How can I copy vista on a new hard drive

I want to upgrade to Windows 7 and bought the disc. Until I do so I want to install a new hard drive of 1 TB. How to copy Vista from the old drive to the new drive?

You will need to reinstall Vista on the new drive (new installation) and then turn it on and then level to Windows7 and activate that.  First back up your data - it's about all you'll be able to save.  You will need to reinstall all your programs and reset all settings - they can be copied on to the new drive.  It works just like that.  An option that allows you to transfer data a little more than a simple (but not yet the programs) is to use EasyTransfer: http://support.microsoft.com/kb/928635. The review process and see if you can make it work in your situation.

Sorry, that is not a solution more simple that preserves everything on the original drive, but even if you did an image backup of complete and restored to the new drive, the device driver for the hard disk would be a mistake, and it is not possible to change it with the limited access, you will need to the system without being able to boot from the hard drive.  If you can find a way to install the hard disk driver after restoring using only disk access (which may be possible depending on what has been provided by the manufacturer of the hard disk - it would need to be a startup disk that can install device drivers, even if the hard drive is not available) This becomes a viable option - but I do not know how or if any manufacturer offers such a disc.

I hope this helps.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • How can I copy vitamin 2000 on my hard drive?

    How can I copy vitamin 2000 on my hard drive?

    This article:

    http://support.Microsoft.com/kb/198912

    explains the 3 ways to install Bookshelf 2000.

  • How can I download InDesign CS5 on new hard drive?

    How to load InDesign CS5 on new hard drive?

    Once you are on the download page, then click on InDesign CS5 and windows, that you have to click

    File 1 of 2 (716 MB)

    File 2 of 2 (1.2 MB)

    and download them one by one.

    Kind regards

    Garima SALAUN

  • How can I transfer programs on a new hard drive cloud creatives?   Currently they are on the C: drive and I need to move them to the E: drive?

    I need to move my Creative Suite cloud of my boot drive on another drive, E: in this case. How can I configure this for all future programs Adobe go when downloaded and updated?

    1. installation location change the default (as described by the poster above, under applications / CC / installation location.)

    2 uninstalling each app (using the "device" next to the name of the app). When prompted, indicate that the uninstall should not remove your settings.

    3 reinstall each app. It will be published in the new location of the installation. Your original drive will always be some files Adobe CC (and, I think, the application launcher Adobe CC itself), but most of your articles will be in the new location.

    g.

  • How can I copy music from an external hard drive in a folder of music on my Mac

    I used to have a Zune and all my music (about 5000 songs) was on my pc.  I copied all this music on a responsible and external hard drive to my iTunes library on my Mac, but I can't play unless I connect the external hard drive for Mac.  Whenever I try, I get the! and a message that the file is not found.

    Is it possible to download the songs from the external hard drive in a folder on my Mac so iTunes will be able to locate them?

    With the drive connected, open iTunes. Click the file menu and organize the library.

    (138107)

  • How can I copy music to a new computer from my iPod nano 2nd generation

    How can I copy music to a new computer from my iPod nano 2nd generation

    You will need to use 3rd party software to do.

  • Satellite L40: Can I use Toshiba DVD to install Vista on a new HARD drive

    Hi people,

    I'm new to this forum... I don't know that there, can someone advise me.
    I replace my Satellite L40 HDD with a bigger drive, the current is only 80Gig.

    And my question is, can I use my Toshiba recovery Disc to reinstall Vista on the new HARD drive, or is it a hidden partition on the original HARD drive?
    If someone has done this, would appreciate an idiots guide to doing the same thing.

    Cheerzzzzzzzzzzz...

    Dave

    Of course you can do it.
    The DVD of Vista recovery Toshiba help you install Vista, all the drivers Toshiba and tools, and it automatically creates all the partitions.

    So what you have to do is to boot from the recovery DVD and follow the instructions on-screen ;)

    Check it out!

  • Can I install Vista on the new hard disk drive recovery?

    Hello

    I'll have to replace the hard drive of my laptop Satellite A 200 and have only a drive with her recovery. I'll be able to install Vista on a new hard drive for him?

    Thank you

    Post edited by: xaver

    Of course, you will be able to do.

