Similar Questions

• How can I detect when the last container in my stream is full?

  I have a bunch of related containers which I am flowing text through. How can I detect when the text has filled a container? There's an overflowPolicy then I guess it can be detected.

  Hello

  I used this:

  private function IsOverset(textFlow:TextFlow):Boolean

  {

  var zeComposer:IFlowComposer = textFlow.flowComposer;

  var iTextLen:int = textFlow.textLength;

  var iNoController:int = zeComposer.findControllerIndexAtPosition (iTextLen - 1);

  return (iNoController is-1);

  }

  HTH,

  J.

• How can I detect the support version lower than 4.7 touchscreen

  Hi all

  I am developing an app for non touch devices with version 4.5 of departure and now will make the same application for devices supporting contact, so planned to use the Touchscreen.isSupported () - but it is available only from 4.7. But the app should take charge of 4.5, so how do I detect the device is palpable or not palpable in version 4.5?

  Thanks in advance,

  Kitty.

  You can use this code:

  new Canvas() {}
  protected void paint (Graphics graphics) {}
  }
  }. hasPointerEvents()

• How can we detect the action of "clicking outside of the dialog box"?

  When we have a modal dialog box, click outside of the dialog, its parent window, for example, how this action event can be detected? I want to implement certain actions in response to this event. Thank you!

  Here are some ideas for further research:

  You can first in the stage variable parent in the dialog box and then attach to events 'touch' here:

  scene.setOnMouseClicked (myDialog.mouseHandler,

  scene.setOnTouchReleased (myDialgog.touchHandler

  But it can work only if the dialog box is directly on top of the scene of the mother.

  If the dialog box is outside parent in any part you will probably need to work with the operating system.

  In windows, you will need to call some functions search for win32 if ' use java call win32 functions.

  Or, you can write a windows program that listens to the operating system event queue, then tcp to your dialog box.

  Many search results obtained: windows - how the message queue works in Win32 - stack overflow

  But then if your mac or Linux,...

• AS3 how can you detect if someone shoots their camera into the USB port?

  In AS3 if the SWF Gets a hold of the camera of someone successfully and they begin streaming video everywhere and everything, but then halfway, either they wiggle accidentally their camera into the USB port, or the camera just sort breaks down, or something like that, how can detect you on the user side?  I tried using event listeners and different variables of Mark also every five seconds, but none worked. any of the public properties of the camera or its events seem to be acting funny of all when something happens like that.  And apparently you can just keep analysis the computer for devices (for a good reason, I suppose).

  Is there something I'm missing here?  Is it possible to detect the copy of a user of a SWF file (PF or AIR, but much more important still FP) when their camera has effectively stopped as the result of something goes wrong, like them what she wiggling the computer by mistake?  If so, how?  Thank you!

  Run your code and disconnect your camera. What are the common properties of it? Stop your flow? To return only a framework of specific color? These things can be used to detect, but you are right when you say that you can not detect more than a loss of packets from a NetStream object.

• How can I detect a virus in my Mac?

  Hello everyone

  I think my Mac has a virus. Let me give you some details.

  Recently, I downloaded FileVault for my Mac (from the official Apple App store). Some users said that their Mac has slowed down, while others had no problem with him. I downloaded FileVault, and it actually sped up my computer, so this doesn't seem to be the problem, or at least, I don't think it is.

  Here's where the problem began:

  I plan to spend in Warwick, NY. So I went online to visit the official site of the city. There is a Facebook link that I clicked on. No problem. As I read the script, I noticed it below (do NOT click)

  Martin Filipowski McAfee antivirus warns that this page is a risk for malicious activity, see the report below:

  http://www.McAfee.com/threat.../site/default.aspx...

  Above this post, there was an article on New York State. I clicked on it and had no problem. It's the kind of an online magazine on what to do in Upstate NY. But when I saw the post above, that the link on the northern part of the State could be malicious, I panicked. I clicked on the link to learn more and discovered that there was a dead link. It is then that all my problems began. Here is what happened in detail:

  I started noticing that when I turn on my Mac (and now even my IPad) it takes a LONG TIME for the Internet (Pie) to appear. I have a secure network, (Optimum) and sometimes it doesn't. I am forced to use the Wi - Fi which is not secure. So, when in fact, I try to use the Internet, it may take up to 3-5 minutes for the page to come. After awhile, it starts to work, but he still drags, as if something is it holds. It's weird. Ditto my IPad. It was working fine. Now he begins to act like my Mac. It takes at least 5 minutes (if not more) to the Internet lights.

  How can I check to see if this link put something on my computer? Is it possible for me to see if my Mac has a virus? Help!

