How can I control 4 sets of compact system of RIO with my host PC?

Similar Questions

• How can I control external devices using a stand-alone touchscreen with a LabVIEW app

  For my senior project my group design and created a vehicle for extended range hybrid with 90 Li + battery which is charged by a 15 kW generator and/or who is also charged by a 5 kW fuel cell. Currently, our system is able to measure the tension on batteries and display them on a laptop via LabVIEW. To process these data, we use a cRIO FPGA. What we would like to do now, is having a touch screen for the pilot to choose which loads of source of battery power so that monitor a pressure reading from the fuel tank.

  What kind of touch screens to LabVIEW to be downloaded on and used for controls?

  A cRIO has the necessary capacity to supply such a screen and handle the transfer of the data from the sensor fuel and relay (for turning on and off will deepen)?

  Do I need an additional license to create stand-alone applications and how I would go about creating a stand-alone application?

  Sorry for the question as much. Any help with the answer. Thank you!

  This looks like a very interesting project.  If you are interested, National Instruments organizes an contest of Design student where you can win cash or a trip to Austin for NIWeek.

  steve215 wrote:

  What kind of touch screens to LabVIEW to be downloaded on and used for controls?

  NEITHER sells computers touch screen that can be used to control LabVIEW applications.  You can find more information here: HMIS and industrial touch panels and here: LabVIEW Real-time and Touch Panel Deployment and replication resources. Our computers 6-inch touchscreen , run Windows CE, programming on them is a little different from the programming on a full Windows operating system.  You can find useful getting started with LabVIEW Touch Panel Module .

  You can use third-party with the LabVIEW Touch Panel Module devices, although it takes a deployment license for it.  More information can be found in the getting started guide.

  If you were able to send the information of cRIO on a network (which according to your description, seems unlikely), you can use a smartphone to control your application.  More information on our community of Smartphone group.

  steve215 wrote:

  A cRIO has the necessary capacity to supply such a screen and handle the transfer of the data from the sensor fuel and relay (for turning on and off will deepen)?

  If you use the 6-inch touchscreen panels, they need 18 to 32 VDC (the fuse becomes an open circuit if the input level exceeds 33 VDC).  The transfer of data from the switching relay can be monitored and changed with the touch screen.

  steve215 wrote:

  Do I need an additional license to create stand-alone applications and how I would go about creating a stand-alone application?

  If you have traveled the road of the touch panel, you need to purchase the LabVIEW Touch Panel Module and a touchscreen.  Touchscreens OR have a touch panel deployment license.  Guides step by step to create the stand-alone application are in the getting started with LabVIEW Touch Panel Module .

  Kind regards

  Elizabeth K.

  National Instruments | Sales engineer | www.NI.com/support

• How can I control the list of the available in the message SSL Client Hello cipher suites? I want to ban the MD5 and RC4.

  How can I control the list of the available in the message SSL Client Hello cipher suites?
  I want to limit my browser to negotiate the cipher suites fort. I would like to prohibit, MD5 and RC4.

  Set the SSL3 preferences related to false on the subject: config page (filter: security.ssl3.).

  • http://KB.mozillazine.org/about:config

• How can I control what FEED my CC from Adobe to?

  How can I control what FEED my CC from Adobe to?

  I did it!

  The cloud control creative program location

  CC App - file locations

  > Open creative cloud App (Image below)

  

  > Right click on it (gear, drop-down) (Image below)

  

  > Select and click on 'Preferences' (Image below)

  Applications TAB >-install Locatotion (F:\Programs)

  The files tab >-location of the folder (F:\)

  

  There you GO! (Image below)

  

  Useful links of video

  https://helpx.Adobe.com/creative-cloud/help/install-apps.html#download and install applications

  Download, installation, setting up

  How to properly set up the SSD as boot drive and the HARD disk as disk storage - YouTube

• How can I control a button from a swf file to another swf file?

  Hello

  I have a file main.swf . From this file I can access the file external.swf which is an external file.

  Now, how can I write code on my file main.swf to the button that is on my external.swf file?

  Activities.MainPanel.close_btn.addEventListener (MouseEvent.CLICK, btnClickClose);

  Activities.MainPanel.close_btn (This button is actually the external.swf file, but I want to write code on main.swf file to run it on external.swf) How can I control a single swf in another swf file button?

  Thank you.

  Some examples of code that you should be able to adapt to your needs.

  create a new instance of the loader object.

  var loader: Loader = new Loader();

  make the download request...

  var request: URLRequest = new URLRequest ("external.swf");

  Add a full event for the loader listener

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, completeHandler);

  start the actual loading process...

  Loader.Load (request);

  Create a new empty movieClip instance, you place the movie loaded into this movieClip after loading

  var externalMovie:MovieClip;

  This function is called when the download is complete and the file is ready for use.

  function completeHandler(event:Event):void {}

  set the contents of the film to the new empty movieClip...

  externalMovie = MovieClip (event.target.content);

  Add this new film to the display list.

  addChild (externalMovie);

  }

  Now you can reference the film loaded with the name of the instance 'externalMovie '. So if, for example, you want to address a button in the film loaded, you can write something like that on the main timeline:

  externalMovie.addEventListener (MouseEvent.CLICK, btnClickClose);

  function btnClickClose(event:MouseEvent):void {}

  }

• How can I control the concurrent programs?

