How can I copy vitamin 2000 on my hard drive?

Similar Questions

• How can I copy vista on a new hard drive

  I want to upgrade to Windows 7 and bought the disc. Until I do so I want to install a new hard drive of 1 TB. How to copy Vista from the old drive to the new drive?

  You will need to reinstall Vista on the new drive (new installation) and then turn it on and then level to Windows7 and activate that.  First back up your data - it's about all you'll be able to save.  You will need to reinstall all your programs and reset all settings - they can be copied on to the new drive.  It works just like that.  An option that allows you to transfer data a little more than a simple (but not yet the programs) is to use EasyTransfer: http://support.microsoft.com/kb/928635. The review process and see if you can make it work in your situation.

  Sorry, that is not a solution more simple that preserves everything on the original drive, but even if you did an image backup of complete and restored to the new drive, the device driver for the hard disk would be a mistake, and it is not possible to change it with the limited access, you will need to the system without being able to boot from the hard drive.  If you can find a way to install the hard disk driver after restoring using only disk access (which may be possible depending on what has been provided by the manufacturer of the hard disk - it would need to be a startup disk that can install device drivers, even if the hard drive is not available) This becomes a viable option - but I do not know how or if any manufacturer offers such a disc.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I copy music from an external hard drive in a folder of music on my Mac

  I used to have a Zune and all my music (about 5000 songs) was on my pc.  I copied all this music on a responsible and external hard drive to my iTunes library on my Mac, but I can't play unless I connect the external hard drive for Mac.  Whenever I try, I get the! and a message that the file is not found.

  Is it possible to download the songs from the external hard drive in a folder on my Mac so iTunes will be able to locate them?

  With the drive connected, open iTunes. Click the file menu and organize the library.

  (138107)

• I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

  I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

  YYou want to save raw images, but not all? Is that what you mean? When you import into FVP you can select the songs you want and you can set the library in the Inspector to record the files on any player, anywhere.

• How can I change the address of a hard drive of the add-on?

  How can I change the address of a hard drive of the add-on?

  If by address you mean the drive letter and you mean a removable drive, open disk management (right click on computer and select manage or open for administrative tools computer management).  Right-click on the drive and select change drive letter and paths.

• How can I reinstall audition CS6 upgrade after hard drive crash?  Qualifying previous product is not on my computer.

  How can I reinstall audition CS6 upgrade after hard drive crash?  Qualifying previous product is not on my computer.

  Never mind.  I found the license key for the previous product and was able to complete the installation.  Being a "pack rat" has its merits, sometimes.

• How can I reinstall Indesign after that my hard drive has been deleted?

  How can I reinstall Indesign after that my hard drive has been deleted?

  After obtaining a hard drive in working condition, you can reinstall the software using the discs if you bought the discs, or you can download your software as a trial version and use your original serial number to activate it.

  If the software is the latest version, you can download it from the Adobe product pages.

  If the software is an older version, you can download the demo version of the software using the link below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download on this site.

  http://prodesigntools.com/tag/DDL

• I can't find my external hard drive under 'Computer' but it appears in "Devices and printers" How can I access files on my external hard drive?

  I can't find my external hard drive in "computer".

  I just bougth a new HP computer running Windows 7.  I just copied a bunch of movie files, music and photo of my old Mac (OSX Leopard) on a Western Digital external hard drive.

  I plugged the external drive in my HP via USB 2.0 on the front of the computer.  Windows recognizes the drive.  She appears in the Panel of external control/hardware and Sound/devices and printers as "HARD disk".

  It does not appear in 'Computer' under 'devices with removable storage ".

  I just want to get to my files so I can copy them to my new computer.  How to access my files on the external hard drive?  Why isn't he appear in 'computer '?

  Hello ShamedMonkey,

  Thank you for your message.  The problem you are having is because of differences in formatting between PC and Mac.  You can, however, transfer your files between the two.  I will set out what must be done under and limitations of each.
  First, you will need to format the drive on your PC.  When you format the PC, you can format it in FAT32 or NTFS.
  (You mentioned that you do not see the drive in the computer) To format drive:
  Click 'Start' > right click on 'Computer' > select 'manage '.
  Click on "disk management".
  In the right pane, you should see your drive > you can then do a right click and 'format '.
  FAT32:
  This format will allow you to easily transfer files between the two.  This format becomes problematic when you transfer files more than 4 G.  There is a limit of 4 GB in FAT32, etc. of many movies are bigger than that and cannot be transferred using this format.
  NTFS
  This format has no size limitation, however, in its normal state it will be 'Read only' on Mac.  If you will not be able to transfer all the data itself.  While doing some research on the web, it seems that you can use a program called MacFuse on your Mac to change to NTFS files.  I have not confirmed this, but you can give it a try.  If this program works as planned, it would be the way to go.
  Please let us know if it did or did not solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• In iMovie 9.0.4 How can I move events to an external hard drive?

