How can I fix a stack overflow?
I open a program on my computer (I have Vista 32-bit) and it does not open. A dialog box appears and indicates "stack overflow". I understand that there is a problem with the program code or the computer has too little memory. So how to fix it?
Hello
1. what application gives you the error message?
2. is the specific question to any application into one?
3. What is the full error message?
Stacks are reserved memory that programs use to treat the material events. A stack overflow occurs when there is not enough space in memory to run the hardware interrupt routines.
To optimize the performance of the Windows Vista-based computer, I suggest you refer to the following article:
Optimize Windows Vista for better performance
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
Also try to check your hard disk for errors by following the link below:
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
Perform a security analysis and check if there is no infection.
If no security software is installed, download and install Microsoft Security scan from the below mentioned link and scan the system:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
(Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.)
Hope the helps of information.
Tags: Windows
Similar Questions
-
How can I fix overflo stack to line 15
I have Windows XP Service Pack 3. How can I fix a stack of overflo on line 15 error? I don't know much about computers. I have a laptop.
"Stack overflow" is a sign of a badly written request. What do you do when this error?
-
How can I fix an error message indicating "on line 115 stack overflow?
How can I fix an error message indicating "online stack overflow: 115?" on XP. thX)
Honestly - you can get best results download and installation and then using Firefox for Facebook.
Also, make sure that you update your Flash Player and Shockwave Player.
-
HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)
Hello
Please do not type in capital letters because it's difficult to read and considered to be shouting.
---------------------------------------------------------------------------------------------------
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
The system has RAID? If so, it's also very suspicious.
This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.BCCode: 7F 0x0000007E which is also 0x1000007E
Cause
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
interpret, you must identify which exception has been generated.Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
the Microsoft Windows Driver Kit (WDK).Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the
- Reference of the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Make sure all new hardware that is installed is listed in the
- List of Microsoft Windows Marketplace tested products.
- Service driver or defective peripheral system. A service driver or defective peripheral system can be
- responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
- and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">-->
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-----------------------------------------------------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the.
http://www.NirSoft.NET/utils/blue_screen_view.html
death ' crashes and displays information about all accidents of a table.
FreeBlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How can I fix my microphone on my laptop so I can talk to people?
I have a HP pavilion Entertainment PC. I accidentally turned off the MIC somehow so my friends can not hear what is happening in my room as I speak, but they can still hear my music what im playing off of youtube and itunes. How can I fix my microphone so I can talk to friends?
Hello
How to activate Audio devices hidden in Vista and Windows 7
http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.htmlConnect one microphone, music player or other audio device to your computer (you want to be sure
the mic input is enabled)
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer-----------------------------------------------------------------------------------------------------------------
Pilots may also need to be updated:
Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
Audio (this is an example and you can have an other name/maker).Make sure you write down the description and model double click top - tab drivers - write version. Now
Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.If your driver shows 06 you have the default windows and part of the question.
Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
Put them - right click on Reboot - RUN AS ADMIN -.Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
and then install the latest version. Restart and check after each test, not
rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
installed shows upward on the tab of the driver.
Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html---------------------------------------------------------
After the updated driver.
Click with the right button on the speaker near clock - recorders - right click in the box - check see the
Disconnected devices and show disabled devices - check your micro - highlight
then on lower right properties. Make sure that the appropriate injector is selected and check
other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
is the RealTek Audio Manager, yours can be quite different name if you have one.How to activate Audio devices hidden in Vista
http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.htmlConnect one microphone, music player or other audio device to your computer
http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspxProblems with sound and audio or no sound - a Mr Fixit
http://support.Microsoft.com/GP/NO_SOUNDI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Windows Explorer crashes. How can I fix it?
Recently, whenever I boot my Win 7 Ultimate, after that my programs are loaded, Windows Explorer crashes. How can I fix it?
Hello
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
-
Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...
I don't know if this is the problem, but it is something that must be correct establish a secure connection:
Open Date and time preferences system, Date & time tab. Make sure that it is set to automatically set the time.
Alternatively, make sure that your date/time is correctly set to the second.
Another thing to try is to restart your modem and router.
-
After that I update to iOS 10.0.1, my apps started the update, but it brick and I can't stop the update, I can't use apps and I can't even delete apps. Please how can I fix it. It is so boring.
