat) that is you do not have the path of the maxl script complete with a batch when passing through the event the task scheduler will work, but the log file and / or error will not be created. Which means lots claims it linked task scheduler, although he did not do what you need to.

  If you use maxl use this as the batch

  "essmsh C:\data\DataLoad.mxl" or you can also use the full path for the maxl or work elsewhere. The only reason why I think that the maxl can then not work is if you do not have the updated batch updated to call on all LANE changes maxl or if you need to update your environment variables to correct the command essmsh to work in a command prompt.

• I'm currently developing the feature keys on my MacBook. In the process, he asked that I enter a code sent by message to a phone number (only the 2 last digits are revealed) that I do not have access to.   How can I fill the activation?

  I'm currently developing the feature keys on my MacBook. In the process, he asked that I enter a code sent by message to a phone number (only the 2 last digits are revealed) that I do not have access to.   How can I fill the activation?

  See "change how the new features can be approved" here:

  OS X Yosemite: Configure iCloud keychain

  As you can see, this allows you to change the phone number.