  Note: I am writing this issue on behalf of my daughter, who is an old iMac running 10.6.8.   His version of iMovie is 9.0.4.

  She has about 50 GB, events which occupies about one-third of its HD.  There is an external hard drive with lots of available storage.

  How to pass these events to the external hard drive?

  Thank you

  Owen

  For a long time I used iMovie 9 but this link to the help info gives instructions: http://help.apple.com/imovie/#mov3ac6d42c

  Its probably safer to copy rather than move events (unless you already have a backup) just in case something goes wrong.

  Geoff.

• How can I reinstall windows from my old hard drive on a new solid state drive?

  I'm considering buying an SSD and want to reinstall windows from my original hard drive (there is only a recovery partition on the original hard disk and no drive of the Windows operating system).  Anyone can guide me through the process or do I buy a new copy of Windows.

  Hello

  You can create a recovery from your old hard drive disk, or you need to contact HP technical support and order the part or click on the link given below on a command line drive by yourself.

  Create a set of recovery disks operating system

  Order of the recovery disc for Windows 7, Vista or XP

  
  

  
  

• How can I transfer encrypted files from old hard drive removed (transfer windows easy?)

  Hello

  I'm trying to get some files off my old hard drive encrypted. He has xp on it, and I can't start on my new computer. Since it is a separate, apparently, I can't do either windows easy transfer. Is it possible for me to locate the certificate and key, or to transfer files with the key and the certificate on my new computer (I have password from the old computer if I need that)? Can I somehow run WET on this hard drive for keys/certificates can be transferred. This seems to be a common problem from what I have read.
  Otherwise, do you have ideas on how to start my old xp disk on my new system without reformatting?
  Very important to get these files.
  Thank you!

  First of all, I assume you mean encrypted files (EFS, Encrypting File System).  These files are encrypted with a key that is still encrypted in your system like a certificate.  In order to read your encrypted on any other system files, you must restore the certificate from a backup.  The short article is mandatory for anyone considering the use of EFS:
  "Best Practices for encrypting file system"
      <>http://support.Microsoft.com/kb/223316 >
  Special attention to the subsection down titled "why you should back up your certificates.

  HTH,
  JW

• Urgent please help: How can I find on what fills my hard drive?

  My drive C guard fills, and I don't know why.  Yesterday, I removed more than 40 GB of files and delete a lot more (I emptied the Recycle Bin).  In the last 4 hours, filled an another 30 GB and I'm now in the red zone (5 GB in the last twenty minutes!).  I only kept a very small Word document on the hard drive.

  It only started past recently, in the last two weeks or more.  I am on Windows Vista and I have McAfee.  I recently completed a full scan and nothing significant has come.

  I have only 5 GB on my C drive on the left, and there is nothing more that I can remove it.  How can I find out what does this and how do I that to solve this problem?

  Any emergency assistance will be greatly appreciated!

  Thank you.

  Free disk space
  Last updated 18/01/2014
   

  Content

  • To see how much space you have used and free
  • To see where the files are too much space
  • Disk Cleanup
  • System restore
  • Fix the basket
  • Fix temporary Internet files
  • Delete files in the system and the folder Temp of Service Profiles
  • Check the size of the swap file
  • Disable the hibernation
  • Compact the Windows databases use various
  • Delete the files updated by the Service Pack
  • Move your Documents
  • Remove saved files created by Photo Gallery
  • Which extends the size of the disk
  • Compress files
  • Turn off the low disk space warnings
  • Boost disk cleanup
   

  To see how much space you have used and free

  Start - All Programs - Accessories- Click with the right button on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  For the system drive

  WMIC volume where (DriveLetter = '% lecteur_systeme %') are legend, capacity, freespace List

  For all readers

  WMIC volume get/all, freespace, the ability, the legend

  If you want to store this info on your desktop

  WMIC /append:"%userprofile%\desktop\Free on disk space" volume get Caption, freespace format:htable

  To open double click on Free Disk Space on your desk or type

  Start "" "%userprofile%\desktop\Free report.HTML of disk space.

