TouchSmart TX2 1340ea card mother 504466-001
Does anyone have a diagram for the Touchsmart TX2 504466-001 motherboard?
Found that it chaps! The Council is actually a Quanta TT3 Soyuz 3.0 and here is the link...
Enjoy!
BTW I have no idea why he says: I am a student, I am an electrical engineer!
Tags: Notebooks
Similar Questions
-
Pavilion Touchsmart 23 F250 card mother upgrade?
Hi I have a question for the exprerts my HP has the following specifications in this link to the site of hp http://support.hp.com/us-en/document/c03791255
Can I put in a new motherboard, if so should I get new power supply currently I have the standard laptop to factory default power supply (portable type) allowing only 65w FM2 processors and what will happen if I tried to put in a 100w for example processor AMD A10 - 6800 k?
Certainly the AMD A10 5700 (Trinity) Quad Core APU. These are actually the APUs. I consider also hit the RAM installed up to 8 GB.
-
8200 elite format microtour, need of care technique for card mother/PSU
Hello.
I'm upgrading of the power supply in my Hp Compaq 8200 Elite format microtour.
The /PSU motherboard uses an archaic connector that looks like a connector 6-pin inline with to the (http://i20.photobucket.com/albums/b225/r4ch3t/Aux-connector-148x200.gif). But it is connected with 4 wires (red/white, white, green, purple)
To upgrade the PSU, I need to find a way to connect it to the new motherboard, but I can't find any information or datasheet for the motherboard or the power supply.
Motherboard:
SP #611834-001
DG #611794-000
PSEYU0JCY0W197
AS #611793-003
0J REV
POWER SUPPLY:
Model: PC9057
PART NUMBER: 611483-001
ALTERNATIVE NUMBER: 613764-001
Where can I find more information about the card mother/PSU?
What is the connector? It is standardized in some way?
What is the combo of tensions/soil necessary for the pins?
Thank you
Your question would be better served in theHP Enterprise business community. I highly recommend that you join the community and post your question there.
This time, do not forget and give identifying information more accurate than you did in this post. In the image below, you will see how what gave you as a product identifier can be confusing.
-
TouchSmart tx2-1370us: laptop found in the trash
Yes, found this laptop in the trash. Replace the power adapter, it turns very well. Problem is that the hard drive is a paperweight now. How to make a recovery disk? I get no option to order one of HP in the downloads section.
Thanks for any help.
Hi, @bullmecha :
The page for your laptop on the link below product specification shows it came with Windows 7 Home Premium 64-bit.
I don't see that you can order a recovery disc for this model online but you may be able to order them by phone.
Call HP at: 1-(800) - 474-6836
If HP does them, you can always get a game from this provider no HP on the link below...
http://www.computersurgeons.com/p-17159-recovery-kit-589307-001-for-HP-model-number-TX2-1370us.aspx
-
the upgrade card mother DM3-Pavilion
Hello
My 4 year Pavilion dm3, recently died on me. It's a little elegant machine, I wanted to wear around and who was always OK for occasional daily tasks. For these reasons and others, I would at least try to replace the defective motherboard and revive.
The model I bought is a dm3-1003tx exotic model (bought in Thailand, especially with a keyboard QWERTY/thai), with Intel SU7300 and discrete nVidia GeForce G 105 M graphics chip.
Given that the original motherboard is not easy to find (PN 584079-001, only a couple of bids on ebay of the Japan), can someone tell me:
-If it's OK to replace it with an another based SU7300 of motherboard (can be with or without the nvidia chip - I really don't need it).
-or even better upgrade to a motherboard of SP9300 based to get a performance gain? If so, should I expect any change (it looks that the consumption of energy and the frequency of the buses are higher with the SP9300 then maybe RAM...?)
Is there any tool available around compatible HP part numbers?
Thank you
No, there is not a matrix of cross, useful reference because it would be. I think that HP is simply too many different models and parts for someone to keep track of it all. HP Service is inspired by replacement with the same part number so their internal service people wouldn't even have much use for such a thing, just us end users.
Motherboards have the processor soldered to the and there is only a single part number for the fan/radiator Intel stated so I would say that if you replace your motherboard with it:
580663 001
with the SP9300, you'll be able to reuse your fan/radiator. In the case where you don't have it here is the repair:
All models use the DDR2-800 memory and accept up to 8 GB. Different motherboards all seem to have the same ports and such and will have the same anchor points. You could even theoretically install a card mother AMD-based, but this would require to reinstall an operating system, and I wouldn't trade an Intel processor for an AMD processor in any case unless AMD have been much cheaper. A Committee from AMD would also require a different radiator, however.
You can buy the SP9300 motherboard for $45 shipped on eBay:
The same seller also has the SU7300 for a few dollars less:
I bought a little of this seller and it looks like they have a lot of them on the spot so must have dismantled a certain dm3s. Maybe if you call them they can steer you in a way or another based on real practical experience. I confess that I have the opportunity to work on this exact model.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
HP touchsmart adding graphics card
I have a question.
