How can I create a video clip with audio re-bound?

Similar Questions

• How can I mix two video clips where they join together in a movie?

  Hello wonderful movie spirits, decision-making

  I'm working with Adobe first 6 on a Windows 7 computer.

  How can I mix two video clips where they join together in a movie?

  I know how to place two or more video clips together in the same movie, but how can I give them a bit of a mixture of just where they join?

  I have a PDF manual and the instructions of the built-in web browser.  In the instruction manual to the "Chapter 7: layering and Compositing", he talks about the transparency of a video sequence and I understand that... but I don't want to do one or the other video clip transparent anywhere except where the two video clips are joining with maybe a bit of overlap.

  I would like to make a little blur right where the two videos are joining the middle... is it possible?

  Thank you

  Digi

  AHA that kind of mixture.

  6.5 have not used in a time loooooooong.

  It's so memory, hope I get this right.

  Together the two each other clip

  Make a hidden in Photoshop and overlay it on the two clips.

  Go to the transparency settings and the value of the top 2 video clip touches Alpha.

  Screendump to mast:

  The right side is black just for the forum, but should be transparent.

  

• How can I transfer a video clip from youtube to Windows Media Player?

  Original title: transfers.

  How can I transfer a video clip from youtube to windows media player

  Hi john331,

  1. what version of Windows Media Player are you using?

  2. What is the format of the video file?

  (a) you can use a third party downloader to download the video file on your computer.

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  (b) thereafter, try to play the video in Windows Media Player.

  Hope the helps of information.
  Please post back and we do know.

• How can I place a video clip in CS6 in an irregular shape

  How can I place a video clip in CS6 in an irregular shape please

  Do the white and then use a matte.

• How can I add a video clip in the vertical hole above my 360 panoramic video?

  Howdy.  I have a video camera that makes panoramas at 360 degrees in full motion; the field of view is 360 degrees horizontally, by about 15 degrees above the horizontal plane and about 55 degrees below the plane.  When I discovered this video in PP or 360 YouTube, I can see a coil of torus on the POV, horizontally and black space directly above and below the POV.  Now, I would like to add video in this black space - but when I try to shoot a video in the source viewer, video gets stuck on one end and wraps completely around the POV (as the panorama does when it is not running).  How can I put a video element (or both) the holes in the top and bottom black and remains "flat" or unpinched?  Copied_tilt.zip - Google Drive

  Hi dede,.

  Premiere Pro can display only the content of the RV, not create it. I think that you need an app that sews VR videos like this one: Kolor | Autopano Video - Video software

  We will hear what the community has to say.

  Thank you

  Regalo

• Can I create a video overlay with transparency using Premiere Elements 3.0.2?

  I bought some video stock with graphics to use in a slideshow using Photodex ProShow Gold. It's the video. I am trying to create a video overlay by transparent white background. I use Premiere Elements 3.0.2. I can use the Chroma Key effect on the video and set the similarity to remove the white background, but I don't know where to go from here. I did a forum search, but couldn't find what I need. Some Internet research, I was able to determine that not all video formats support transparency or the other, so some tips on the best format in which to save the finished clip would also be useful. Thank you very much!

  You can certainly use the Chroma Key video effect for fact a video on a transparent upper trail, prairiegirl.

  Is that what you try to do?

  You can, however, export video to Premiere Elements with alpha - or transparency - in the video, if that's what you try to do it.

  This feature is available in After Effects. However, it is a much more powerful and more expensive program.

• How can I replace the same clips with the same interval of time (same settings)?

  Dear Adobe Premiere CS5 Forum,

  I have the following problem, and I would look forward to receiving solutions:

  As I couldn't cut my video with clips in avi codecs (it is very difficult to cut in avi codecs, except that you have a very fast computer), I converted my raw clips in lower codecs. Then I cut my video in low quality codecs. My video is now ready to export.

  But before I want to export my video, I need to replace all the clips in avi codes so that my video is in good quality.

  Now the problem:

  How can I replace the clips (poor quality video codec codec avi), in order to have the same clips in a different codec always the same interval of time. I want the replaced clip immediately have the same interval of time.

  For example: a raw whole clip takes 2 minutes. But just a part / interval of the clip (from 01:00 minute 01:10 minutes) is shown in the video. Now I want to replace this clip with the same clip in avi codec. But it must be the same interval (from 01:00 minute 01:10 minutes).

  I tried to replace a clip. But they each have a different time interval (the lower quality clip is from 01:00 to 01:10 minutes and if I would like to replace the same clip in avi codec is the time interval between 0:00 to 0:10 minutes).

  How can I replace the clip with the same interval of time?

  Thanks in advance

  Leonardo

  Hold down the Alt + Shift; It is Shift that maintains the reference timecode. In addition, this will work only if your proxy clips contains timecode. If they all start to 00:00:00:00, this will not work for you.

• How can I activate embedded video clips in a sprite sheet?

  I have two movieclips nested in another video clip.  For example: I have a clip of a bird flapping its wings, without moving anywhere.  Then I have which nested in another video clip in which the bird is interpolated movement across the screen.

  Lt

  I want to get the entire sequence exploded in images on a sheet of sprite (basically I want what images of the SWF resulting look like when he plays).

