Workstation HP Z230 - update of the Bios does not, cannot restore bios

Similar Questions

• My update of the software does not work

  My update of the software does not work and I can't return to the main he keeps on telling me to restart the computer and then go through the software update settings, then it ends by does not and then it tells me to restart and restart and restart again and again

  What updates you trying to install?

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• BIOS update failed: the process does not have this system. The process of the utility is not complete.

  I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.

  Here is my BIOS information.

  "Manage 0 x 0031, DMI type 0, 24 bytes.
  BIOS information
  Seller: LENOVO
  Version: JBET54WW (1.19)
  Release date: 06/11/2015
  Address: 0xE0000

  Runtime size: 128 kB
  ROM size: 16384 KB
  Features:
  PCI is supported
  PNP is supported
  BIOS is extensible
  BIOS shadowing is allowed
  Boot from CD is supported
  Selectable boot is supported
  ACPI is supported
  Legacy USB is supported
  BIOS boot specification is supported
  Targeted content distribution is supported
  UEFI is supported
  BIOS version: 1.19
  Firmware revision: 1.2 "

  What could you suggest to get the update disc to recognize my system?

  I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.

  I hope this helps someone stuck in a similar situation.

• You tube asking for update of the browser does not?

  OK so today of nowhere tube you now says on my palm (your browser is no longer supported, please upgrade to Safari, opera, firefox or Google chrome) in another case, it said please update your Flashplayer... This is now going to be a problem, or is there a solution?... In addition to the use of the application because the application does not all videos or can't find it...

  @WillieR:

  I tried to reproduce, and I was able to use the YouTube Web site very much. It redirects to the mobile version, m.youtube.com, but this site loads very well and allows the same search as the site of office functions.

  I also never seen a video shows no upward in the search for the YouTube app could give you an example of a video that appears on the site but not in the application?

  TreoAide

• I get emails, but the date of update at the bottom does not change

  I get emails, but does not change the "updated"date at the bottom? Seems to be stuck on 04/03/16!

  I hope someone can help.

  Use the app selector - double click of the home button - and close the email app

  Force restart the iPad

  See if the problem resolves

  If this isn't the case-

  Remove e-mail account

  Yet once force restart the device

  Re add it in

  Restart your iPhone, iPad or iPod touch - Apple Support

• Windows Update page does not load, another updater with "update" in the url does not work, and the microsoft Download Center will not download. Help!

  Right. I read the other posts and do not know if it's the same or not, but...

  Update Windows page fails to load - no error message
  antivirus and another updater with update in the URL cannot purely and simply, or don't load - no error message
  any attempt to download anything from microsoft download site fails to load - no error message

  I got stardock, not my colors, uninstalled

  same result.

  any ideas?

  CLM-NSWG4,
  It seems to me that you can have to deal with a virus\malware infection.  You can watch these threads discuss virus problems and see if you are able to detect problems, that I suggest you use an online scanner (if you are able to) and scan your system.

  Windows Live OneCare Safety Scanner Windows 7\Vista

  Windows Live OneCare Safety Scanner Windows XP

  Get rid of malware

  Can I clean an already infected computer?

  If you need more help then read: what to post in the Windows Update forum
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista cannot be updated because the service does not work!

  Windows Vista will not update because it says that the service is not running.  He said I might have to restart the computer.

  I tried several reboots the computer.

  I tried to get into the services and manually stop and restart the service.  Nothing seems to work.

  I'm downloading the SP2 for Vista, let's see if that fixes the problem.

  Any help?

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• "Update of the server does not" when you try to update Acrobat 9 Pro

  I just installed Acrobat 9 Pro on my desktop and on my laptop. I was able to download and install the latest updates for the copy on my desktop computer (so that it is now version 9.3.0), use help > check updates.

  When I try the same command on my laptop, I get and error message "update server is unresponsive, which means that it may be offline at the moment, or the Internet settings or firlewall may be incorrect. Please try again later. "I tried several times yesterday and today with the same error. The message appears immediately; apparently not yet actually try to connect.

  I disabled my firewall and antivirus and always get the same result. I uninstalled then reinstalled Acrobat and still get the same result.

  I looked online on Adobe.com to see on the download and installation of updates manually, but it is difficult for me to say what updates, I need. Some are for other languages and some are 64-bit, but I have Windows 7 32 bit.

  A call to technical support was no help. The agent seemed to think because I installed the 9.0 version I needed only one English updated appearing on the page of download under 9.0, not updates later... And he said that Adobe recommends manually installation of updates of the site Adobe.com rather than use the control for the control of updates (?).

