Similar Questions

• How can I get the digital power meter?

  How can I get the digital power meter?

  I use a method similar to the example below to measure the market factor using the inputs of a multifunction data acquisition meter.  If the duty cycle is 0% or 100% for a given period, DAQ reading times out and returns an error.  In this case, I would get the digital state of the counter of entry so I can put as cycle to 0% or 100%.  I want to do it without knowing the digital port and line the entrance of counter... for example I would like to continue referencing DAQ/ctrX since I already have this information.

  The application uses an M series: PXI-6229 DAQ and LabVIEW 2011 to make a system customized for VeriStand.

  https://decibel.NI.com/content/docs/doc-12396

  For the moment I wired the block diagram to add a case structure to check the meter ID and string constants to set the identifier of digital input, as they share the physical connection.  As much as I can say that makes the specific code for the PXI-6229 (or any DAQ with only two counters that share connections with p2.1 and p) 1.4

  I have attached the VI sub.

  When the device is used with a different data acquisition, I can add the connection and/or separate control.  Looks like at least one will be necessary given that the meter can only detect the edges... I think it was the piece of information I needed.

  Thanks for your help!

• I have reinstalled 7home premium windows on my computer laptop samsung R540 laptop came preinstalled w/a webcam. How can I get the web cam work?

  I have reinstalled 7home premium windows on my computer laptop samsung R540 laptop came preinstalled w/a webcam. Once windows 7 has been installed, the web cam never came. I ran the update of windows the cam came, but only 2 of the 3 components have been installed. How can I get the web cam work?

  By visiting the support Samsung to get the drivers win7 and app photo, specific to your model.

  But assuming you used all the recovery of the samsung cd driver & the camera application should be installed in any recovery process.

  http://www.Samsung.com/us/support/owners/product/NP-R540-JA02US

  Do not use windows update for drivers, especially drivers for laptop

• How can I get Photoshop 11 (Camera Raw 7.4) to open and process the images of my Canon 70 d CR2?

  How can I get Photoshop 11 (Camera Raw 7.4) to open and process taken with my Canon EOS 70 d CR2 files? I downloaded camera Raw 9.2, but it doesn't connect.  The list compatible camera says that Canon EOS 70 d is compatible with CS2 files, but mine are CR2.  Any research I do just seems to run in circles.

  susank35683264 wrote:

  How can I get Photoshop 11 (Camera Raw 7.4) to open and process taken with my Canon EOS 70 d CR2 files? I downloaded camera Raw 9.2, but it doesn't connect.  The list compatible camera says that Canon EOS 70 d is compatible with CS2 files, but mine are CR2.  Any research I do just seems to run in circles.

  CR2 does not define a raw format, it is the family of Canon raw file. All Canon cameras has its own format.

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  Thus, PSE11 can not be updated to the required version of ACR, 8.2.

  Version 9.2 of ACR does not work with PSE11.

  If you don't upgrade to a recent version of PSE, your free option would be to download the program of DNGconverter, mentioned in the faq above.

  This independent software is capable of converting all of a folder from your CR2 files for raw format DNG PSE11 can read and modify.

• How can I get the latest camera raw to Lightroom 4.2?

  How can I get the latest camera raw to Lightroom 4.2?

  You just run the update. If there is a newer version, it will be installed. Except that 4.2 is the latest version out, 4.3 is currently at the final trial staged and can be downloaded from the Adobe Labs page.

  Mylenium

• I'm on the renewal of the car, and I am responsible.  I just need a receipt.  How can I get a digital receipt of my purchase?

  I have an automatic renewal on and me are charged. How can I get digital reception?

  Hi christians80977884,

  Please see to print an invoice or a receipt of payment. Creative cloud for information on the location/print an invoice of Adobe.

  Let us know if you have any additional questions.

  Best,
  Sara

• What is Visual Suite 8? It is essential, and, if not, how can I get rid of him? It generates dozens of error messages and crashes.

  I have Windows XP sp3 on a Dell Inspiron 6000. I'm regular crashes, and later Microsoft (up to 12 at a time) error report messages are all a repetition of the same thing: 'problem with Visual Suite 8 '.

  I don't know what Visual Suite 8, or what he does. It does not appear on the list of installed software.