I have HP touchsmart computer, model 520-1070 uk with integrated graphics HD 2000.
Can I add a better graphics card HD to the MXM format on my computer?
It is very important for me, please help!
Here are the specifications of your desktop HP TouchSmart 520-1070uk and its card mother IPISB-NK (LavacaSB). According to the specifications, it supports;
1 taken Mobile PCI Express Module (MXM)
MXM 3.0 version: Type has
<>In theory, this would indicate that you could install an appropriate type MXM card. In practice, this slot machine is designed for use in HP CTO models that come from the factory with the card already installed. Models with the card already installed have a completely different heatsink which hosts the MXM card. Your model has a heater which cannot recognize the cooling of a MXM card needs.
In addition, the cards must be from HP and are expensive. Also, you may be unable to correct the source radiator / fan assembly to use with the MXM card.
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
-
I have a HP Touchsmart tx2-1275dx that I bought at Best Buy and there is no technical support on the site of HP information. Is there an equivalent model whose support is? I need to know the configuration of the product and especially map mother, keyboard, monitor, and memory specifications.
Hi sazn,.
Here is the support page for this product:
http://h10025.www1.HP.com/ewfrf/wc/product?product=3979556&LC=en&DLC=en&cc=us&tool=&query=TX2-1275dx
Product specifications can be found here:
http://support.HP.com/us-en/document/c01761014
Is there something in particular you are looking for?
-
Drivers Windows 7 x 64 for the card mother Memphis-M
Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.
Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.
I need:
Simple communication controller PCI Chipset, USB 3.0.
Thank you and waiting for a response.
Hello:
You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.
DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES
Chip set:
Comms Simple PCI:
USB 3:
-
Replacement card mother Qosmio G10
After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:
1. second HARD drive internal no more seen.
2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
3. always on cooling fan.Upgrade the motherboard consisted of:
1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
2. loading the CD-ROM TCN0000006 official update tool.
3. no recovery BIOS or EC/KBC.Any idea?
I m wondering how you did update the information in the DMI?
As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
So maybe his bad card mother -
Satellite in a series - error: conflict of resources - PCI on the card mother BUS: 09
What started it stops early on with the error:
-Conflict PCI resources on the card mother BUS: 09, device: 01 function: 00
-Conflict PCI resources on the card mother BUS: 09, device: 01 function: 02
-Conflict PCI resources on the card mother BUS: 09, device: 01 function: 03I have the option to continue with F! that works.
I use Windows 8 at the moment, but it seems not so stable. Above mentioned mistakes occurred that after awhile, I upgraded to W8.Do I need a new motherboard, or y at - it another option. What does this error mean in normal words.
Hmm, it looks like a problem with the motherboard or part connected to the motherboard.
The error indicates this device 01 because of controller 09 conflict
Have you tested the RAM?Recommend doing this! You can use a tool like Memtest or similar.
Maybe it isn't that a Ram problem and new modules could solve your problem. -
H8-1223: card mother HP Angélique Label of ports and diagram
Put I upgraded my computer and I have a upgrade my card mother-M3970AM-Hp (Angelica2) in an Obsidain of Corsair 350 d case. The problem is the case connectors are labeled, but aren't the ports on the motherboard. I need to have the labels on the ports and connectors of my Board of Directors. The case conectors are: Power SW, Pwer Led - and Power Led + and SW Reset. I need information on the place where to connect or if these connectors at all. I'll try to send some photos if I can understand how this Bluetooth to my cell phone.
On the left is the cornerstone of HP mother. I wanted you to see the ports that are on the map. PSWD HP LPC. The line is the Corsair Obsidian Series 350 d connectors. How can I connect these? Or do I really need them?
-
HP P6 2120t: possible cards for the card mother Pegatron IPISB-CU on a computer of 2120t HP P6
So, I'm looking to upgrade my graphics recently. Over the months, I've been looking around and find out a lot about how work cards graphics, and I need to find one. However, what I don't know much about is the compatibility of graphics cards with card mother Pegatron IPISB-CU. I checked and I'm running on FRIEND 7.19 BIOS update 02/04/2012. It seems that I need to look for graphics cards that can work with "Legacy" BIOS. However, it's not not clear that even if I bought one it would work. I was hoping so to ask HP and the community if there was in fact a strong graphics card that would be 100% some works with my motherboard/BIOS card.
To archive the many discussions of forums, it seems the MSI 750ti ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814127783 & cm_re=msi_750-_-14-127-783-_-Product ) is my best bet because it is said to have a switch making it compatible Legacy Boot. However, read the description of the product, I have not found this mentioned in the features. What scares me.
If someone could shed some light on what I'm working with. I would be extremely grateful. I'm ready for the possibility that there is no viable option other than buying a new motherboard and the OS, but if I can get away with upgrading my current system I would be very grateful.