  • I need to reinstall Windows Vista on a NEW hard drive

    I need to upgrade my hard drive a 500 GB to a 2 TB hard drive. I want to keep the old hard drive as what without having to format. I'll put it on in the case where I never need to access the data that's out there. I have the key Windows Vista Home Basic 32-bit disk and license. Is it possible to just install it on the hard drive again without any license validation error or the old hard drive must be formatted to remove windows. Desktop PC. Thank you

    Hello

    Legally, you must save your data > wipe this most hard > re - install your data, and then use this drive hard as you would normally use an external hard drive. namely for data only.

    One license is for a single installation.

    _______________________________________

    You can have activation issues with the new hard drive and reinstall anyway.

    If you do, then use phone Activation > do not follow Auto prompt > but brace yourself for a real person explain to the.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

    * Original title: windows 7 download

    I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

    It has probably comes with Windows 7 Professional 64 bit.

    You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

    You can also use Windows 10 too as you have the right to it as a free upgrade:

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Reinstalling Vista on a new hard drive in a Dell XPS420

    I have been using my Dell XPS 420 for years, but lately the C: drive (with Windows Vista Home Premium and the recovery partition) are dead. I had to reinstall Vista on a new hard drive. It went well until Vista was finished all the updates that are accumulated. He says that my Windows is not genuine, and he refused to go further than the connection. The Windows CD is Dell and it came with the computer. My Dell warranty expired a long time ago. Can anyone help?

    Using the recovery process of the manufacturer normally does not require activation. It will activate itself during the recovery process.

    Product key and product ID are two different things

    Read this about AV Avast which causing 0xC004D401 error Code

    http://social.Microsoft.com/forums/en-us/genuinevista/thread/a3145e58-EAEA-43e5-B2DB-c15885076c48

    And read this topic to report diagnosis by Christmas Paton.

    http://social.Microsoft.com/forums/is/genuinevista/thread/a3fda1a0-6199-41a4-b3d6-5be62cae3d79

    And if necessary, repost in the Vista install, upgrade, and activate forum (this one).

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install?page=1&tab=all

    Noel Paton, he will come here.

    This is the right forum, but it may not read fine on the information contained in the header not mentioning not activation problems

    See you soon.

  • I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do

    new hard drive

    I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do thanks in advance

    How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
    http://www.PAGESTART.com/acronisnewharddrive01.html

    The same technique should also work for Vista.

    Note: Acronis now sells their 2012 for the UI version may be slightly different.

    J W Stuart: http://www.pagestart.com

  • Problems installing vista on a new hard drive

    I just finished installing vista on a new hard drive, and now the computer is unable to find internet connections. any suggestion would be great!

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

    The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

    See you soon.

    Mick Murphy - Microsoft partner

  • I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

    I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

    YYou want to save raw images, but not all? Is that what you mean? When you import into FVP you can select the songs you want and you can set the library in the Inspector to record the files on any player, anywhere.

  • How to install Windows 7 on the new hard drive?

    I changed the old hard drive (500 GB) with a new hard dirve (1 Tera) and now I have two problems:-

    1. how to install Windows 7 on a new hard drive?

    2. my laptop came preinstalled Windows 7 Pro, but all the DVD kit (disk reclaimer Application & discs) + Revocer operating system, which has been provided (by Lenovo) for the laptop is in the Windows 8 Pro. So, how to install Windows 7 Pro, my laptop while all the DVD sets are in Windows 8 Pro?

    either way, this is my laptop spec (for reference); -

    * Note *.
    I intend to install Windows 7 Pro on my new hard drive using another DVD of Windows 7 (not DVD provided by Lenovo), but how do all Leveno program located in the disk 'Application & recuperator readers' (by example; - Lenovo system health and Diagnostics, Lenovo Power Control, Lenovo Fingerprint Reader) to install this hard drive? (as I told you before, all the DVD kit is at or only for Windows 8 Pro)

    I hope someone will help me answer my question,
    Thank you

    I found the solution.

    Response to question 1; using a recovery & backup software to clone my current operating system, and then transfer them to my new hard drive.

    Response to question 2; Download all drivers and software (all the application that located on the DVD of the kit I have) on the official website of Lenovo.

    or another solution, send to a computer service shop and let the experts (workers) install it for me (the most simple and sure way).

Maybe you are looking for