How can I create a temporary landing page that redirects to the homepage

Similar Questions

• How can I create my own template pages, to print a 4-page newsletter on both sides of the tabloid-size paper?

  How can I create my own template pages, to print a 4-page newsletter, using both sides of the tabloid-size paper?

  The finished newsletter should be a folded booklet: a piece of 11 x 17 paper folded to form a 8.5x11 "booklet". This clearly means pages 1 and 4 should be printed on one side of the tabloid sheet and pages 2 & 3 on the other.

  I can't find such a model in the Pages.

  There is no such a model, so you'll have to make your own, using a spread on presentation of your newsletter.

  Use shapes, images and text boxes to position available for your model.

  You didn't say what version of Pages that you are using but if it's Pages 5.x, it has no text boxes related so this will make it difficult and it's going to be a lot of manual work.

  Peter

• On a flyer, I need to produce black and PMS color. How can I create a PMS color (instead of something on the color wheel).

  On a flyer, I need to produce black and PMS color. How can I create a PMS color (instead of something on the color wheel or RGB)?

  It depends on the application. You use an inDesign application of PAO as Quark XPress, or something else?

  Many consumer apps is not able to output CMYK or specific pantone color combinations.

• How can I create a slide show 100% width, but have the caption in different positions for each slide.

  How can I create a slide show 100% width, but have the caption in different positions for each slide.

  There is placement of the legend only one for all the images in a slide show.

  The slideshow widget is specialized to create slideshows of the image. The widget of composition is a much more flexible widget which allows any combination of images and text in the trigger containers or containers of target of the widget. A widget of composition could be used to create a slide show with several legends by image and/or legends of different places for each image. The disadvantage of the widget of composition is that, due to the nature flexible widget, very little is automated for you and so it is much more intensive work to create a slideshow of images using the widget of composition.

  Thank you

  Sanjit

• How can I create a new master page with a different set of pages for the menu bar?

  I want to create a new Master Page that could be used for a different set of pages with a different menu pointing to other pages...

  For example:

  Master A to include a menu for pages:

  Page 1, Page 2, Page 3,

  Master B to the guests for the pages menu:

  Page 1, Page 4, Page 5...

  Maybe I would also do Master C and D with a bar of menus different total...

  But how can I isolate the menu bar from the rest of the pages that I don't want it?

  Right click on this page that you want to isolate > menu goto option > exclude from the menu.

  Hope It could help.

• How can I create an Adobe Reader file that I can put my downloads of my emails?

  How can I create an Adobe Reader file so I can put my recipe from various sites downloads?

  To create a folder for * any * purpose, in 'my computer, go to where you want the folder to be and right click here. Choose new | Folder, and then type the name you want for the folder.

• How can I create an eyebrows in file menu and save the option?

  How can I create a menu of file eyebrows, if I used my user to choose an image from the PC.

  And how do I backup my user settings? (this is application is going to be on my pc users only)

  You can launch a file with FileReference selection dialog. You can save the settings using a SharedObject (like a cookie).

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=17_Networking_and_communications_7 .html

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=lsos_3.html

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=lsos_5.html

  If it is a Flex application, you can select a file from the local computer and send it to the server, you will not be able to open the file in the Flex application, because of the security sandbox.

  If it is an AIR application, you will not have this restriction.

  If this post answers your question or assistance, please mark it as such.

• How can I create a series of blocks of text using the Excel list values?

  It is first of all, the first script I am trying to write from scratch. I'm completely green at the script and I picked up a few bits of ID Adobe scripting guide, but nothing has really stuck still relating to this particular goal.

  My supervisor maintains a master list of advertising space, with the name of the account, is the width of the space, and how space is the height, in an Excel sheet. These spaces can number in the hundreds, and I'm stuck manually drawing a rectangle for each space, which takes a lot of time.

  I would like to create / helped to create a script that will take these values and "magically" to draw these spaces in the form of blocks of text, with the width (in columns) and the height (in inches) defined by the values in the main list, as well as the name of each account in the subsequent text frames.

  The script didn't necessarily need to be able to pull the values directly from the Excel sheet; Can I transfer a file text if necessary, or directly in the script, values he change because I need it. A great thing (if she is not able to pull directly from an Excel sheet) which is the number of spaces a week changes, and so do the accounts and the width and height. Accordingly, it would be ideal that values of the sheet could be modified easily, in order to create a new set of spaces as necessary.

  Positioning for each space is not crucial, only the height and width. If they were all on top of each other on the same page, it is a result for me. The main idea is to not have to draw them all manually, one by one.

  For me, this looks like a command, but I hope that some experienced there Scripting Guys can help me, because I want to become experienced as well.

  Thus, the TL; DR version:

  -Script to draw a series of text blocks.

  -Size of the text boxes should be defined by the values width and height of spreadsheet Excel.

  -Text blocks must have the account name as content (from account in the Excel worksheet names).

  -Accounts, width and height changes every week in the Excel sheet, so must be relatively easy to exchange all values.