Thanks to all who take the time to read/answer
Drew
At the company MSI Web page in the master record for this MSI cardunfortunately didn't even State if power 6-pin PCIe connectors are needed. Also, it does not specify that there a dual BIOS or the old BIOS support. I wouldn't consider this one for your motherboard.
You may need to upgrade the PSU as your installed PSU doesn't have 6 - pin PCIe connectors with power cable to power the card video update.
EVGA and Gigabyte are also PCIe x 16 graphics cards with dual BIOS allowing a choice of inheritance or the EFI.
Cards with BIOS double EVGA
http://www.EVGA.com/articles/00767/
I'd take a peek at the r7 of Sapphire Radeon 260 and higher and r9 in the 300 series Radeon cards. In fact, they have a physical switch on the map.
Sapphire video card specifications
http://www.sapphiretech.com/catapage_pd.asp?cataid=271 & lang = eng
What is 100% certainty in the work with your motherboard, you upgrade a ready to use PC or a system as you put as well as components custom, studied and chosen by yourself.
I suggest you buy your video card with your credit card. If this does not work with your motherboard you can return. Which takes an element of risk fomr away the attempt.
-
Hi I have a Hp Touchsmart tx2-1025dx pc and he go and turn on the locking caps keeps blinking and the computer doesn't show anything on the screen, but all the lights are on and I hear the fan sometimes it works sometimes is not anyone can help with this
Hi Hernandezerick2 and welcome to the Forums of HP!
I understand that you have a problem getting your HP TouchSmart tx2-1025dx Notebook PC to turn on. I'll try my best to help you solve this problem.
Here is a document for computer does not start and the lights blink or the computer will beep with information about what mean lights and beeps and how to fix it.
I hope that this information help, please let me know how it goes.
Thank you and have a great day!
-
What card mother motherboard inside the Pavilion hpe h8xt with Ivy bridge
You want to buy, but can't find any information on what motherboard that uses. Would love to see a pattern!
@ Big_Dave
Here is the card I found for the card mother HP OEM Pegatron IPMMB - FM (Formosa). The specifications indicate the decision-making is an Intel LGA 1155 (Socket-H2) and processors supported are;
Intel Core i3-3xxxT (Ivy Bridge) Dual Core 256 Intel Core i3-3xxx (Ivy Bridge) Dual Core 456 Intel Core i5-3xxxT (Ivy Bridge) Dual Core 256 Intel Core i5-3xxxT (Ivy Bridge) Quad Core 152 Intel Core i5-3xxxS (Ivy Bridge) Quad Core 756 Intel Core i5-3xxx (Ivy Bridge) Quad Core 676 Intel Core i7-3xxx (Ivy Bridge) Quad Core 676 Intel Core i7-3xxxK (Ivy Bridge) Quad Core 676 Intel Core i3-2xxx (Sandy Bridge) Dual Core 756 Intel Core i3-2xxxT (Sandy Bridge) Dual Core 256 Intel Core i5-2xxx (Sandy Bridge) Quad Core 95W Intel Core i7-2xxx (Sandy Bridge) Quad Core 95W Dual-core Intel Pentium G6xx (Sandy Bridge) 756 Dual-core Intel Pentium G6xxT (Sandy Bridge) 256 Dual-core Intel Pentium G8xx (Sandy Bridge) 756 and supported memory;
Dual channel memory architecture
Four DIMM DDR3 240-pin connectorsSupports DIMM DDR3 modules
PC3-10600 (1333 MHz)
PC3-12800 (1600 MHz)
Memory non - ECC, unbuffered
Supports 1 GB, 2 GB and 4 GB DIMM
Supports up to 4 GB on 32-bit systems
Supports up to 16 GB on 64 - bit systems
Frank
-
card mother Memphis-b: b of memphis
I bought a new case for my computer, my computer has card mother mephis - b inside and I do not know what pins match the power switch, power led, ect there at - it a model that explains what the pins are what? Help, please.
Please try the stitching as shown in the graphic below;
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
Maybe you are looking for
-
I can no longer put a bookmark to a specified folder.
I can no longer put a bookmark to a specified folder that already exist. In the previous version when you click on the 'Star' or 'Bookmark this page' a pop-up windows offers the user an option of the location where to save the bookmark, since I updat
-
I use the helper downloader (ver. 2.2)When you save a video of WWII on my Windows 7 Desktop, during the period of the video, I get points at equal distance between the screen and flashing arrow as well. What is the problem with my download? k1cgi@AOL
-
??????
-
Satellite A660 - 11 M - USB devices not recognized
HelloI recently bought a new Satellite A660 - 11 M, and none of the USB ports seem to work. Ive tried plugging in all: 3 different mice, USB keys, ipod but nothing seems to register. It does not even say that the device does not work, when I plug it,
-
One of my friends bought an all in a desktop computer VAIO, a Sony.com VPCJ118FX/B, to be computer to be used in paris (France), so with a QWERTY keyboard.As she did not want to be disturbed, she bought in her country a Sony service center set of QWE