How can I connect to the internet on my iPod Touch if I have the broadband accessible and portable wifi active?

Similar Questions

• How can I connect to the internet? Problems involving the network and sharing Center does not.

  Hello.
  I live in a House and bought a range extender so that I can get a connection in my basement as well.  I have installation range Extenders without problem.  When you install the range extender, I changed my name to my network router.  I changed the name of the network by typing 192.168.1.1 in my browser.
  The MacBook connects without a problem.  In the basement, the connection of Windows 7 works very well.  I have just connected Vaio Windows 7 my mother to the network, but it prompted that I enter the user credentials.  I read a post above and got that problem solved by opening the network and sharing Center and adding a new connection.  Now that the connection is configured correctly.
  The problem is with the laptop HP Windows Vista family basis.  Since I install the range extender, I can't connect to the network.  He had no problems before you connect the router or other networks to visit other places.  The new network name appears, but when I click it, it says I have to enter the user credentials.  I tried to manually, but the name is taken so I can't make a new and invites me to connect to the network that is established or to connect to a different network.
  • I tried to open the network and sharing Center, but it does not open.  When I click it, it opens a screen for a brief second.  The option "Display the status of network and tasks" opens either.

  • I logged as an Administration by entering the command line < net="" user="" administrator="" ctive:yes=""> > and restarted the laptop.  Even logged in as administrator, this folder does not open.

  • I also did a scan < sfc="" cannow=""> >.  The digitized rolled up with an error, but the error has been corrected.

  • I also updated the connection of the range extender.

  Why the network and sharing Center will not be open to the top?
  How can I configure my router my HP Windows Vista Linksys connection?
  Thank you.  Please let me know if you need more information.

  Thanks for your reply.

  In a last attempt, my sister has used the ethernet cable to connect directly to our router.  Next time, she turned on her laptop, she managed to connect to our wireless network and she was not invited to enter credentials.
  In this case, the manual connection helped solved the problem.

• My sister has problems on his laptop, how can I connect to the laptop with my labtop to help him with his computer problems? Thank you.

  My sister has problems on his laptop, how can I connect to laptop with my labtop to help her with her computer problems when I live several States away? Please help me if you know how to do this thank you.

  Suggest you use Team Viewer, free version.
  It is used here every day for several hours.

  Please see the links below for more details...
  http://www.TeamViewer.com/en/index.aspx
  http://www.TeamViewer.com/en/products/remotecontrol.aspx
  http://www.TeamViewer.com/en/help/cat15-remote-control.aspx

• How can I connect to the server through putty unix

  Hello

  Could you please help me on this query, how do I connect to the server through putty unix

  If I have different unix servers so how I choose my destination server

  Thank you.

  What does this have to do with SQL or PL/SQL?

• How can I determine reliably the pixel width and height of the screen?

  Hi all.

  The JavaDoc for Display.getHeight () and Display.getWidth () States that:

  Retrieves the total drawing height of the display.
  
  Retrieves the total drawing width of the display.
  

  respectively.

  What that means, is that if the software keyboard (for example a 9860) is opened, the value returned by getHeight() will be different from the value returned when the keyboard is NOT open.

  SO, how can I reliably get the width/height in full real pixels of a screen?

  You coulld get just once at boot - time before your application has opened a form with an input field.  Sharing this trick.

• How can I connect to the internet when theres no internet connection click on?

  When I click on Control Panel, then I click on network connections, usually theres things that you can click on to connect to the right, well internet theres none on mine how do?

  Click Start, run, type devmgmt.msc and press to enter.
  Are there subjects with a yellow question mark?

• How can I connect to the internet through the dial upward through the computer another internet connection?

  If you want to tell me that MS will not support Windows 2000, please do not post. The computer on which internet Wi - Fi Connection has Windows Vista Home Basic on it. The computer that has WiFi but I want to test its dial-up access windows 2000 top. It has WiFi with utility that is necessary. It includes 12 Opera browser. As a resort last, if it is not possible at all means, ultimately, let me know how to connect to the internet through another computer via the telephone line through Internet connection sharing or network connection. Any help will be greatly appreciated. Remember, this is on the internet. Not on whether or not Microsoft does not support Windows 2000. If you tell me how it is not supported, please do not post. Internet connection will be between the two modems and two computer on Windows 2000, it has a LT Win modem and the Vista Home Basic has a CX110 in generation something like this modem. I ask this question is because my land line will not dial a number. I would like to test a dial, and if you tell me how it's slow, I use DC Unlocker to a broadband speed, so it won't be slow. Any help will be greatly appreciated. Windows 2000 has an Ethernet port.

  Hello

  1. are you referring to Windows Server 2000 or Windows ME?