  In any case, anyone know what might cause this problem with the adobe update? Maybe I need to reinstall the update (where is it?).

  OR

  Can someone tell me who the updates listed on the page to dowload Acrobat should I install manually to bring my camera to date?

  [Running Windows 7 32-bit on both machines]

  Thank you.

  With all the respect that is due to the Bill, which is completely not the point of the question... you SHOULD be able to use the automatic update to easily update your Adobe products.  I have this talk frankly because I knew the incredible frustration of trying in vain to update my Adobe Creative Suite on my laptop.  I am assuming that you are trying to update Acrobat on a laptop and not on a desktop computer (not didn't have the same problems with my desktop PC).  The Merry is actually quite simple, just follow these steps:

  1. open the network and sharing Center
  2. click on change adapter settings
  3. right click on the map to Microsoft Virtual WiFi Miniport, and then click on disable.
  4. open Adobe Reader and help > check for updates

  And voila, updates to the Adobe Updater.  Enjoy!

• Dreamweaver 8.  Update of the model does not appear in other pages

  I created a template for my Web site. All pages in the Web site is used. Sometimes when I change the model and save, it queries on save the template and update the pages using the template. Sometimes he asks only to save the model. I just had to model and want the changes to be made in the related pages, but I can't ask him if I want to update the pages. What I am doing wrong? Also is there a way to force all pages that use a model to be rerfreshed from the model? (Changes in the model, I had attended a non editable section). Thank you

  That would certainly do. I would add that, as the means of 8? No - this is the case
  unlikely, I don't think I would! 8)

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "annpmul" wrote in message
  News:ea33q5$Go7$1@forums. Macromedia.com...
  > I found my problem. I was not using the correct model dwt file.

• last update of the firmware does not accept the px12-400

  the px12 throws an error when trying to install the latest firmware update and I can't understand why--or even the steps to understand.

  Hello skypuppy,

  Please try using another browser to apply the update.

  If this doesn't resolve the problem, try uninstalling SecureMind and re-download the firmware.

• Update causing the computer does not start...

  I downloaded the last windows update last night and now my computer will not boot even upward... to have to borrow another computer to try to find an answer!  I don't know even what updates have been downloaded, because I did it just before closing down.  I have Windows Vista 64-bit. What should I do?

  mizchevas01,
  As Paviro suggested, you should try to start in Safe Mode.  If you are able to do it then you can try a system restore to an earlier date updates.  So, I suggest that you install the updates one at a time (make a note of which one, you install every time) and see if the problem occurs again.  If you know one that has the problem and this will help solve the problem.
  You should also check that all your drivers are up-to-date.  You should go to the website of the hardware manufacturer to obtain the latest drivers. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Maintain the label does not / cannot download updates

  There are a few new downloads, as a 4.0 for Command Center I want except Dell repeat me my service tag is not valid? WOT? No matter if I type, leave the detection system to do the job, I'm also just a link through the AlienAutopsy program, this should not be a problem. Help?

  Looks like Dell ftp server is down for the moment. This is where the files are actually stored. Try again later.

  For all the files, try the http://ftp.dell.com (later)

• Error Windows update cannot currently check the updates because the service is not running, you must start the computer, windows update services does not

  Original title: Windows Update service is not running / working and is not listed in services.msc

  When I go to windows update a red shield with a white cross appears and when I click search for updates this message appears:

  "Windows update cannot currently check updates because the service does not work, you will need to start the computer"

  * Restared several times-nothing has changed

  Despite what other threads have advised to:

  I checked in the services and WINDOWS UPDATE, Background Intelligent Transfer Service or encryption services are not listed!

   

  * I have changed the settings to "Never search updates" and then back to "install updates automatically" - nothing has changed

  * I ran the Malicious Software Removal Tool http://www.microsoft.com/security/pc-security/malware-removal.aspx- we say that everything was ok, but I can't always verify updates

  * I ran the download to reset windows update components http://support.microsoft.com/kb/971058/en-us but still I can not check updates

  (Nothing is in the update history)

  Am really worried!

  Thank you!

  Hello

  
  Have you made changes on the computer before this problem?
  Method 1:
  You can try to start the fix - it and check. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
   
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

• Satellite R830-143 - update of the BIOS does not support this operating system

  Hello

  I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

  The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

  I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

  Does anyone know what is the problem?

  Thanks in advance for your help...

  Hello

  You have problems with the laptop?
  If not then why you want to do the BIOS? Just because the new BIOS is released?
  I would not change anything if my laptop is running correctly.

  However, the update of the BIOS requires the VAP (value added package).
  So remember that this PPV is installed correctly. If this isn't the case, so far.