  -Width values on the Excel worksheet columns. It would be ideal that the script could turn those numbers into multiples of columns as necessary.

  -Script (optionally) can take values directly from Excel sheet.

  -Script (option) can set the fill color for the gray text frame. (If it works as I think, I could just select all the resulting images of the text myself and put them all to grey at the same time... I'm not lazy as )

  Thanks in advance to anyone who can help in any way possible, even if it's just a little push in the right direction. This script will save 1 to 2 hours of boredom every week.

  Look like the perfect thing for the InDesign scripting.

  I copy content from Excel to a text file, for a format easily read in InDesign, and there will automatically be a TAB for each 'cell', just using copy and paste.

  Here is a piece of code, perhaps you could go on with (the addition of variable to change pages and the location on the page and other things).

  The readFileLineByLine function, can be easily reused with any function using "recall". You simply tell the function what you want to be executed for each line of text that reads:

  const COLUMN_WIDTH = 2; // Define the column width in inch
  
  var pageIndex;
  var textFramesExported; // not implemented.
  
  // Add a new dokument. Set myDoc to app.activeDocument to use
  // the current document instead of creating a new one.
  var myDoc = app.documents.add();
  
  // The doSomethingWithTextRow function is called upon for every line of text read.
  readFileLineByLine('c:\\test.txt', doSomethingWithTextRow);
  
  function doSomethingWithTextRow(row){
      // We expect the text line to be TAB separated (\t = TAB). We get that from just copying the contents of an
      // excel file into a text document.
      var cells = row.split('\t');
      var companyName = cells[0]; // The Company name in the first slot of the array
      var width = COLUMN_WIDTH * cells[1];
      var height = cells[2];
  
      // Create a new text frame for every row handled
      if (pageIndex==undefined) pageIndex = 0; // Count up when you have exported a number of texts, I leave this for you to do.
      var newTextFrame = myDoc.pages[pageIndex].textFrames.add();
      newTextFrame.contents = companyName;
  
      // The text frame is created in the top left corner.
      newTextFrame.geometricBounds = [0, 0, height + ' in', width + ' in']; // Top, Left, Bottom, Right 
  
      // You might want to move the textframes to other positions, keeping track of how many you put out per page.
      newTextFrame.move( [10, 10] );
  }
  
  function readFileLineByLine(path, callbackFn){
      var myFileIn = new File(path);
      if (File.fs == 'Windows'){
          // This was probably added to recognize UTF-8 (even without its start marker?)
          myFileIn.encoding = 'UTF-8';
      }
      myFileIn.open('r');
      var myEncoding = myFileIn.encoding;
      try{
          if (!myFileIn.exists){
              throw('Missing file: ' + myFileIn.fsName)
          }
          var ln = '';
          while(!myFileIn.eof){
              // Read the lines from the file, until an empty line is found [now as a remark].
              ln = myFileIn.readln()
              // if(ln !='' && ln!='\n'){
                 // Call the function supplied as argument
                 callbackFn(ln);
              // }
          }
      }catch(e){
          alert(e);
          gCancel = true;
      }
      finally{
          myFileIn.close();
      }
  }
  

  The file in C:\ in my example was recorded in UTF-8 format and looks like this (showing hidden characters):

  

  Post edited by: Andreas Jansson

• How can I stop: 1) scrolling ads/info that remains on the page, even while I scroll down to the bottom. (2) new side tabs that appear at the end of the articles to tease the next articles?

  I have two questions. In the past months, some sites there are ads or facebook/twitter links that scroll and remain on the same page that I scroll down. I find distracting moving images and want to stop them. How? I saw another development that I get close to the end of an article, two tabs appear on the left and right of the screen who tease article previous and next. These tabs appear often on the top of the text of the article I'm currently reading, making it difficult to finish the current article. How to stop these tabs?

  for 1)
  Try using an extension "ad block", as a first step.
  Click on > > AMO search for "ad block"

  I use this one - https://addons.mozilla.org/en-US/firefox/addon/ublock-origin/

  for 2)
  You can try to use this extension - https://addons.mozilla.org/en-US/firefox/addon/umatrix/ - too complicated for me, I rarely see these stupid teases 'previous' and 'next' and my screen is wide enough so that they do not cover any text I read.

• How can I create a background gradient which does not affect the readability of the words in the foreground?

  

  Note that the words seem to disappear as the blue becomes more important?

  How can I fix it?

  In addition, since I work more than 30 plans, is there a general framework that needs to be changed?

  Furthermore, this gradient was created using the gradient tool, and is therefore not part of the background.

  Under file-> Document Setup, I found that you can create a background Uni but see no options for a gradient fill.

  I would appreciate help.

  I'm like your gradient is above the text.

  Select your gradient and the hit Shift + Ctrl + [ ]

  This should send your gradient to the back behind the text

• Adobe Captivate 7 - How can I create a Pop Up window that I can use as a print, warning or something else?