  If you are referring to Windows Server 2000, please help the professional community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  http://support.Microsoft.com/ph/1131

  If you use Windows ME, visit the below mentioned link.

  http://support.Microsoft.com/kb/234815

• How can IM connected to the wireless network, but not to the internet, I fix?

  my laptop can no longer connect to the internet, but for the wireless network I can view other computers on the network, but can't go on the internet it says unidentified network.
  I took all the troubleshooting steps to resolve this problem without success.
  all ideas

  Scott,

  Are you the same Scott, I tried to help the last month? If this is you, I left a couple more views. In one of them, I explained that exactly the same problem you encounter happened on my son's computer. I just disabled the router, waited for about ten seconds and he turned his back and that's what it took. I used actually utility of Windows troubleshooting and he advised me to do.

• DeskJet 2542. Help, please! How can I connect to the ipad

  I just bought the deskjet printer 2542 for my son as I said it would work with his iPad. I don't have a computer/laptop and the software is not compatible to download on the iPad. How to connect the printer to the connector wireless without it? Still, can it be done? Really hard!

  Hello Ro1312,

  Welcome to the Forums of HP Support!

  You are able to connect the Deskjet 2540 to the network with only an iPad, I'll link the steps below.

  Re: Hp 2542<>

  Let me know if it helps.

• How can I connect to the office of the administrator?

  "I have two account beside the adminstator account, mine and account of wives."

  How can I log into admin account?

  I discovered that I need to active the administrator account.

  C: netuser administrator / Active: Yes

  Disable is netuser administrator / active: No.

• How can I connect on the window by accident if I forgot the password

  I can not connect computer and reset password is not available unless I created discs using my passords. is it possible, I can log on window without tryiny to remember my password?
  appreciate in advance for your help

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  See you soon. Mick Murphy - Microsoft partner

• How can I connect to the account after forgetting the password?

  Original title: how to unlock user accounts if you forgot the password?

  How to unlock user accounts if you forgot the password? I tried to reformat, but it won't work...

  How to unlock user accounts if you forgot the password? I tried to reformat, but it won't work...

  There are a lot of options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

  If you take any of the precautions above (creating a password reset disk, creating an admin account to spare using an index of password) you can then perform a destructive factory restore. Consult the manufacturer's web page for detailed instructions.

• My new site is done, now I do a phone and tablet version. How can I connect all the 3 sites with having duplicate content.

  Hi again.

  When I close my phone and tablet version on my site, I intend to have two large buttons at the top of the Web site that say "CLICK HERE for VERSION PHONE" AND "PRESS HERE for TABLET VERSION.

  How you launch the phone and tablet with making it duplicate content?

  ... Make articles to submit my site with 3 different versions?

  For example,.

  (1) see HumboldtPitBulls.Com for some of the best traditional dogs (goes to 'normal PC version' of the website)

  (2) If you are interested in seeing see some beautiful APBTs website (goes to 'version of phone' web site)

  (3) If you want to learn more about the history of the old Rednose Pitbull family discover our items (goes to version 'Tablet' on the website)

  Please tell me I didn't need on the 'market' all 3 versions separate. Looks like more work that simply "come see HumboldtPitBulls.Com".

  Thanks again!

  Hello

  You can create all three layouts of your site in a single file of Muse and publish/export/upload as required. Muse generates the code to detect the device used by the user and automatically redirects to relevant content... You only need to promote the "yourbusinessname.com" and Muse handles redirection to "yourbusinessname.com/phone/" or "yourbusinessname.com/tablet/" depending on what device you use to access the site.

  Please see a few resources around Muse: Designing for Devices.

  http://TV.Adobe.com/watch/Muse-feature-tour/Adobe-Muse-designing-for-mobile-devices/

  http://www.adobepress.com/articles/article.asp?p=2219864

  http://helpx.Adobe.com/Muse/using/creating-website-mobile-devices.html

  See you soon,.

  Vikas

• How can I connect to the Adobe site?

  How you connect to the adobe site?

  Click sign out at the top right of a page of adobe.com.  or, if you want to disconnect from your cc app, open it > click on the gear icon > preferences > account > disconnection from the cc.

• How can I connect to the console?

  Hi guys! I am using Vmware ESXi 3.5 in my host server, is it possible to enter in the console?

  Thank you.

  ESXi 3.5 comes with the ability to run SSH, but this is disabled by default (and is not supported). If you just need access to the ESXi console, you just perform the steps 1 to 3.

  (1) on the console of the ESXi host, press ALT - F1 to access the console window.

  Input 2) unsupported in the console and press ENTER. You won't see the text you type.

  (3) If you typed in not supported properly, you will see the Tech Support Mode warning and request a password. Enter the password for the root connection.

  To enable SSH, follow steps 4-6.

  (4) you should see the prompt of ~ #. Edit the inetd.conf file (enter the vi/etc/inetd.conf command).

  (5) find the line that starts with #ssh and remove the #. Then save the file. If you start using vi, and then move the cursor to the line of #ssh and then press the INSERT key. Move the cursor on a space, and then press BACKSPACE to remove the #. Then press ESC and type: wq to save the file and exit vi. If you make a mistake, you can press the ESC key and then type that information: q! exit vi without saving the file.

  (6) once you have closed the vi editor, run the command /sbin/services.sh restart to restart management services. You will now be able to connect to the ESXi host with a SSH client.

  If you find this response or other useful, don't forget to mark it as correct or useful.