  
  How can I do this?  It would be great if the generated sprite sheet could do, but all this I really need is a way to reduce a complex set of clips nested within their States of play-time.

  Change the instance of stage of the two movieclips incorporated in the chart. Then you should be able to export the external movieclip as a single spritesheet.

• How can I sync the videos taken with an iPhone to an iPod nano

  I want to sync the videos taken with my iPhone to my children your iPod nano. The videos are stored on my iMac in the Photos app in a specific album.

  I tried using iTunes and synchronization of the picture with this particularly chosen album, but nothing has been synchronized. There is no error messages or warnings, just nothing is synchronized.

  I know I could manually importing the video into iTunes and sync as films, but there should be an easier way to do this, right?

  I think the method you mentioned is how you need to do.  In iTunes to sync iPod movies, you configure settings from iPod movies screen (to select the movies you want to synchronize).  Settings of the iPod screen photos is for photos (image files).  Movies do not appear on the screen of the parameters of the iPod movies , unless they are in your library of movies to iTunes.

• How can I create a LabView driver with vi existing driver?

  I am trying to create a driver for LabView 1553. I received the previously created driver files LabView 1553 of the manufacturer. I also used tools-> Instrumentation-> create an Instrument pilot project to start a new project. I used a new model and the block is now under Instrument i/o. I moved all the files previously created 1553 driver in the data folder in the project located in C:\Program File\National Instruments\LabVIEW 8.6\1553Data\Public\Data.  I don't see any of the vi driver is available to the title of the Instrument I / O-> 1553Data. How can I make these usable vi?

  Also, I'm not sure my files folders should go in (configuration, data, utilities, etc.).

  Thank you.

  I thought about it. Here's how to insert the vi in the palette:

  Tools-> Advanced-> Edit Palette Set

  I went into the data section and right click. There is a possibility to insert VI. I clicked on it and took my vi to insert and now it manifests.

  Thanks for your help.

• How can I watch a video clip without slaughter and reload the buffer

  When you try to watch a video clip... site... it will start and then stop and start again... and so on

  Looks like it can only buffer alittle at a time, plays a short song and stops, play a piece and short stop... and

  Hello

  Normally the speed depends on your internet connection, Buffering is simply the process of downloading the documents in the file and now it until it can be displayed.

  You can try to configure Windows Media Player:

  1 open Windows Media Player.
  2. right click on the title-> Tools Bar-> Options-> Performance tab.
  3. set the desired changes in the section network buffering.

  Buffering is simply storing the content before the media begins to play. Some will have noticed a short break before the multimedia readings, and it's just data backup application in the hope that small network dips will be not noticed. The ultimate solution is, of course, get more bandwidth. If you are tiring to watch an HD video on a connection by modem 56 k no degree of buffering won't help you unless you download the entire video clip before you play. Get more bandwidth means generally pay your ISP more money for a better plan.

  I hope this helps...

• How can I create a video Viewer full screen?

  You want to create a video Viewer full screen like the one used here: Airbnb (video humanity).

  I want to be able to press a button and for my video to play in full screen

  Thank you

  Ali

  You can use the composition for this, insert video code or widget in jQuery containing: trigger action.

  Video Lightbox (Composition Widget) by Christine Ricks

  Thank you

  Sanjit

• How can I create a wiki page with Adobe Muse?

  I need to create a wiki for a competition, I am, and I want it to look nice. I need HTML code to create the wiki, and all code must be hosted on its website. They have a box that we are supposed to place the HTML code. When I use the code that Muse has exported, there is no CSS. How can I get it work? Thank you

  Hello

  It's something that I recommend because you need to completely restructure the HTML code of the page to do this. You must be technically advance in coding. It will be like the re-write of the code and may even break the code. It is very likely that some features may not work properly.

  Kind regards

  Aish

• Working with video clips with audio 5.1

  Someone sent me a video file with 5.1 audio.  I'm going bonkers trying to figure out how to alleviate individual channels in this file.  My final draft stereo and I I want no sound from the rear speakers in my final mix.  I can't understand what search terms will lead me to the answer in the first help file.  Can someone help me with this one?

  J. D.

  You should be able to click with the right button on your source file, then select Edit-> Audio channels

  

  And then enable or disable channels that you want to use:

  

  Please note that this can be done BEFORE use of the clip.

  Hope that helps!

• When I drop a second video clip with audio in a sequence, how is the 2nd clip will not display or launches its audio track?

  I hope someone can help me with this.  I've just updated to the new CC first pro and when I drag a clip that has audio it displays correctly only audio in the audio track, BUT... when I drag a clip (or even the exact same clip) in the sequence of the audio track is not displayed and cannot be heard or published.  Just to double check, I did a new project, tried to load these two clips in reverse order and it worked the same way.  Only the first loaded track will show that it is the audio track.  When I create a new sequence by using the menus at the top specifically to test this, none of the audio tracks are displayed when the drug on the time line.

  I also tried to load the video in the window source first before I drag it down. Sometimes the source plays audio, sometimes it does not. Anyway the audio still does not appear.

  

  I hope that there is just a shoddy setting, I've turned on.  I know how to do Prime Minister rip the audio output and is it she's own track after the fact, but the whole issue is speed and convenience, and I never had this problem in the old version.  Thanks much for any help.

  Check A1 left the lock.