  Then come back here after cleaning and repeat these commands to see the difference.

  If for any reason, the wmic command does not work, use these two commands. Both take a lot of time.

  % Lecteur_systeme % - one defrag

  or

  dir %systemdrive%\*.*/a/s

   
  To see where the files are too much space
   
  It lists the number of files and the size of the folders on your drive. Each command is a subset, so you can run it better.
   
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
   
  Then configure the command prompt. Right-click on the tab of the titlebar - Properties - Layout command prompt - and enter 1000 screen buffer size height and 43 (or 50) to Window Dimensions height. Change the color (color tab) and the police (police tab), if you want.
   
  To see the size of the folders in Documents, excluding images, video, or music files.
   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Personal"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "\/"^|findstr/l/v "photos video" ') @echo %j & echo. "

   
  To see the size of the folders in the music.
   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My music' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the image files.

   

  for /f "Skip = 2 tokens = 4" %A in (' Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" "My pictures" /v ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files in the video.

   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My videos' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files on the desktop.

   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Desktop"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

  To see the size of the files in the Windows folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%windir%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   
  To see the size of the files in the Program Files folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%ProgramFiles%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

   

  Disk Cleanup
  To run Disk Cleanup, normal is to click with the right button on the drive in my computer (Start menu - computer), then Properties - general tab - Disk Cleanup button.
   
   
  Another way is menu Start - All Programs - Accessories - System - Disk Cleanup tools.
   
  Disk Cleanup can be started from the command line.
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   
  To make your primary drive.
   

  cleanmgr letter

   
  Choose which lead to do.
   

  Cleanmgr

   
  See the last section of this post to see how to performance of disk cleanup.

   System restore

  With disk cleanup displays above the Other Options tab. You can delete all but the last System Restore point and see if that is too much space.

  System Restore uses 15% of the space normally. Change click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and navigate to

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg

  Double click on DiskPercent and click on decimal and change the value to the desired percentage,

  You can change the command prompt.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the system restore folder.

  You don't normally have access to this folder. You will need to take possession, allow administrators to permission, then the size of the query.

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  dir "%systemdrive%\System Volume Information" / a/s

  To see the current percentage

  Reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent

  It is in hexadecimal. The numbers are 0-9 and a-f. So 0xf is 15. 0x5 is 5, 0 x 9 is 9, 0xa is 10, 0 x 14 is 20.

  To set a different value.

  You can use decimal values to set. This affects 10% (in bold in the example and the last item in the line).

  Tracking Add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent /t REG_DWORD /f /d 10

   
  To repair the system restore, file delete and restart the system restore.
    

  SC stop vss

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  e "%systemdrive%\System Volume Information" / q/s

  SC start vss

  Fix the basket

  Sometimes, files get lost in the trash. Remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.

  Empty the trash.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the files in the Recycle Bin

  It must have one or no files inside if you work. There should be a directory (folder) by user.

  dir % systemdrive%\$RECYCLE. BIN\ *. * /a /s

  To reset the trash

  e % systemdrive%\$RECYCLE. BIN/s/q

  Fix temporary Internet files

  Sometimes, files get lost in the temporary internet files folder. Delete the files. It will be automatically recreated the next time download you. It will remove the current user only.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the temporary internet files size empty files folder

  RunDll32.exe InetCpl.cpl, ClearMyTracksByProcess 8

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» "*" '%userprofile%\AppData\Local\Microsoft\Internet Explorer\DOMStore\*.*' / a/s

  Then delete.

  Close Internet Explorer and the Explorer first. Some files may not remove at the moment, they can be deleted later.

  "%userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files" del /s /q

  also the DOM store, similar to TIF.

  "%userprofile%\AppData\Local\Microsoft\Internet Explorer\DOMStore" del /s /q

  So to see the new size.