  Hello

  I've produced an e-Learning in Adobe Captivate 7, which consist of a vertical menu and a horizontal menu. The vertical menu on the left of the screen is the table of contents for e-Learning. It consists of all the themes of the small horizontal learning e - Learning.The is located on the upper side of the screen. This menu contains menu options such as 'legal' and 'warning '. They are textlinks / hypertext links. How can I join, it will open a pop-up window on the e-Learning after clicking on menu "imprint" or "warning? The pop-up windows should have the same design as the e-Learning for himself.

  Thank you very much for your answers!

  That would be my approach:

  • Create all objects in the pop-up window on the first slide, group them (Gr_Popup) and their time for the rest of the project, Place objects on verified top. Be sure to include the X button, which should be a button of form because a normal button cannot be programmed for the rest of the project. A form is also a text container, it may not be a problem.
  • Create a tip action "Mount" that you can run on enter for each slide to hide Gr_Popup, tip even action can be used for the X button. You could create an action as well, with one group setting. Depending on the setting of the slide, perhaps, it may be necessary to add the Continue statement for this action if used on enter. Don't need her for the action of the X key.
  • Use another button of form for action "to be clicked to display the context menu. For this one, you have the choice:
    • on the master slide (make sure you have model objects of slides on top for daughter master slides), given that you don't need to control (show/hide) button by any action
    • or also on the first slide and timed for the rest of the project
  • Create another advanced (or shared action) with the statement "Gr_Popup Show".

• How can I create something like this... See the link

  Please see an example of a typical newsletter at this link: http://kW.com/OutFront/index.php?issue=may-Jun

  I really want to learn to do it (do the pages turn, have a menu visible in the background, etc...).  And, if possible, I would also like to be able to insert links in the document that take the reader to another location in the document (for example, links on a Table of contents page that brings the reader to a place in the document).

  Where should I start?  I have Adobe 8 Standard.  Can I first create the entire document in PDF format and then transfer on in InDesign to finish once I have the content?  (I just started learning InDesign, if I'm not even too quickly on this issue.)

  I could really use help and advice on that!   I'd even pay a tax of tutoring if someone would be willing to lead me through the steps I need to do!

  If you can help, I would really appreciate it.   Thank you!

  lablovr (at) gmail.com

  Your options are

  (1) you can use a service provider which converts your PDFS into flippage magazine as in your example, most of them are commercial. Usually, you pay some question of costs/published or that there may be some monthly payments so... They place your magazine in their own special server and give you a link to your Web site.

  (2) you can create your flippage magazine out of InDesign CS4 as mentioned Scot. If you do it directly from InDesign, it s very easy to produce, but there is no element of navigation such as zoom, go to the next/previous page etc.. You can do some of these elements of InDesign layout the buttons and links hypertext, but that s of your time.

  You can also view an add-on for InDesign called eDocWorkflow. It automatically brings a user interface to your SWF files after exported them from InDesign CS4: http://www.prepress.fi/eDocBrowser

  West trial to test...

• How can I create a sharp corner to an anchor with the pen tool?

  I can achieve this effect by fluke sometimes if I move the anchor point, usually it is when two paths come together at an acute angle.

  How I always do I get this effect if?

  Maybe you need to change the limit tab in the stroke Panel to get a sharp angle like this:

  

• How can I insert images of full-width that reach until the edges of the browser window?

  I would like to insert pictures full-width that reach until the edges of the browser window. When I try to do and break the boundaries of the image to the absolute limits of the page in edit mode, you can push the image back to the borders of the body in preview mode.

  
  I can do rectangle normal blocks full-width, but no pictures.

  Who can help me?

  1. Create a box, and then click the '100% width' along the menu bar icon to define your area to scale to the width of the browser.
  2. Import an image in the box using the parameters shown in the second picture,

  

  

• How can I get Firefox 4 to recognize that I have the latest version of Adobe Flash Player

  Firefox 4 refuses to play video clips. I get a box telling me that I have the latest version of Adobe Flash Player. I just downloaded 10.3 and is yet to play video clips.

  You do not have Flash installed for Firefox. If you did you would see "Shockwave Flash (version number)" under modules > Plugins. You can see the Plugins reported with your question; Click on 'more system info... '. "to the right of your original question.

  There are 2 versions of Flash, a single IE (ActiveX version) and for most other browsers like Firefox (plug-in version). You must update each individually.

  To install or update Flash:

  1. using Firefox download and save Flash from this link (save to your desktop; easier for you to find): get.adobe.com/flashplayer
  2. When the download is complete, close Firefox (click Firefox > exit OR file > exit, if you use the Menu bar)
  3. Click or double-click the file that you just downloaded
  4. on the left side of the installation window, place a check in the box "I have read and agree."
  5. Click the Install button at the bottom right of the installation window. It comes on after you put the check mark in the previous step
  6. Let the complete installation; It's fast
  7. using Firefox to test your installation of Flash here: http://www.adobe.com/software/flash/about/
  8. for IE, repeat the process, but use IE to go to the site in step 1.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox