"bootstrap" central image

Similar Questions

• Do not click on the central image buttons?

  Hey you look at this image, I can't click on these buttons. No idea why? Thank you.

  

  They are to help you to align different layers.

  Select two layers in the layers palette, and many of these buttons will become active.  Choose three and they all become active.

  -Christmas

• Adding to my last question... To keep a background image in the center of the Web page when the browser is shrun

  How do do that?  What is the CSS that makes this work?

  Centers of the background, even when the browser window is smaller or the screen resolution is less, but the content remains stationary in the center of the page: www.signatureweddingsbyjenna.ca

  Hello Jules

  I think that Nancy replied to your question in the other thread.

  I have the site you give as an example, this is the CSS that applies to this image:

  {body

  background - image: URL("page_images/background.jpg");

  bottom-top position: center;

  background-repeat: repeat no.;

  }
  Then of course, it is applied as the context in which theelement, it is placed in the Center and on it and it does not repeat itself.  It is what keeps the central image on the page.  Also helps is that the page is a centered layout.  In the example page that you gave, they have this:
  #page, closure-blocks # {}

  margin-left: auto;

  margin-right: auto;

  Width: 1000px;

  }

  Set the width is important and defining the left/right margin as it means that the browser will allocate the rest of the available space at each margin evently between the two, or put content in the middle.  The only other thing you do is to set the content of the site to the center using
  text-align: center
  It is exlpained herefully.  The only other thing the site has done is put a bit of image information in another element to make it appear that the background image loops in the content.
  Martin

• I followed quite the tutorial format, in the development of my site, but the image is passed.  No idea why?

  Did anyone mind having a look at my website, www.uniquehomedesigns.net, to see if you have any idea why the photo dropped?  I edited (smooth it), but I don't know if that had anything to do with it.  In any case, my sad little website looks even more sad with my photos misbehaves.

  As if I really know what I'm doing, I'll try to attach relevant files.

  You must remove the

  surrounding this third image in the right column

  However, by inspecting the code on the page, you have some problems.

  1. the central image is resized in dreamweaver, you really need to edit the image in a graphics program to make the actual size to use.

  972px × 611px (scaling to 316px × 237px)

  2. you should not use spaces in filenames, for example: (signs of average percentage of spaces in the file name).

  http://www.uniquehomedesigns.NET/images/paint%20jobs/paint%20pics/Tay%27s%20Room%20For%20W ebsite.jpg

  3. you have a rule in the CSS to:

  #column_container {
       float: left;
       width: 652px;
  }
  

  Yet, in the html code, you have the id without the underline:

  You need to fix it - and it will probably throw your page out I'm afraid... once again, you have to solve this problem if it occurs.

  Go back to the tutorial and recheck the code and compare it to what you have now.

• Photoshop image is get hidden in black or something

  I have a file that I flattened in Photoshop. It seems. I have lot flattened a group of the bridge and is the only one with this very strange problem. It is a document with a lot of layers and seen in Photoshop or any other way, it seems. The central image shows in the first, but he has blacked out all around her. If anyone has experienced this? I've manually flattened like a psd again as a tiff file and it is always odd looking at first.

  Thanks for your comments!

  Holly

  It looks like your channel Alpha (used to create the masking of the Ellipse) is entered and obscuring the background image. I'm doing my exports before import into Premiere directly of the Psalm so that I can have in my PSD Alpha channel, when I import a sequence w / layers flattened, the Alpha channel is not used. If I want to use it, I will Import_As_Sequence (in PrPro) and then get a calendar with all the layers.

  If the PSD PE with the Alpha channel, try to remove any Alpha channel, before flattening. If you are using this as a mask layer (the way I do), certainly do a backup with all layers, paths and Alpha channels, and then remove the unused paths and Alpha channels, flatten and make a Save_As using PSD and change of name, say Image_001_Flatten.PSD, or similar. Import only.

