Can not connect via WiFi

Similar Questions

• I can´t connect via WIFI.

  I can´t connect via WIFI. My equipment is a Realtek RTL8191SE WLAN 802.11n, is recognized by the computer as work, and the version of the driver is the last update, I found on the web (version 2015.1.427.2010, dated 2010.04.27. What should I do?

  Hi Jeremiah c,.

  ·         What happens when trying to connect via wifi?

  ·         You receive an error message/code?

  ·         Have you made changes on the computer before this problem?

  ·         What version of the operating system is installed on the computer?

  Follow these methods.

  Method 1: Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:  Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 3: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4: Follow the steps in the articles provided.

  In the Windows wireless network connection problems

  Wireless network card: frequently asked questions

  Also update the latest drivers for the network card.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Reference: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows?T1=tab04

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

• EAS does not connect via wifi company post - 1.3.5

  This seems to be a somewhat different issue of EE that some know, so it was recommended that I start a new thread. My question: I can access is no longer to EAS via the wifi of my company. It worked before 1.3.5. If I turn the wifi off, I can then connect EE without problem. I get no error when connected via wifi, rather e-mail and calendar just don't update.

  It turns out that our firewall is configured to disallow connections since our internal wireless to internal resources through external access (that is, accessible through the Internet). This explains why it is not working currently - other devices exhibit the same behavior, including iPhones and laptops.

  The question then becomes: why it worked before? I can check before 1.3.5 I can be connected via wifi to my company and still connect to the Regional service. So the previous version tried to connect via wifi, then when he could not, did he switch to EVDO to connect?

  If this is the case, then it is a very nice feature and it would be great if it was turned off. If it is not the case, then I have no idea why it worked prior to 1.3.5.

• Printer will not connect via WIFI

  I'm continually offered an update for my CANON MG3250 printer, I've now had 8 in the past two months, and all were successful. Now my printer doesn't work! that is, it does not connect via WIFI, but will work on cable? All ideas/solutions please.

  Hello Nigel,

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your time.

  I suggest you to refer to this article and check.
  Reference:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Please keep us updated.

  Thank you

• New Mac Pro does not connect via WiFi to my ATT router.

  I have a brand new Mac Pro garbage but I'm unable to get it to connect to my ATT wireless router. My phone, the laptop and the TV do it but not my main computer. Oddly enough, I AM able to connect via WiFi for the Mac Pro to my laptop. Any suggestions?

  Please post your question in the Mac Pro support forum... Mac Pro

  If you have a question about one of the Apple routers... the AirPort Express, AirPort Extreme or Time Capsule airport... the products pictured below that we support in this forum... we can probably help you.

  

• OfficeJet 7410 does not connect via WiFi and will not scan

  I don't know if this post is in the right place, but here goes:

  I have a 7410 OfficeJet that was connected to my home network so that I could print/scanning wireless to it from any computer in the House.  It worked well for a while.  I am running Windows XP SP 3.

  We lost power for a few days during the hurricane (Fortunately it was our one central issue), and when the power was restored the 7410 wouldn't connect to the wireless network (we have FiOS).  I checked the unit identifies the correct system ID (and I entered the WEP key), but when I try to install from the desktop computer, it can not find the 7410 (laptop computer also was not able to find the 7410).  The only way I could get the desktop to detect the 7410 is to connect it to the router with an ethernet cable (it does not work with the laptop).  I also can't connect to the wireless printer if I put the IP address in my browser (I'm able to do when it's connected via ethernet).  Not sure if it is a firewall issue.

  When the 7410 is connected to the router with the ethernet cable, I could print to it without any problems.  However, I can't scan from it.  When I try to scan, I get the error message "when trying to scan, could not find the required user interface file (Please reinstall scanning software).  I uninstalled and reinstalled the HP software, but I still get this message.  I also followed the instructions here: http://support.hp.com/us-en/document/c00516936 but that has not solved the problem.

  This morning, I uninstalled the printer with the hope that, put it back in place could solve the problem of scanning, but now the computer is not able to find the printer, even if it is connected by ethernet.

  I hope I gave enough information.  Ideas/comments/suggestions would be appreciated.

  I think I see what's happening. You just need to reestablish the connection to the printer wireless. The document below should help you with that. Once you have done so, the software shouldn't have a problem connecting to the wireless printer.

