How can I erase the drive hard when I can't read the screen of the monitor?

Similar Questions

• How can I read or use the unallocated Partition?

  My external hard drive has two partitions. We're "Healthy (primary partition)", the other is "unallocated".

  I can see health as a disc but not the unallocated partition. How can I read or use the unallocated Partition?

  When I right click on the partition menu popup are faded/not usable.

  You can create a partition in the unallocated in disk management space.

  Right-click on the unallocated space and create a partition.

  If you have a partition on the disk using all the space you need to set as GPT instead of MBR.  Windows will not accept a partition of about 2 GB max on a game of MBR disk.

• How to replace a new drive hard satellite 1670cds

  How to replace a new drive hard satellite 1670cds
  do I have to remove the keyboard?
  wath is the GB limit

  Hi Theo,.

  HARD drive is mounted on your machine fest, and it is not easy to change. First you have to remove the keyboard, then view and top of page coverage too. If you want to do it yourself, be careful. If you do something wrong, it can be very expensive.

  It is not easy to say which is the limit of the HARD drive, but I'm sure you can use 10 GB with no problems. Try to contact the after-sales Service of Toshiba partner. Perhaps, they can give you specific information.

  Good bye

• How can I change my screen resolution of 1024 x 768, when my laptop is 1024 x 600 is recommended?

  How can I change my screen resolution of 1024 x 768, when my laptop is recomanded 1024 x 600?

  Hi joniquehall,

  In addition to Charlie post, see the following article for more details:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  In addition, if you do not see the desired resolution, it could be that you need to update the drivers for your video card:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

• HOW can I CHANGE MY SCREEN RESOULTION SUPERIOR WHEN HE SAID that HE has REACHED HIS LEVEL of RECCMENDED?

  HOW CAN I CHANGE MY SCREEN RESOULTION SUPERIOR WHEN HE SAID THAT HE HAS REACHED HIS RECOMMENDED LEVEL? HIS NOTEBOOK from FUJITSU, upgraded to windows 7 AND I NEED of THE RESOLUTION to BE in 1024 X 768 TO RUN a PROGRAM, BUT I can NOT GET IT HIGHER than 1024 X 600.

  Your model number of Fujitsu is probably under the laptop, without it, you will need to get the driver from Intel. The mobile intel (R) 945 express chipset has been around since 2005, so you may well be stuck with what you have. You can try looking at the advanced settings for the graphics card in the Control Panel, or via the office, sometimes, you can increase the allocation of memory with integrated graphics card, have a look at performance video on this page, when you get to the tab of the map which is where changes can sometimes be made: -.

  http://www.Dummies.com/how-to/content/understand-PC-graphics-display-adapters.html

  the example shown is for the dedicated graphics card, yours is integrated, but you should be able to cope if a choice is available.

• How much is a new drive hard hp product number is NP211AA - ABA MODEL P6112P

  My Device Manager shows my hard drive as a

  Drive SATA TOSHIBA MK6476GSX im do not know the size but in my drive C is about 575 f tools GB and my D is 20.1 and hp 99 mb. im not sure if im suppose to add anyone to the top or through the drive c only.  Im trying to contact hp to see if they could replace my drive hard when it goes too hard to use but id like a starting on that price, so I know not if its more wise to do things fixed or shopping for a new laptop.

  I have a

  Pavilion laptop 2123us g6

  Product B5A04UA number

  Windows 7 64-bit sp1

  If you have activated the link to parts store, I've included it should show hard drives available for your model and prices for your area. If you prefer to fix it as a repair, then telephone HP support, please use the following http://www.hp.com/contacthp and create a folder for your question. Once your case is created, you should get the number to use to contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Either by the way, if you have only one hard drive installed which is the normal case, the size of your hard drive will be the sum of all partition sizes as well as all space not yet allocated.

  I hope this helps.

• How can I fix my screen to be so 'jerky' when I'm scrolling?

  Original title: scrolling

  How can I fix my screen to be so 'jerky' when I'm scrolling?

  Hello

  1 are. what screen you referring?

  2 does happen with all screens?

  3. This should happen in Internet explore?

  4. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

   

  Method 1: Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Method 2: I also suggest you to install the updated drivers for the video card on the computer by visiting the manufacturer of the video card and check if it works.

  How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658

  Hope this information is useful.

• How can I download a screen shot to the page in question?

  How can I download a screen shot to the page in question?

  You can't attach an image to the first post which creates a thread. You need to add another post (second) to fix an image.

• My apple tv has been full screen but suddenly black bars apears on the side, how can I get full screen again?

  My apple tv has been full screen but suddenly black bars apears on the side, how can I get full screen again?