  Finally, when you are working with still images, you will be better served if you resize to the size of your project in the PS, before importing. Re-sizing to PS algorithms are better than those in PE or PrPro in my opinion. Also, you will not have overhead to work with great stills. This can cause endless problems of resources and may even lead to an all black or all green screen to the NLE programme. If you plan to pan a zoomed image, it's going to be bigger than the size of your frame, but should be barely big enough to make casseroles. Steve Grisetti recommends size max 1000 x 750. It is a very good number to use as the maximum I re-size to exactly what I use for most of my photos is smaller than that. Let PS this resize for you, you can improve the final result by a degree.

  If the Alpha channel is still a problem, after using my method Flatten and Save_As above, join one of your. PSD (shaped over, just before you import) and e-mail it to me. My e'dress is in my Adobe profile. I'll be happy to study it for you and find the exact problem. Also, try the re-sizing. PS, I have an Action to do the re-sizing, usually on a DVD NTSC 4:3 card. and just do a batch on a folder full of still images. I can treat 100 + files in moments. Then I import into first.

  Good luck

  Hunt

• Ratio of peak and of Swap Image behavior

  Alrite guys, iv been picking up my skills in web design by developing my own site and as part of the design of this iv a gallery with thumbnails encircling a central image. now iv used the swap image behavior to change the thumbnail to the large central peak, unfortunately the pictures are that extends up to the limit of the bracket, is their anyway to fix the ratio first photos use so they come in their original size, rather than lie beyond the original?
  
  See you soon
  
  Dark

  You can do this in many ways of means-

  1. do not use swap image: use show/hide layer. Having the acting
  image in a hidden layer that appears when the trigger is "tickled". Using
  This method, you can have images that are any size.

  2 use the swap image, but delete the dimensions of the original image tag,
  for example, change it.

  on this subject.

  Now when replace you in your offsize image, there is no predefined to size
  it to change. Be aware that this method may well result in an unpleasant
  and undesirable 'redevelopment' of your page layout as it adapts to your
  the new image dimensions.

  3 filling the small image with background color on all sides while
  all images * are the same size *.

  4 use a behavior of SetTextofLayer to change the reference to the image in a layer
  positioned so that it will show the magnification desired in the right
  place.

  5 use the PVII ShowPic extension - http://www.projectseven.com/

  Make your choice...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "Dark7722" wrote in message
  News:fusck6$OF2$1@forums. Macromedia.com...
  > iv got is not the large images are reduced (am gladly
  > culture
  (> them to fit) but the smaller images stretched horizontally
  > rectangle for much a large vertical rectangle, their a different form of
  > the
  > central to image initially
  >

• Swap image in a target? need advice

  I added a swap image behavior in two of my images (in my header image) and the image to the center of the page
  they have different pictures (2 pictures of permutation in the header and 2 images, exchanging the central image images). is it possible if they soar (turnover) to the image in the Center it will also trigger (share too) the header image?
  Sorry for my English.
  

  WOW Thanks a lot! That's what I'm looking for! :)

• Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

  Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

  Hello stevesch

  first see : problem with Firefox going transparent troubleshoot and find a solution

  then with patience to see:

  questions/940393

  questions/940389

  questions/940374

  questions/940377

  questions/940384

  questions/940395

  Thank you

• custom scaling button problem

  Hi, I'm trying to customize some controls, but I have a problem with the construction of a button. I replaced the central image by a more realistic appearance and now I want to change the scale to better understand my button again, but I can't put across the 'ladder' after I want to be able to better run the needle and I can't choose the position of the needle. I am attaching the file so you can view and maybe help me to make this more comfortable button thank you!

  to customize your Ctrl button, click on the 'key' to display the icon.then of "clips" you can do what you want with the image or the button of properties, including the streching the balance to make pivot 360 degs, maximum range, no ticks, ticks, etc... BTW, reorganize tab is practical by placing objects to the front or the rear of several images

  

• Settings of the Graphics Options: How can I prevent them background stretching?

  When I right click on my desktop wallpaper > Graphics Options > adjustment panel > fullscreen without border, the window is stretched to use the entire screen.  How can I do not tense?  If I graphis options > panelfit > central image, I get two thick borders that are not used at all.  How can I change failing?