  Rachael

  rachaelfrombrooklyn wrote:

  I started noticing that when I turn on my Mac (and now even my IPad) it takes a LONG TIME for the Internet (Pie) to appear. I have a secure network, (Optimum) and sometimes it doesn't. I am forced to use the Wi - Fi which is not secure. So, when in fact, I try to use the Internet, it may take up to 3-5 minutes for the page to come. After awhile, it starts to work, but he still drags, as if something is it holds. It's weird. Ditto my IPad. It was working fine. Now he begins to act like my Mac. It takes at least 5 minutes (if not more) to the Internet lights.

  My guess is that if the MBA and the iPad have the same problem, you may have a router problem.  I suggest that you change it.

  If no success wait to come and advise you, an expert of router.  This is an area that I am not well versed in.

  Ciao.

• How can I detect dynamically new modules of the cFP-2200?

  Hello

  I'm working on a project that monitors the voltage using the cFP-2200 with any number of PSC-HAVE-102 installed modules. Each analogue channel PSC-HAVE-102 will correspond to its own state machine which tells you a central database.

  I want to create something that does not need to know how the PSC-HAVE-102 s settled in advance. At startup, my software must be able to detect all PSC-HAVE-102 s and dynamically create the State machines for each channel, if I have 1 I-102 (8 analog monitor channels), or the maximum of 8 installed (64 channels to watch).

  Right now, I can only understand how to the program for channels that are currently available by connecting to the module in its current condition and click/drag the analog channels in the project window. Is it possible to program for strings that are not there, but could be later? The application of this is to deploy the module on the ground and have the ability to add or remove I-102 s without changing the installed software.

  kgolden,

  Do you mean that the ini file will be correctly created only if I have the number I-102 s max?  Yes, you must have 8 I-102 in your project as part of the goal of the PSC.  Forcing him to be included in the. The IAK file and in turn to be defined in the .ini causes.  I think you can use the Project Explorer to add modules to the CFP, even if they do not exist physically.

  Is it possible to manually edit the file instead?  I think that it is possible to manually edit the .ini.  I don't know that NEITHER does not bear this manual change.  The question would be is there other on the CFP .ini files that contain references to the i/o modules installed?

• How can I detect a trigger missed (i.e. 2nd trigger arrives before the task completes)

  Is it possible to know if a trigger pulse has been failed, because the device is busy?

  To give a specific example:

  I use a NI4462 Board with digital triggers of falling on the PFI0 entry point.

  I have an external clock, exactly the 1 kHz square wave.

  On each falling edge of the clock, I (re) start a task than 200 times, samples (200 kHz).

  Normally, it works well (as long as I take care to keep the task, stop and start the task in a tight loop and not make too much treatment in 5 ms, which remains after the last sample).

  BUT, if something went wrong (think of the external clock running too fast 1%), the 2nd trigger would happen during the running task (say, on the sample of 198).

  The NI4462 (I think) simply ignore this trigger, because the task is still running, and I would miss out on a framework for data set, getting only the 1st and 3rd groups of 200,

  Is it possible to detect when this has happened and raise at least one error?

  Thanks for your help.

  P.S. I also worry about the 63-sample-delay filter: is there a better solution than post processing to cut the beginning of a group and on the end of the previous 63 samples? This works well, but it incorporates a timing glitch after the 63rd sample.

  Hello

  I can't imagine a way to solve this problem in your task to the DAQmx. This should be relatively simple in FPGA or maybe even in real time. I'll come if I invent something.

  You could check your trigger with a counter clock (just carry your meter with your signal of 1 kHz) and throws an error if it derives.

  Perhaps I could ask a little more of the context of this question - why do you need this architecture? I don't know why you cannot acquire just streaming samples - this can lead us to a different solution!

  I will mention that your schedules are very tight, as this 5 spare part is at best because I don't think that your sample clock is synchronized with the clock of your relaxation.

  In response to your question about the delay, can preload you the filter before your main acquisition to lose the delay?

  A bit like the solution described in this KB (http://digital.ni.com/public.nsf/allkb/F989B25FF6CA55C386256CD20056E27D?OpenDocument), of course you would have to set up your triggers properly. A trigger of reference might use with a size of pre-triggersample of 63.

  I hope this is a help - let me know how you go.

  Best regards

• How can I detect if the app is third

  Hello.

  I can use CodeModuleManager to get the list of installed modules.

  Can I use this to detect if the app, that corresponds to the given module, is third?

  Or do I have to use ApplicationDescriptor to retrieve this information?

  Thanks in advance!

  Now, I found a solution: http://supportforums.blackberry.com/t5/Java-Development/How-to-find-if-installed-applications-are-th...

• I installed Adobe flash 11.0 repeatedly and it will work for other browsers, but Moxilla do not recognize. How can I detect it?

  I have Windows 7 running on a new Dell Inspiron.

  Whenever I use the Mozilla Firefox browser - it says I don't have Adobe Flash installed 11.0. I know that I do because if I open explore all sites who need Adobe Flash work.