Thanks for help. Kevin
First (and easiest) is a reboot or a forced reboot:
Restart your iPhone, iPad or iPod touch - Apple Support
Next (and more radical) would be a restore from a backup, then restore it like new:
Restore your iPhone, iPad or iPod touch from a backup - Apple Support
Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
-
How can I fix black spots on the camera in 9.3.5 iOS?
How can I fix black spots on the camera in my iPhone 6 Plus? Please help me.
You see the same locations if you take a picture out in the open?
It's more like flares of the lens, because of the light coming from one side of the room and hit the lens at an angle. If so, it is an optical phenomenon and cannot be resolved.
-
How can I fix the old sick apple mouse from 6 months on wire scrolls alone now
How can I fix the Apple mouse sick, aged 6 months on a thread that has been scrolling OK but now scrolls just of internet pages to the top of the page using El Captain so far?
Probably need a clean place, tried.
-
How can I fix 6s iphone and ipad air when they do not recognize my printer air. After unplugging the printer for 30 seconds, they can connect to the printer
Hey robertafromnull,
Thank you for using communities Support from Apple. We can see from your post that you are having problems with printing of your devices on a printer of Air and that it would be happy to provide advice to solve this problem.
Let's start by going to the section called "If you can not print on your AirPrint printer" in this link here: Topic AirPrint. This should contribute to help you get started with you back to printing from your iPhone / iPad. Let us know if this can help, or if you encounter any problems.
Kind regards.
-
In Entourage, all the incoming mails are doubled. How can I fix this?
In Entourage, all the incoming mails are doubled. How can I fix this?
Entourage is not an Apple product and there are very few users Entourage here. I do part, but never encountered the problem you describe. You the best chance for a quick resolution is to post your question forums Office: Mac from Microsoft here:
Everyone he's a Mac user AND a user desktop, something you can't say about Apple forums. You will get the quickest help there and I think you'll find contributors more useful.
When you post here, do not forget to include your Office version and your version of Mac OS x.
-
I just ipad - first apple product. Put my name in wrong. How can I fix it?
I just ipad - first apple product. Put my name in wrong. How can I fix it?
"Put your name in the wrong" where?
You can enter the application settings-> general-> about-> name and change the name iPad here if that's what you mean.
-
I received a prompt on my Ipod touch 5th generation yesterday, that there is a new update of the Messenger application. So I tried to update, however, the app is now stuck on the phase "Waiting."... "and the logo has been disabled. I still get notifications of new messages from the app, but I can't open. I tried to remove and then reinstall the application but the application did not and the app store think that I always opened it. How can I fix this or return to the previous edition that worked?
Thank you in advance!
Hello cfossum,
Looks like you have problems with a third party on your iPod touch app, since the Messages belongs to iOS and you would receive separate not quickly update.
The resources below will provide some troubleshooting steps for the problem you are having with the Messenger application.
If an application you have installed unexpectedly closes, unresponsive, or does not open
Take care.
-
How can you fix an iPod that won't boot to the top or either load I went to a local store to see if it can charge, but it cannot and it is running ios 9.3.3 32 g
There are several ways to recharge your iPod.
Try here > If your iPhone, iPad or iPod touch won't charge - Apple Support
Maybe you are looking for
-
Hi, I'm new to this thing of Skype sorry if I fall on mute. I have an Irish account and want to buy a number so people can call me. I want to receive calls mainly from the United Kingdom. Skype support says I have to bur a number... Certainly, it wou
-
I can't remember my secret question to reset my password for the email address.
original title: Email Recovery Dear, I need to reset my password of my previous email address but I can't just access it not remember my secret question, is there a way I can send the issue of resetting to a secondary e-mail address. can someone send
-
Hello! I have Acer desktop Veriton M290 with a version of bios P01. B0L. I saw that there is a new version P02. A1l, but it is impossible for me to update the firmware of the bios. Could you please confirm that it is the good new version of bios for
-
Aspire S7 Touch Pad does not work (fn + T doesn't help)
The touchpad on my Aspire S7 does not work, and I tried without a doubt the fn + T and alt + fn T patches. The touchpad has been buggy before total failure. He would sometimes get stuck in the guts down, etc. Now, there is zero answer either.
-
Could not start the Windows Firewall service, missing dependency services
Hello Dustin,. I suggest the steps after booting in safe mode and make sure you copy the entire command from "Windows Registry Editor Version 5.00". Start your computer in safe mode http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#