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» "*" '%userprofile%\AppData\Local\Microsoft\Internet Explorer\DOMStore\*.*' / a/s

   
  To see the size of the cache, type the following
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  Reg query /v "Settings\5.0\Cache\Content Software" CacheLimit valid

  Use the calculator to convert hexadecimal into decimal. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter the value returned above. Menu display - decimal. To convert windows units divide by 1024 for kilobytes, divide by 1024 megabytes.
   
  Located between 50 MB and 250 MB. You can use decimal here. The unit is expressed in kilobytes. Here it is 250 megabytes (250 000 x 1024 bytes)
   

  Add tracking 'Software Settings\5.0\Cache\Content' v CacheLimit valid /t Reg_DWord /d 250000 f
  

    

  Delete files in the system and the folder Temp of Service Profiles

  The system temp folder is only used when no one connects. It is rarely used but never cleaned. Some services have their own temporary folder which is also cleaned.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To the list

  dir c:\windows\temp C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp/a/s

  To remove

  del C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\*.* C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp\*.* c:\windows\temp\*.*/s/f/q

  Check the size of the swap file

  As a rule generally you want to your swap file slightly larger than the amount of memory that you have. It develops automatically but spread automatically. If you use hungery memory programs as this video editing should be bigger. If too big you can reduce and rush of space can be moved to another drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see what was your use

  WMIC pagefile get List

  To see the size of the file on disk

  dir /a c:\pagefile.sys

  To change the size or change the road see change the size of virtual memory in Start - Help and Support.

   

  Disable the hibernation

  The file shows up is the same size of installed memory. If this is not the case, turn off the computer in hibernation and save a lot of disk space.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see if it is on

  If the file will be found. If off the file won't be there.

  dir %systemdrive%\hiberfil.sys /a

  To turn off

  powercfg-h off

  Make a u-turn

  powercfg-h on

  Compact the Windows databases use various

  You can compact the various databases that Windows uses. This is the Windows Update, Windows Search, and certificates of security, Windows Mail, Windows Contacts, Windows, Windows Live and Internet Explorer ver 10 applications calendar.

  Close Windows Mail and Internet Explorer. Wait a minute for Internet Explorer release locks of sound files.

  See how much space taking up type which is below and note the total size (because it scrolls away).

  Start - All Programs - Accessories- Click with the right button on command prompt and choose Run As Administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  Then at compact

  SC stop wuauserv

  stop bits SC

  SC stop wsearch

  SC stop cryptsvc

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /p "%A" / o

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /d "%A".

  SC start cryptsvc

  SC start wsearch

  SC start bits

  SC start wuauserv

  Then to delete some temporary files.

  del c:\*.integ.raw c:\TEMPDFRG*.edb/s

  To see the new size and compare it to the old size

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  If a program has a file open, you can use this procedure to find out which program.

  openfiles/local on

  Reset

  openfiles/query /v | findstr /i "WebCacheV [0-9] *------catdb \.edb \.msmessagestore .dat".

  Delete the files updated by the Service Pack

  See how much space taking up type which is below and note the total size (because it scrolls away). Also, note that the total is higher than it actually is.

  This will remove the ability to uninstall service packs.

  According to the service pack that Windows was provided with you can have both, one or none of these two files.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir /a /s c:\Windows\WinSxS

  Then type

  Vsp1cln.exe

  COMPCLN.exe

  To see the new size and compare it to the old size

   

  c:\windows\WinSxS dir /a /s

  Move your Documents

  If you have another disk, you can move the documents folder to it.

  Click with the right button on your Documents (or pictures, etc.) Office, videos, Contacts,) the tab file - Properties - location - move.

   

  Delete the thumbnail and icon Caches

  These files can contain thumbnails or icons of files deleted a long time ago. The files will be recreated if necessary.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste). The desktop and the start menu will disappear briefly.

  To see the size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

  then remove

  Taskkill /im explorer.exe/f
  attrib - r s h '% userprofile%\AppData\Local\*.db '.
  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.
  del "% userprofile%\AppData\Local\*.db".
  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".
  Explorer

  to check the new size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

   

  Remove saved files created by Photo Gallery

   

  Photo Gallery Windows makes a copy of any file that you are editing. Click Start - All Programs - Accessories - (or press the Windows key + R). Type

  Images of the hull: original

  Delete the ones you don't want.