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• The upgrade of the plant of the UCS 1.0(1a) to 1.1(1b)

  I followed the steps described by Cisco in the UCS Central upgrade and installation guide:

  Step 1	If necessary, restart the virtual machine and change the boot options to boot from the CD-ROM.
  Step 2	Mount the ISO Cisco UCS Central image with the virtual CD/DVD drive.
  Step 3	In the Central Installation of Cisco UCS menu on the ISO image, choose upgrade existing Cisco UCS Central.
  Step 4	Once the upgrade is complete, of the Cisco UCS Central ISO image from the virtual CD/DVD drive.
  Step 5	Restart the Cisco UCS Central VM.

  However after having mounted the ISO of the UCS Central and reloading image of the virtual machine, I never see the UCS just the standard newspaper central installation menu on the screen.

  Anyone got through UCS Central 1.0(1a) to the 1.1(1b)?

  Hi Paul,.

  Yes, the above process works very well. Have you changed the boot order to make sure that it starts on the CD/DVD?

  Also can ensure that the uploaded image is correct.

  . / Afonso

• Duplicate group around oval

  I want to duplicate a group around a path similar to a Crown, here's a picture to show how things are going.  The central image in the rectangle has some forms, I want that group, moreover, the group will not have a rectangle autour Forms duplicated similar to how the Crown, the Crown as in, Crown Princess or King?

  

  Put them in a row.

  Make a symbol

  Apply to a 3D cylinder

  Hide geometry

• Lightroom to photoshop panorama does not work properly please help!

  I do an online tutorial about editing a series of way milky way photos in lightroom and their fusion in a panorama in photoshop. I followed the instructions exactly as they are in the video, with the same settings, but when my panorama created layers (?) are not properly mixed. I don't know what I am doing wrong, or how to solve this problem, since I am quite new to photoshop!

  I have synced settings in lightroom, choose "change in" and then "merge to panorama" in photoshop. Once it has opened in photoshop, I left the settings on 'Auto' and 'mix images ".

  I hope someone can help. So I'm back on this whole photoshop thing and end up still very confused!

  

  The Photomerge in Photoshop script, which is what you are citing here, can be divided into its essential components - Edit > Auto align first, then Auto Blend. Try this just to check if the basic features are there.

  For this you need to have files stacked like layers in Photoshop and all selected layers. Put the central image at the bottom of the stack, it's the other alignment to.

  It could be this mixture does not work because you don't have enough overlap from real image data. Yes, there is much overlap in the area here, but white spots on a monochrome background may not be enough, especially if the noise starts to compete with the stars, or the stars are slightly out of alignment. So try another game also.

• ICH will be in einem grossen Bild furs Web interactive areas create, wo ein Bild hochpoppt und bei klick auf eine website führt dann. ICH weiss nicht, ob und leider mit welchem Adobe program so something bewerkstelligen kann man. Bin für alle thankful tip

  ICH will be in einem grossen Bild furs Web interactive areas create, wo dann bei Klick ein Bild bei klick auf eine website führt und hochpoppt. ICH weiss nicht, ob und leider mit welchem Adobe program so something bewerkstelligen kann man. Bin für alle thankful tips. Am am unter PC Windows 2010!

  It is not clear to me if you want help creating images in Photoshop.  Or you want to build a web site with a photo gallery.

  You can build your website with sensitive Dreamweaver & Bootstrap page layouts.  Then add a Bootstrap for images carousel component.   See this link:

  ALT-Web Design & Publishing: customization carousel of the Bootstrap

  Nancy O.

• Update View 5.0, where can I get 2.7 composer to?

  Is it just delivered in connection server .exe?

  Before our composer as ran on our server for VSphere, it seems odd to set up a connection to the server of 400 MB on this server, so our normal/security file servers connection...

  It is part of 'View Manager 5' to the Premier or Enterprise bundle of the Office product editions view.

  You can get off the beam above and download only the element View Composer if you wish, as below:

  VMware View dial (263 M)
  Separate installable component for the provision of desktop computers linked clone in view of a central image master Manager. Build 481620.