  It is essential to the functioning of the laptop? If so, how can I re - install? If this is not the case, how can I get rid of him?

  Thanks for any help available.

  Hello Veritas,

  MS Visual Stuido is essentially a developers tool. Nothing, that you need unless you perform a codification. When/where are getting you an error message?

  Here's a quick link:

  http://en.Wikipedia.org/wiki/Microsoft_Visual_Studio

  hope this helps,

  Eddie

• How can I add a digital camera as a web cam

  I have a camera digital sony dsc - v1 and I would like to know if I could use it as a webcam? If possible how do I get there, I just bought the cam and it came with no instruction book. So I just a device with buttons, which as far as I know on this topic. so if someone could help me with explicit instructions please.

  I do not think that a digital camera will work as a webcam
  but the following links may be worth a visit:

  Sony DSC - V1 manual
  http://eSupport.Sony.com/us/Perl/model-documents.pl?MDL=DSCV1

  Sony DSC - V1 review
  http://www.steves-digicams.com/camera-reviews/Sony/DSC-v1/Sony-DSC-v1-review.html

• How can I get a digital WDT which includes all samples, not only that of the current stage of time...?

  See block labeled "digital data" in my attachment for reference. Currently, we can consider that the point of digital data for the current time step (it is removed before the following appears). However, I like it showed all the samples in the table as in the example that appears on this link under "digital waveform control":

  http://zone.NI.com/reference/en-XX/help/371361H-01/lvconcepts/fp_controls_indicators/

  Thanks a lot for your suggestions! I am new to Labview, so I appreciate your help.

  Hey westerman111,

  If you are looking to produce your display includes information of the previous steps of Solver solution, you'll need to buffer the previous data. How to implement this in a loop of Simulation of design by & control uses the Memory.vi under control design Simulation & > Simulation > utilities > Memory.vi. It will allow you to save previous information generated in the simulation for letter simulation environment.

  I've attached an example that should help you get started using the Memory.vi.

  I'd also sure that what you are trying to achieve is suitable for the control loop & Simulation. I know you said that you were new to LabVIEW, so I wanted to make sure that you went to sea in the right direction. Is there a particular reason, why you use the control loop & Loop Simulation instead of a standard time or a forum? The loop control design simulation & is unique in that it calculates the solution of a dynamic system to a no prescribed time and the ODE solver. It also provides tools to interact with the model you solve during execution. However, if you are looking for measurements (instead of the simulation of the dynamic model) and data acquisition I advise to use the standard features of LabVIEW.

  Here are a few useful references for the departure with the two LabVIEW Control Design and Simulation Module.

  Tutorial: Introduction to Simulation (Control Design and Simulation Module)

  http://zone.NI.com/reference/en-XX/help/371894G-01/lvsimhowto/sim_h_gs/

  Getting Started with LabVIEW

  http://digital.NI.com/manuals.nsf/WebSearch/ba2fb433a7940e7a862579d40070cc2c

• How can I get Adobe Digital Editions to work on my Macbook Pro?

  ADE worked well on my old Macbook to download books from Overdrive.  Bought nine Macbook Pro, ADE load down, and can not use it.  When it opened, you receive the following message:

  Error message: error getting license. License Server Communication problem.

  > Problem:

  > E_ACT_NOT_READY

  
  

  I tried the command + shift + D, and it does not have a window to remove so I can reauthorize.  What can I do else?

  Hi Annie,.

  I would recommend that you manually delete the activation file as it appears that ADE is stuck in a bad state. Please follow these instructions:

  1. In the Finder, locate the 'Go' option in the menu bar and click on "Go to folder" and type the following command in:
  2. ~/Library/application support/Adobe/Digital Editions.
  3. Delete the activation.dat file in the "Digital Editions" folder.
  4. ADE to restart and it should be disabled at this stage. You should be good to reconnect.

• How can I get my web cam to work in Acrobat Connect Pro?

  It is in fact the question of an end user that I'm unable to answer to...

  We use Adobe Connect for online language teaching, the end user is one of the students.

  I can't find the right answer of support to give him.

  Problem:

  My camera does not work when I connect to Adobe rooms but camera works very well with other software.

  Even if I knew that my old camera was working very well, yesterday I advanced and bought a new camera.