  Which extends the size of the disk

  If all the space on the disk has not all been used it is possible to extend your drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  DiskPart

  then type

  Select the c volume:

  Then type to see in size

  the list volume

  then (it will work if possible or not as appropriate)

  extend

  type to display the new size

  the list volume

  then type exit

  output

  If you want advice on the extension of the partition type the following and paste the result back

  DiskPart

  list disk

  the list volume

  Select disk 0

  partition from the list

  Select disk 1

  partition from the list

  output

  To copy the final text right click in the window - Mark , then select the text and press enter.
   

  Compress files

  There are two ways to compress files in windows. Zip files and built-in file compression. It's built-in file compression. For more information on compression type zip in Start - Help and Support .

  Photos, music and video are already compressed. They can get larger if Windows tries to compress it any further. Also usually a bad idea to compress system files.

  If you have files of worksheet they can very well be compressed. If you have files, installation files, they can also be good candidates. Web pages are also good candidates.

  In Windows Explorer, blue file names means Tablet (it is the file system compression not aka zip files compressed files). Green filename means Encrypted.

  To disable file names colored, in Explorer - Tools menu (Alt + T)- display tab and then clear the check box for Show encrypted or compressed NTFS in color .

  Windows compression, encryption and security to work for the most part by applying attributes to a folder and the files in the folder inherit the folder.

  If you have all the files appropriate for compression, find them in solution, made Explorer right click - Properties - general -Advanced button tab - Compress contents to save disk space. Choose to apply to all files and folders when asked.

  To use a command line to compress the files in the Favorites folder.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  compact/c /s:"%userprofile%\Favorites." *

  Put in Favorites to compress files added

  compact/c /s:"%userprofile%\Favorites.

  To view the details of the compression of the Favorites folder

  Compact '% userprofile%\Favorites\*.* '.

   

   

  Turn off the low disk space warnings

  To disable the function to display the disk low space warnings.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" v "NoLowDiskSpaceChecks" /t REG_DWORD /d 1 f

  gpupdate/force

   

  Boost disk cleanup

  • Operation of disk cleanup
  • Schedule disk cleanup
  • Creating custom cleaners

  To see a list of products of cleaning disk cleanup.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  @echo. & @echo list of cleaners&@echo = & FOR /F "usebackq tokens = 8 delims =-' %i IN ('reg query 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches'") @echo %i

  
   List of cleaners
   ================
   Active Setup Temp Folders
   Content Indexer Cleaner
   Downloaded Program Files
   Hibernation File
   Internet Cache Files
   Memory Dump Files
   Microsoft_Event_Reporting_2.0_Temp_Files
   Offline Pages Files
   Old ChkDsk Files
   Previous Installations
   Recycle Bin
   Setup Log Files
   System error memory dump files
   System error minidump files
   Temporary Files
   Temporary Setup Files
   Temporary Sync Files
   Thumbnail Cache
   Upgrade Discarded Files
   Windows Error Reporting Archive Files
   Windows Error Reporting Queue Files
   Windows Error Reporting System Archive Files
   Windows Error Reporting System Queue Files
   WLX Thumbnail Cache
  

   

• How can I load OS after reformatting my hard drive on macbook pro

  I have a macbook pro with questions 2007 vintage.  I need to reformat the hard drive.  Once I do this how

  If your Mac OS x v10.7 or later, start your Mac while pressing the command + R keys. From there you can reformat the hard drive and OS X using OS X recovery of restoration

  If your Mac is running OS X before v10.7, insert the installation disc while holding down the C key.

• How can I install Thunderbird on an external hard drive, ensure that all emails are on the external hard drive? Can I direct emails to an external hard drive to my PC?

  I want my emails on my external hard drive. How to go there directly? Thank you.

  Go to the Thunderbird profile folder.
  -Open the Explorer, type %appdata%\microsoft\windows\sendto in the address bar and press ENTER.
  -You will find a folder named Thunderbird. Open it.
  Copy/move the subfolder of the profiles to your address file
  -Open the profiles.ini
  -Change IsRelative 0
  -Change of path to something like this: K:\Thunderbird 3\Profiles\b8p1vx2s.default (with the new path of your profile folder)

• How can I run iTunes on an external hard drive?

  Hello

  I like to keep all my music on an external hard drive.  How can I have iTunes on my desktop iMac 'search' or 'find' my music on this external drive library, rather than import all about my native drive on mac?

  Launch iTunes with the Option key and choose a library on it or create an it.

  (142376)