  I should prefer to use Mozilla - is there a way I can get firefox to recognize the Flash from Adobe, I installed?

  There are 2 versions of Adobe Flash:

  • an ActiveX version for IE only
  • a plug-in version for most of the other browsers including Firefox
  • On a Windows system, you must always update both individually.

  You don't seem to have the Plugin for Firefox installed version. If you did, in the Add-ons > Plugins you would see "Shockwave Flash (version)". If 'Shockwave Flash' is there and is disabled, click on the button "activate".

  Make sure that your Plugins often-> http://www.mozilla.org/en-US/plugincheck/

  • We know only the Plugins the more popular/used by this page
  • page detects only installed, activated Plugins

  Install or update Adobe Flash

  1. With Firefox, click on the following link and SAVE the download on your desktop, so you can find it later. Clear all of the items on this page that you do not want to download (i.e., "McAfee Security Scan Plus"):
     • http://get.Adobe.com/flashplayer
  2. When the download is complete, close Firefox (file > button OR exit Firefox > exit)
  3. Click or double-click the file that you just saved on your desktop
     • In the install window that appears, select the check box to the left of "I read and...» "to place a check mark in the box of
     • The button 'Install' in the lower right corner is now highlighted, click it.
     • Installation is quick.
  4. Launch Firefox and test your installation here: https://www.adobe.com/software/flash/about/
  5. To the update/install the ActiveX for IE onlyversion, repeat the process, but use IE to go to the site above.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• How can I detect or determine what hardware I have in my office?

  Is there a web page on the HP site where I can type my HP serial number and determine what equipment I have in my office?  I can't find a page like this on the HP website.  It's easy to do on the Dell site.   Also, if there are a few tools I can run to automatically detect the HW, that would be great.  I don't want to break the box to figure it all out.

  OK, the link says I can have one of the 4 possible different video cards.  Lame pretty if you ask me to HP.  With Dell, I can get the exact set of HW used when the machine has been built since my serial number.   Save me from having to break open all the boxes during the installation of things.

  Anyway, thanks, looks like I have to crack open my machines.

• How can I detect if a step has been ignored?

  In an application of C-Sharp, is there a way to detect if a step has been ignored once completed execution?

  ApplicationMgr.GetRunState () and ApplicationMgr.GetTerminationState () do not say if the execution was complete (Nothing ignored) or incomplete (1 or several steps skipped).

  I have to walk through the steps and use the Step.GetRunModeEx () method?

  Hi tlaford,

  You will still need to check each step, but I believe that what you try to do better with the use of Step.ResultStatus:

  ResultStatus property

  Syntax

  Step. ResultStatus

  Data type

  String

  Goal

  Specifies the status string for the step.

  Remarks

  Although you can set custom status strings, this property is usually set to one of the Proprietesde constants.

• How can I detect a "partial" transparency in an item by using the preflight profiles?

  Hi all

  I usually work with a software called Artpro (esko), and it allows to select a single element and set its transparency as "completely transparent" atributtes except for a concrete color/s, in which you can put zero value...

  Any preflight profile detect this items?

  At the moment I can select a transparent object (true/false)...

  Thanks and greetings

  Joan

  Hi all

  I finally discovered what happened.

  When you create a partially transparent element in artpro and set its transparency as "completely transparent" atributtes except for a concrete color/s (100% Pantone Warm Red, transp. Cyan, Magenta transp., transp. black and 0% Pantone Reflex Blue) and export a PDF, the result in Acrobat is that this object is detected as an object DeviceN, not transparent, because Acrobat includes 0% of Pantone Reflex Blue is current used .that object. Therefore, an element completed with two colors flat is a DeviceN.

  I used Pitstop to see the attributes of the element with the Inspector.

  Can someone confirm this info?

  Beef!

• How can I detect that a step has been forced to fail or have to spend?

  When I put in a single step to ForceFail and another step to ForcePass, and I run the test sequence, the ResultStatus is just "Impossible" or "Passed" without providing any comment that it was not a real test.  Is there a way to detect / document this?

  
  

• When I import pictures from my camera, the photos that were imported in the past are imported causing even many duplicates. How can I avoid duplication?

  Several months ago, the computer asked if I wanted to erase the old photos in the computer, but now it does not.

  Hi William,.

  Thanks for posting this question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what happens when you try to install .net framework 1.1?

  2. do you receive any error messages?

  3. do you have a security program installed in the computer?

  4. are you aware of any changes made to the computer before the show?

  The best way to get rid of duplicates of photos would be to sort the files by name, to compare and to delete files.

  There are also several third-party programs that you help find the duplicate on the computer files, and delete them. I suggest that you use your favorite search engine and look for the file duplicate, find programs.

  DISCLAIMER OF THIRD PARTY SOFTWARE:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful and provide us with more information on the .net framework for assistance. We will be happy to help you.