  Hello
  When simultaneous GL & OPM ruinning programs, off-server peformance classes. How can I control it? I want to restrict the user not to submit or don't work not during office hours. How is it possible?
  
  Concerning
  Ariz

  Ariz,

  Please mention the version of the application, the database version and the operating system.

  The performance was accepted before? If so, what changes have been made recently?

  Is the problem with concurrent programs standard or custom? In addition, please mention the names of simultaneous (if possible) program.

  Do you run simultaneous program "Gathering statistics for schema" regularly?

  To find out why these simultaneous program affects performance, enable trace as shown (Note: 296559,1 - FAQ: Techniques of common tracing in the Oracle Applications 11i/R12) and generate the file TKPROF.

  You could schedule the program to run at certain times - see "Oracle Applications Documentation Set Guide system administrator" for more details.

  Oracle Applications documentation
  http://www.Oracle.com/technology/documentation/applications.html

  Kind regards
  Hussein

• How can I change the setting on my Apple to change the settings for automatic renewal at normal setting

  How can I change the setting on my Apple to change the settings for automatic renewal at normal setting

  I get a fresh fresh message on my credit card and I need to stop this setting automatic renewal for apple applications.

  If you mean cancel the renewal auto-renewal subscription and then follow these instructions: view, change or cancel your subscription - Apple Support

  (I asked for your message to be moved to the forum of the iTunes Store, where you have posted is for questions about the iTunes U app.)

• How can I control the working time so that the loop structure in the cases where the structure?

  Hi all

  My job is: Loop While structure generates the signal for 4 seconds when you press the 'start build' button, after that data has been backed up. You press the button "generate the beginning' once again, and the loop runs one again.

  My problem is: the first pressing, the loop, exactly 4 s (3, 999 s), but him second, third pressing on... The time elapsed is not 4 seconds, always smaller (even ~ s 0.003). The loop works correctly after press the "Exit" button and launch the program again.

  How can I control exactly time loop work While Structure without the press "Exit".

  Thank you any help!

  P/S: I used the number of cycles (ms) just to look at a working time of the While loop.

  NMCuong

  This shows a quick solution

  

• How can I make a set of my pre-installed Windows XP system recovery disks?

  How can I make a set of recovery discs from my Windows XP pre-installed system supplied with the machine? It works ok (so not the repair feature). It there is just so much junk from test facilities in the background that I want to do a complete wipe-out and re - install, but I don't have any original Windows XP disks.

  The process to create recovery disks is different according to the model of the computer.

  Check your manual for instructions or see website of support from the manufacturer for instructions.

• How can I create a set of installation / recovery discs?

  Right now, my computer works well with Windows XP, SP3.  How can I create a set of installation / recovery discs?

  I have the original series OEM number upwards, but have more discs - do I need something else before I start?  Can I make my own computer?

  Right now, my computer works well with Windows XP, SP3.  How can I create a set of installation / recovery discs?

  I have the original series OEM number upwards, but have more discs - do I need something else before I start?  Can I make my own computer?

  http://www.ehow.com/how_4797051_burn-Windows-XP-recovery-disc.html

• biometric: How can I adjust the setting on my computer so I don't have to drag my finger every three minutes?

  How can I adjust the setting on my computer so I don't have to drag my finger every three minutes?  When I walk away from my computer for more than 3 minutes... I have to re-do move my finger.

  If you mean every 3 minutes you get disconnected so your finger is to open a session back, right click on the desktop, select Personalize downstairs, and then in the new window click on screen saver or turn it off or set the number of minutes and make sure "on Resume, display logon" is NOT selected. If it happens again every 3 minutes, return to customize, select this time power options and change the time it takes for the screen to be able to something higher.

• When I press the SHIFT key to get to register this happened @: M and when I press on enter key this happens #__nb so how can I change the setting I tried to format it but it's always the Sammy _ same__Regards

  When I press the SHIFT key to get to register this happened @: M and when I press on enter key this comes up #.
  NB so how can I change the setting, I tried formatting but it's always the same
  Cordially Sammy

  Try another keyboard, if that solves your problem is faulty and should be replaced.

  "sammy06forever" wrote in the new message: * e-mail address is removed from the privacy... *

  When I press the SHIFT key to get to register this happened @: M and when I press on enter key this comes up #.
  NB so how can I change the setting, I tried formatting but it's always the same
  Cordially Sammy

• How can I control the Tasbar? It is always in sight and blocks the screens of other programs.

  How can I control the Tasbar? It is always in sight and blocks the screens of other programs. Using Windows 7 and Microsoft Security Essentials. "Lock the taskbar" is checked and "Auto-hide the taskbar" is checked. Help, please.

  Taskbar will appear to take with you when you either come from anywhere near the bottom of your screen or a security alert is displayed.

  The best I've found is to use the fullscreen with F11.

• Windows 7 network connection status sent/received packets in bytes by default. How can I change this setting so that the status is displayed in MBs.

  Windows 7 network connection status sent/received packets in bytes by default. How can I change this setting so that the status is displayed in MBs.

  Hey Muhammad,

  Thanks for posting the query on Microsoft Community.

  Design/default it appears in bytes not in MB.

  In the future, if you have problems with Windows, get back to us. We will be happy to help you.

• I want to get multiple clips horizontally through the frame, how can I control the speed at which the move?

  I want to get multiple clips horizontally through the frame, how can I control the speed at which the move?

  And the second