  I thought that maybe my software of the webcam may have had a problem, so I bought a unit of a different type with different software.

  Even after removing all the old software, same result:

  I assumed that the problem could be caused by my software firewall and security, so once I tried to change the permissions for Adobe and my Webcam, but that did not work.

  Once I restarted my computer just before the class, and then turned off my firewall completely, so there is no interference, but nothing helped. I'm totally stumped.

  Is there someone else has a similar problem?   Has anyone found a solution?

  I run Windows Vista with McAfee Internet Security Software.  I have always restart the computer prior to class and don't open any other program other than Google Chrome.

  I have now a new Microsoft LifeCam Cinema Camera with Webcam LifeCam 3.5 software.

  I test my camera before going online.  It still works fine.   Then I stopped the program of the camera and the connection class.

  When I "connect webcam' in the room, the light on my camera (which suggests that it is under tension), but only a black image is transmitted to the House.

  I suspect that the rate is higher than 20 and is probably 30 images. It is too high for the Flash to accept.  Most webcams at 15 as the standard stream. So, you will need to call technical support Microsoft for this camera see what are the specs and how to change it.

  I see on Amazon.com, it says this: "sensor capture 720 p video true HD quality up to 30 frames per second."

  So high default value is 30 that is why you found the black box... a high frame rate.

  You must go to settings or call Microsoft to learn how to change the fps to 15. You notice it says 'up to 30 frames per second", so that tells me there is a way to change this setting.

• Dell laptop. Web Cam does not work. Model Inspiron. How can I get the web cam works? Thanks in advance.

  I am running win7. Trying to get built in webcam to work. Help.

  Hello Jerry,.

  Go to Dell.com site, click technical support. It will then ask for your service tag. It's a sticker on the bottom of your laptop / inside the battery compartment. Enter it in the space provided and the site will return a list of drivers for your system.

  There is no charge for this. I have a Dell laptop and have been there several times for it free of charge. Otherwise, feel free to post your service tag and I can get the link of the place for you.

  Let me know if this helps you.

  Kind regards

  BearPup

• How can I get my Digital Editions ID reset?

  After a recent update app Overdrive, I had to reauthorize my Mini iPad and I got the error code 2004: too many authorized deviced to the ID. This, combined with 2 devices that were broken and cannot be unauthorized made me exceed my maximum 6 device. I wish that my ID Adobe reset so I can allow only devices that I use currently.

  Thank you

  Lori White please contact our support chat to request your activation of Digital Editions to be reset.  You can contact our support chat to http://adobe.ly/yxj0t6.

• Recently moved to Costa Rica: How can I get my computer to work in English only.

  Sometimes when I ask questions on line, I'll take whole pages in Spanish.  I would lilke my Windows XP to surf the web in English only.   What should I do?  Thanks for any help you can be.

  Hi Moonstorm,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description its sounds like you are trying to change the language settings for the web browser.

  If you are using Internet Explorer, version of Internet Explorer you are using?

  I suggest you to read the following steps if you are using Internet Explorer:

  a. open Internet Explorer.

  b. click on tools and select Internet Options.

  c. in the general tab, select the languages option.

  d. Select the language.

  Reference:

  Change your Internet Explorer language settings: http://windows.microsoft.com/en-IN/windows-vista/Change-your-Internet-Explorer-language-settings
  Note: There is place for Windows Internet Explorer 7 and Windows Internet Explorer 8.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• How can I get facebook to come. It displays only the topics and the information at the foot of page

  the rest of the page is empty

  Hello
   
  1. are you using Internet Explorer?
  2. the issue is not confined with facebook?
  3 dud you make changes to the computer before the show?
   
  If you use Internet Explorer, please follow the methods mentioned below.
  
  Method 1:
  
  Please follow the steps mentioned in the link below.
  
  http://support.Microsoft.com/kb/967897
   
   
  Method 2:
  
  Please follow the steps mentioned in the link below.
  
  Important: when you reset Internet Explorer 8 settings, all modules and customizations are removed, and basically, you start with a new version of Internet Explorer. It does not delete your Favorites, feed and Web slices.
  
  http://support.Microsoft.com/kb/923737
   
   
   
  If you still having problems with facebook, I suggest you to contact facebook.
  
  http://www.Facebook.com/help/