  Post a picture of your screen and the model number and brand of your TV.  Sounds like a TV problem.

• How can I read reviews of applications on the App Store for Apple TV?

  How can I read reviews of applications on the App Store for Apple TV?

  It is even possible to read or write reviews of applications on Apple TV?

  Access is not for the comments on Apple TV. You need to get the title in iTunes or the App Store on an iOS. Reviews of iTunes can often be found using your favorite search engine.

  TT2

• How can I return my screen to its default values after you run the Windows 7 color calibration?

  I decided to run the color calibration tool windows to try to optimize my monitor, but the quality came out worse than before. After trying several times and otherwise, to get a better picture I decided that I would just back to its default value. The problem is that I don't see an option for it. So, how can I reset my screen its initial values of before I tried calibration it?

  Thank you

  Using Windows 7 Pro 64-bit

  Windows (rstrui.exe) system restore would do it without data loss.

• The date system in the taskbar indicates the year, month, day (as in the army). How can I read the day, month, year?

  The date system in the taskbar indicates the year, month, day (as in the army). How can I read the day, month, year?

  It's weird, in my version (Windows 7 Pro), it shows much more than that.

• How to permanently erase the memory of Deskjet 3050?

  How to permanently erase the memory of Deskjet 3050?

  Hello

  A factory reset will all clear and out the box (except more):

  http://www.YouTube.com/watch?v=hrcwSOS_1P8

  Kind regards.

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I stop blue screen with stop error code (0x00000002, 0x00000000, 0x804e70ed)

  How can I stop blue screen with error code stop 0 x 00000050 (0xf05c371c, 0 x 0, 00000002 00000000, 0x804e70ed)

  If you are not real tied to the current installation of Windows - then a cloth and then reinstall are the best way to see if you can fix this

  Here's a suggestion on how to do a 'clean ': install
  [quote]
  For testing purposes, it is best to install Windows "clean".
  It is, basically, install the way that Microsoft intended (with the drivers from Windows Update).
  This procedure is for Windows 7, Vista is similar (but has 2 service packs)

  You will need your installation/recovery DVD (s) before you start.  Once you wipe the hard drive, there is no going back!

  1 back up all your data.
  It will wipe everything off of your hard drive, so what you want to keep should be backed up elsewhere.

  NOTE: If this is due to an infection, remember to analyze the data with current antivirus to another system to locate and remove malware.

  2. connect the system to the internet (if the system shows then disconnect from the Internet, do).

  3. use one of these free utilities to wipe the hard drive:
  DBAN ( http://www.dban.org/download )
  KillDisk ( http://www.killdisk.com/downloadfree.htm ).
  This will also remove the system recovery partitions - so the installation/restore DVD is essential!

  4 install Windows by booting from the installation/recovery DVD - DO NOT change any settings!

  5 visit Windows Update and get all updates

  6. check device for all unknown/disabled devices Manager - if there are unknown disabled devices, secure them with the latest drivers from the website of the manufacturer of the device (not the PC manufacturer)

  7 visit Windows Update and download the Service Pack 1 (normally under important updates).  Read these notes for installing SP1: http://support.microsoft.com/kb/2505743

  8 visit Windows Update and get any other available updates

  9 download, install and update a free antivirus, so it does not get infected during the test ( http://www.carrona.org/freeav.html ).

  If problems persist, then the problem is probably with your hardware.

  Warning: If you have an Asus motherboard, check the date on the file C:\Windows\System32\driver\ASACPI.sys.  2004/2005 is a problem, 2009,2010 is OK.  Updates are available on the Web from Asus site.

  Warning: If you have a Sony system, make sure that you do NOT have the 2007 version (or earlier) Extension of Firmware of Sony Analyzer (SFEP.sys).  To update this driver immediately!
  [/ quote]

• How can I get my screen to stop jumping?

  How can I get my screen to stop jumping?

  Hello

  If a PC make sure the monitor cable is tight on both ends.

  Start in SafeMode pressing repeatedly F8 repeatedly as you start - Panel configuration-Device Manager - view
  adapter - do a right-click - UNINSTALL - reboot the computer.

  If no joy they return to Mode safe mode with network and go to the Site of the manufacturer of the system (or the)
  the video device manufacturer's site) and look for new drivers (if no new re - install ones you
  now) - compare the versions tab of device - graphics - driver available card Manager.
  TIP - the system of sites of the manufacturer or the manufacturer of the device does not use their scanner - check manually
  for all drivers to ensure that you get the latest version.

  If not joy, then, you need the help of a real computer (no leeks and peeps store at a Best Buy or any other
  Department stores) or the system manufacturer's support (also ask in their forums, if it is for known issues) and
  Check-in with support of the device manufacturer and forums as needed.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.