How can I get a non-Microsoft mouse to work on my Windows 7 laptop
I have just switched to a new laptop with Windows 7 and I can not change the allocation of mouse buttons. I'm a lefty and I need to move my mouse buttons.
In help, asked me to come to microsoft to download a software, but it does not say that and I can't find it on the site.
This is ridiculous, that Microsoft now restricts the functionality of mouse package.
That looks like the Microsoft Intellipoint software is installed.
Can you check "Uninstall a program" and see if there is an entry for "Microsoft Intellipoint"?
If so, you can uninstall "Microsoft Intellipoint"?
Tags: Windows
Similar Questions
-
How can I get Tun Miniport, Microsoft card to work properly.
There is an exclamation on it in Device Manager, but windows declare that it does not work correctly
I'm on hp Pavilion dv6000
Hello
· You are able to go online?
· You receive all code or an error message when you try to connect to the Internet?
Method 1:
I suggest you to reset the TCP/IP stack and check if it helps solve the issue.
To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
http://support.Microsoft.com/kb/299357
Method 2: Turn off IPv6
Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
NOTE:
You should do this for each network connection.
Method 3: Disable the DHCP Broadcast Flag
Follow the link below to disable the DHCP broadcast flag
http://support.Microsoft.com/default.aspx/KB/928233
Important:
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756
How to back up and restore the registry in Windows
You can also try the following items on the advice on common network problems.
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx
http://windowshelp.Microsoft.com/Windows/en-us/help/fc58605e-A2be-470C-95b3-6808a76347991033.mspx
Hope the information will help. Please go back and let us know.
-
How can I get my combat microsoft game simulator 2 to flight load in full screen
original title: Flight Simulator
How can I get my combat microsoft game simulator 2 to flight load in full screen? He did so automatically for 5 years but now does not work. right click on icon drop-down ox b has size options, but doesn't let me change the size.Just to let you know, it seems that the forum you posted this (the answers from Microsoft Site Feedback Forum) is not the most relevant to post to. I would recommend this announcement on the forum of Windows (like about Windows: Gaming).
I would recomment http://www.flightsimulationforums.com/index1.htm
-
How can I get rid of Microsoft Photo Editor 3.01?
How can I get rid of Microsoft Photo Editor 3.01 from my computer? I use windows Vista. I can't find the program in my Add/Remove Programs list. could someone please help. Thank you
How can I get rid of Microsoft Photo Editor 3.01 from my computer? I use windows Vista. I can't find the program in my Add/Remove Programs list. could someone please help. Thank you
===================================
The copy of MS Photo Editor 3.1 I have on my systemshould not be installed/uninstalled.When you run the .exe (microphotoed.exe) files areunzipped in a folder of your choice and the programruns from there.To get rid of it... just delete the files/folders.
There are 14 files in all:
microphotoed.exe (this is the file to download)
CHALKCHA. DLL
EMBOSS. DLL
GRAPHICP. DLL
NOTEPAPE. DLL
PHOTOED. CNT
PHOTOED. EXE (this is the executable file)
photoed. GID
PHOTOED. HLP
PHOTOED. GIS
STAINEDG. DLL
STAMP. DLL
TEXTURIZ. DLL
WATERCOL. DLLJohn Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
How can I get audio on my computer to work again
How can I get audio on my computer to work again?
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help
Remove the driver current completely and install the latest driver available. For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here
-
Moose title: How can I get the age of Mythology to work on windows vista
every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer
Hi rew55545,
(1) is this problem limited only to the age of Mythology disc?
(2) what version of the game you are trying to install?
Method 1: Run the fixit available in the link below and check if that makes a difference
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2: run the fixit available in the link below to resolve any problems with DVD player.Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
I tried to delete some unused programs of my had drive and cleared PC wlidcl.dll How can I get this program for the PC works as before? The PC works now as slow as a snail climbs. What do you suggest me? Thank you
Norman.--
E-mail address is removed from the privacy *.
original title: wlidcl.dll
Hello
I suggest to follow the steps below and check if the problem persists:
Not one:
Uninstall Windows Live essentials followed the procedure described in the link:
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Step b:
Download and install Windows Live essential from the link:
-
How can I get my external cd drive to work on my hp ultrabook
How can I get my external cd drive to work on my hp ultrabook
Hello:
In addition to the above, you will need to also go into the BIOS and turn on legacy Mode in order to boot from another device, but the hard drive with Windows 8.
