How can I fix the "... / dev/vmnet0 is not running" _permanently_?

A ran merger with happiness for quite some time, all very good, no problem.  Upgraded to Mac Snow Leopard and now every time the computer is restarted merger cannot access the LAN bridge, which gives the message:

"The network on/dev/vmnet0 bridge device does not work".

I managed that mitigated thanks to the tried and true and often recommended:

sudo/Library/Application Support / VMWare Fusion / boot.sh - restart

command.  However, at the next restart I have to run this new.

So my question is this: How can I fix this problem so that this command should not be run on each reboot?  What makes break my update of Snow Leopard?

Thank you

J.

How can I fix this problem so that this command should not be run on each reboot?  What makes break my update of Snow Leopard?

The update probably got rid of the startup item that calls boot.sh. Relocation of Fusion (this will not affect your virtual machines) should fix things upward. In general I would say reinstallation Fusion on a major change of OS version, that I wouldn't count on any last thing being kept properly.

Tags: VMware

Similar Questions

  • How can I fix the libraries that are not connect?

    I have improved my CC ti plans to include stock BUT libraries that I create in Apps doesn't NOT appear in interface stock or visa versa which kind of denies one of the key features. Does anyone know how to fix this?

    Hi Lee,.

    First of all, make sure that you are connected with the same Adobe ID on CC apps and Web Adobe Stock site.

    In addition, make sure you have CC desktop application running which is responsible for the synchronization of libraries CC.

    Let me know how it goes.

    ~ David

  • How can I fix the old sick apple mouse from 6 months on wire scrolls alone now

    How can I fix the Apple mouse sick, aged 6 months on a thread that has been scrolling OK but now scrolls just of internet pages to the top of the page using El Captain so far?

    Probably need a clean place, tried.

  • How can I fix the icons who are unable to move the bar to the add-on?

    How can I fix the icons who are unable to move the bar to the add-on?

    It didn't help me, but it was a good try. I found an extension called U I 1.4.4 Fixer who did most of what I was looking for. Thanks for answering my question so quickly Cor - el.

  • My computer screen is in landscape position. How can I fix so that I do not read on the side?

    My computer screen is in landscape position. How can I fix so that I do not read on the side?

    Friday, October 19, 2012 13:12:42 + 0000, LisaCarey wrote:

    My computer screen is in landscape position. How can I fix so that I do not read on the side?

    The ability to rotate the screen image is a characteristic of your video
    card, to help work with instructors who turn to the portrait
    orientation. Almost certainly you accidentally pressed Ctrl-Alt, and
    an arrow key.

    Rotate using these keys.

    Ken Blake, Microsoft MVP

  • How can I fix the error 35603 Runtime

    How can I fix the error 35603 Runtime

    Hi walter101,

    ·         What version of the operating system is installed on the computer?

    ·         When exactly do you get this error message?

    ·         What is the full error message?

    ·         You did changes to the computer before the show?

    Answer with the information required to help more.

    You can also see the article:

    Suggestions for a question on the help forums

    http://support.Microsoft.com/kb/555375

    For reference:

    What is a runtime error?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-runtime-error

  • How can I fix the ati display driver

    How can I fix the display driver?

    Hello

    I thing the problem is related to Internet Explorer. Try to see (the Internet Explorer menu) if in the display menu, the Zoom is set to 100%, the text size is set to medium and style is set to the default style.

    What version of Internet Explorer you are using?

    Please post the results.

    Best regards

    Andrew

  • Access to a specific registry key (HKEY_USERS\S-1-5-18\software\Microsoft) causes a BSOD. How can I fix the key?

    Original title: access to a specific registry key generates BSOD. How can I fix the key?

    Scans the registry in XP causes a BSOD. The wrong key is HKEY_USERS\S-1-5-18\software\Microsoft. Access to manually also causes a BSOD so I can't delete or export it. I do not have a restore point from before the problem started. Other than the access to that key or run a search, XP works well.
    Is it possible to fix this?

    Not having no not this error in my notes (in other words, I've not seen at least 2 times), I Googled it and first fell on a MS KB article:

    http://support.Microsoft.com/kb/810558

    This article includes this statement:

    Contact Microsoft Technical Support to help heal the corruption in the registry.

    I think that is where you are right now, so let's see what is the response of the Microsoft Support Engineer, now that there is more information.  I always love to see what they have to offer first.

    Why and how did you change the system restore to create restore Points 3 a day for 30 days (FYI - that is not the same as a backup).

    If you were to solve some problem at the time, what was the question?

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    In the meantime, I would run a chkdsk /r on your volume XP since XP Recovery Console.

    If you are not sure of the SP2 CD you have is an XP bootable installation CD authentic and not some kind of restore CD for the Dell system to 100%, I would recommend this (that I've seen more than 2 times):

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • How can I fix the error on the email page. It doesn't let me open the e-mail.

    Error on the email page

    How can I fix the error on the email page. It doesn't let me open the e-mail. I can get there but nothing opehs I have windows xp... Please contact me at * address email is removed from the privacy * thanks for any help

    Are we to guess which email page you are talking about? Could this be one of them?

    View all Windows Live and Hotmail questions in the appropriate forum found here:
    http://windowslivehelp.com/

  • How can I fix the error "searchfilterhost.exe" which keeps closing down of my computer?

    How can I fix the error "searchfilterhost.exe" which keeps closing down of my computer?

    SearchFilterHost.exe is part of Windows Search. However, it is Malware which can pass searchfilterhost.exe.
    I would like to start by downloading the free version of this tool. First check the updates and then run a full scan.
     
     
     
  • How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences.

    How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences.   I have widows xp pro

    Hi Plumbbgp,

    1. what brand & model of the scanner?

    2. the scanner was working fine before?

    3. don't you make changes on your computer before this problem?

    Please provide us with more information about the issue so that we can provide you with the necessary assistance.

  • How can I fix the link between adobe and windows if I see .pdf not win32 application

    How can I fix the link between adobe and windows if I see .pdf not win32 application, without the disc?

    "Adobe" is the name of the company that provides a great many different applications.

    Adobe Reader is free and allows you to view pdf files.

    Adobe Acrobat is expensive and allows you to create, edit and view pdf files.

    Assuming that you are referring to the reader, uninstall all the versions of it using the control panel > add or remove programs.  Then either

    1. go to http://get.adobe.com/reader/?promoid=BUIGO and download the current version (remember to uncheck the box to install McAfee Security Scan Plus.

    or

    2. go to http://www.foxitsoftware.com/Secure_PDF_Reader/ and download Foxit Reader, a small pdf reader and many more.

    Then, install the reader that you have downloaded.

  • How can I fix the screen because everything is horizontal and not vertical poster?

    How can I fix the screen because everything is horizontal and not vertical poster?

    Hello

    Please tr

    1. Press and hold Ctrl + Al bot
    2. Press the enemy (left or right because I do not know what sense on your screen)

    Hope this helps

  • How can I fix the error 216 evrytime I open internet or my computer the error popup

    How can I fix the error 216 evrytime I open internet or my computer the error popup

    How can I fix the error 216 evrytime I open internet or my computer the error popup

    Try here

    http://support.Microsoft.com/kb/259279

  • I lost all the sound elements of the vista Media Center! How can I fix the problem?

    I have vista Home premium op sys and my media center windows lost audio output. Wheather read files from my hard drive or a DVD. mEDIA PLAYER has SOUND BUT NOT MEDIA CENTER. How can I fix the problem?

    Hello
    • What were the changes made before the problem occurred?
     
    You can check this link:

Maybe you are looking for