  Installation of the software of the printer on a wireless network or network (Ethernet) cable

• DeskJet Ink Advantage 4645: Printer not connected via WiFi

  Hello

  I just finished setting up a new printer 4645 and it seems to work OK, but it fails to connect to my WiFi router. As a first step, it shows a list of networks, I would choose my SSID and asked a password. After typing the password for WiFi it is impossible to connect. I tried several times without success. MAC filtering is disabled. Later I turned on the printer power off and ack and retried the process again, but now, it would be not to display a list of networks and do not identify my network when I manually typed its SSID. Your help will be appreciated.

  Well, everything seems OK now. I had to uninstall the drivers and reinstall them again everywhere. Hope that no more problems.

• I can not connect via Adobe Acrobat Reader DC. Error: A network error has occurred trying to connect.

  We have recently sign up for Adobe Acrobat DC plan. We can sign without problems via Safari Web browser. When we open a PDF using Acrobat Reader DC and click the sign-in link, it freezes the reader and displays an error: A network error occurred trying to connect.

  We try to modify the PDF. We need to use Acrobat Pro to be able to edit the PDF file? We run MAC OSX 10.10.3. I thought that maybe it was blocked and turned off the firewall, but it gets the same error. I checked the version of Acrobat Reader and it is running 2015.010.20056. Don't know what else to try.

  Hi robertm7044538,

  Yes, you must install Acrobat Pro application to edit PDF files. Reader is a different application and you cannot edit PDF files in that.

  You can install Acroabt from here: Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  However as it freezes while opening the PDF file, please see this KB for help doc: https://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html

  Let us know if you need additional assistance.

  Kind regards

  Meenakshi

• Equium L40 - unable to connect via wifi or cable plugged ubs

  Hello

  I have an Equium L40. I can not connect via wifi or cable plugged ubs.
  It is a "Internet Explorer has stopped working. a problem caused the blocking of the program works correctly.

  He said in am connected to my hub and have a signal strong.

  Can you help me

  Thank you

  Steve

  Hello Steve

  Have you tried using another browser?
  Using Skype or some other messenger? None of them can connect properly?

  I put t know what is the real problem. Work not Internet Explore or WLAN connection in general?

• R7000: UPNP Renderer not visible when connected via WiFi

  Hi all

  I use the R7000 as a router and I have the problem that my UPNP renderer (Denon DNP-F109) is not visible if connected via WiFi (via Ethernet, everything works very well).

  Can someone give me a clue what to do here?

  I went on DHCP and UPNP in the configuration. All UPNP (Server/converter/controller) devices are in the same 192.168. * network.

  Thank you very much

  Stefan

  Hello Stefan,

  Please perform a reset of the device and check again if still the same problem.

• My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  Not knowing what the 'followed the steps posted' have been

  The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

  The iOS device sees the network?

  Error messages?

  Other devices connect now?

  The iOS device has connected before?

  Try the following to rule out a software problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Power off, then back on your router

  . - Reset network settings: settings > general > reset > reset network settings

  - iOS: troubleshooting connections and Wi - Fi networks

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  - iOS: recommended for WiFi routers and access points

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work

  I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work. I put it in a subfolder under photos. The box is there on this subfolder. (My older guns would use) But this scanner and the 7120 times insist on ignoring my selection and use of the pictures folder. (when I save, they won't have a record dated in photos, but I would rather not clutter it.)

  Nobody likes Macs.

  When you open the settings of the utility Scan IJ, there are 3 tabs at the top. The first tab is settings when the analysis is started from the computer, the second tab is for setting when the analysis is started from the control panel. Make sure that you change the destination folder to 'Save to PC (self)' on the second tab!

• I have a question, I'm trying to connect my phone via bluetooth with my laptop, but I can not connect, I can not find my phone bluetooth device is a photon with sprint 4g

  I have a question, I'm trying to connect my phone via bluetooth with my laptop, but I can not connect, I can not find my phone bluetooth device is a photon 4g with sprint, if anyone can help me I appreciate it.

  Check with the manufacturer of your celllphone or Sprint to make sure your phone has this feature, and if so, what is needed to get there.  It should be in the documentation for the phone manufacturer or Sprint web site.

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• forget password and I can not connect wifi to reset the password

  Hello

  I forgot my password after changing to connect to my computer and I can't connected to wifi to reset the password

  I need to lose my everything on my Imac with nothing

  What should I do?

  An apple article is here: change or reset the password of a user account from OS X - Apple support