You may also need to disable secure both boot.
-
How can I get my xbox 360 controller to work with my computer?... I can't even recognize the hardware? Im running Vista 64 bit on a quad core rig any help would be appreciated... Thank you
Hello Ghostdogaln.
How do hang you the controller? You must either use a * wired * controller, or use a wireless controller with receiver game Xbox 360 for Windows.
If you use a wireless with a Play and Charge kit controller, it will not work as long as the USB cord only actually plug into the battery for the controller itself. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)
-
How can I get my msn mail account to work on my nook Tablet?
How can I get my msn mail account to work on my nook Tablet?
Hello
I suggest you according to the question in this forum and check if that helps:
http://windowslivehelp.com/forums.aspx?ProductID=15
It will be useful.
-
have hp2009m comp with windows vista, how can I get my xbox wireless remote to work on it?
Hi Alex,
You can view the following items and see if it helps.
How to connect a wireless Xbox 360 controller or headset to your computer
Demonstration: Creating an Xbox 360 in an Extender for Windows Media Center unit
You can also get in touch with technical support Xbox for the same thing.
Hope this information is useful.
-
How can I get my HP PSC1510xi printer to connect to my Windows 7 computer? It will not be printed.
As far as I know, the series HP PSC1510 connect only via USB.
What happens when you connect the printer to your computer?
You have installed the software from the CD that came with the printer?
Are all the lights on the printer lit or flashing? Please describe.
You can print a test page by following the instructions on one of the following videos?
-
How can I get the type of coverage to work
type of coverage
How can I get the type of coverage to work
Hi Ted,
Once you take the type of coverage, it's ready to go!
You are in a place to type in information?
Once it is aligned, it works like a regular keyboard.
B Eddie
-
How can I get the adobe Creative Cloud ENT 1.0 for Windows 10 Installer?
How can I get the adobe Creative Cloud ENT 1.0 for Windows 10 installation program?, is - if compatible win 10 Pro?
I don't understand if you're talking about the creative cloud Packer, which is used to create deployment packages or the creative Cloud Desktop Application that is used to install and update applications on office services and access.
Creating cloud packer is available from the deployment Enterprise Dashboard, site Licensing tab or the creative teams of cloud portal.
The creative Cloud Desktop Application can be downloaded to desktop applications Adobe Creative Cloud | Adobe Creative Cloud
Both are compatible with Windows 10.
-
(1) how to undo what I have done to my tools? All I get is hand shoiwing when I click on a tool and tool wil does not. (2) how can I get my CC installed in my dektop in addition to my laptop?
Click window > workspace and restore of your workspace.
to install the application of office cc, https://creative.adobe.com/products/creative-cloud
Maybe you are looking for
-
Hello! I recently got a laptop and I can't connect to my laptop wwhen network frist launches the application finds net work >but then the now net go strives to find. This is due to?1 / wifi is on. 2 / all of the settings are correct as a tell? can so
-
How to find the size of the list box
Hello I have a list with 4itmes in that box. I want the list box size, just to busy data in the listbox. Is it possible that we can find the size of the list box? Help, please.
-
Windows Update Notification received yesterday. Tried to install KB953297 (MS .NET Framework 1.1 Service Pack 1 update for XP. My OS is XP and the error will be reported as 0 x 663. I tried to finish this update several times with the same result.
-
NSX on several areas of network in a vSphere Cluster
HelloI'm a noob in NSX. I read articles regarding the application of the NSX. but this is what keeps me thinking, how would implement NSX on an environment with a multiple secure area in a single cluster, as I used to do using vDS?say, I have a 32 cl
-
An installer is available for Photoshop cs5? (NOT the extended version)
I have Adobe contact via chat, but they couldn't help me.I'm looking for Photoshop cs5, NOT the version of cs5.1 Extended Setup.Can someone help me?