How can I get my computer fresh again?

Similar Questions

• I only have my original home edition of windows XP SP1 update of CD.__I had a virus and had to reformat my hard drive. I don't have a boot disk. How can I get my computer working again?

  It installed fine but it does not acknowledge all of my material, i.e. monitor, modem... the monitor works but some weird setting. Is there a solution or a download that I can burn it to a cd to allow my computer to run properly again?

  You need to install the drivers from the manufacturer of your PC, if a brand of large surface or a laptop, if not by the creators of individual materials, for example, your motherboard / graphics if its own card, etc.

• I had a virus on my computer acer laptop and thought restoring factory setings it would solve the problem. It wiped everything, including my computer windows. How can I get my computer running again and what I look at?

  the screen that appears whenever I start my computer says "windows boot manager, windows did not start." a recent hardware or software change might be the cause.

  fie: \windows\system32\winload.exe

  status: 0xc000000e

  Info: the selected entry could not be loaded because the application is missing or damaged.

  A factory restore should you restore your computer to its state when you bought it. If the factory restore did not work, you have to be a problem with the hardware or the original image. Do factory restore using the recovery disks, not the recovery image on the hard drive. Alternatively, you can contact Acer technical support about the error since it is their original which has been restored. MS - MVP - Elephant Boy computers - don't panic!

• I have a hp laptop and the original key of windows behind the laptop which is glued is half damaged then, how can we get that original key again?

  I have a hp laptop and the original key of windows behind the laptop which is glued is half damaged then, how can we get that original key again?

  Hi yayatisharma,

  Product key Finder programs are USELESS for Vista computers preinstalled, as they find the product key of plant manufacturers, which is used for installations of mutiple during Assembly of the computer.

  This key will not help you reinstall Vista!

  If you communicate with HP they will post you Recovery DVD for a low price to reinstall Vista and they do NOT require a product key

  Or ask the use of the recovery Partition, which must be copied to the hard drive HP

• "A plugin is required to view this content", how can I get my computer to do this?

  I am trying to open a video file for my online class. When I click on the file, a gray box appears and reads "a plugin is required to view this content. How can I get my computer to open the video. I have a MAC and zero knows how to solve problems in this regard.

  You have Flash and QuickTime. You may need to install Flip4Mac if need to other media to be played.

  • https://support.Mozilla.org/KB/play-Windows-Media-files-in-Firefox
  • Flip4Mac: http://dynamic.telestream.net/downloads/download-flip4macwmv.htm

• How can I get my volume works again, ive lost somehow

  How can I get my volume works again, ive lost somehow

  How can I get my volume works again, ive lost somehow

  ====================================================
  The following links may be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (Win XP / Vista / 7)

  (307918) how to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918/en-GB

• How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed?

  Original title: I need a market to resolve the problem remove the instrument.

  How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.

  I can't know what "all patches" you've tried, but:

  Make sure that the system restore does not monitor the external drive.  SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max.  Make a right click my computer and select properties then the System Restore tab to configure SR.

  Make sure that the Indexing Service is turned off (at least for the external drive).  To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp.  For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc

  There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
  http://safelyremove.com/index.html  Among other features:

  The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.

• How can I get my computer Vista program to say "you have a message?

  How can I get my computer vista email to say "you have a message?

  Its depends on your email program. If you are using software such as Microsoft Office Outlook e-mail, then when you have received a new email it will notify you.

  For webamil, you could connect to your email address, and then drag the window and PIN to the taskbar to alert you to new e-mail.

• How can I get my computer to automatically connect to the internet whenever I turn it on?

  Connect computer to internet automatically switch on

  How can I get my computer to automatically connect to the internet? Currently, I have to press Fn F1 to activate the WLAN - not something huge, but a tad boring. Another computer on the same network will connect automatically in setting in motion.

  It is a 'feature' of the particular computer you are using. Take a look at the manual; It may be a setting in the BIOS to turn on the wireless on startup.

• How can I get my computer to listen to music from my phone via bluetooth

  How can I get my computer to listen to music from my phone via bluetooth

  Hello

  I suggest you to follow the steps from the links and check out.

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Set up a Bluetooth compatible device and try to play music and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

• How can I get my computer to use my second drive?

  I went to my computer and saw that I have 2 hard drives, each written that they have about 70 GB. Is this really true I have 140 GB in total? If so, how can I get my computer to use my other drive. I'm sorry if I wrote it in the wrong section.

  Hello Mathieu,

  Yes, there is a way, but there are "attacking" the drive so that the computer knows where it is. Who also encourages you to understand how you want to use the drive. Most people put their operating system and programs on a disk, the disk 'C' (C:\BootDrive would be an example) and to put their data on a second disk, the disk "D" files (D:\DataDrive would be an example).

  Once you've got it organized on paper (or in your head), to be labelled and / or format the drive. You can use the mechanism in the post following blue microwave, or you can use the freeware Aomei Partition Assistant application, which will be the ID and label and / or format your drive, according to what is needed. Download the app here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (only use the Direct download link).

  Once installed, you select the drive in question and select Properties, which will tell you the status of your order and options to your need to work with her. For example, if its not allocated, you will need to return it, format it and assign a drive letter. Or he may have already assigned a drive letter and just need to be formatted to be used. Or it may be already in. The program will tell you what you have and what you need to do as your next step.

  Let me know what instructions to proceed to the next step.

  Kind regards

  BearPup

• I have 8 GB of RAM, but computer shows only 2 GB as usable. How can I get the computer to see the other 6 GB?

  Installed 8gbs of windows 7 on a dell xps700, usable 2gbs RAM. How can I get the computer to see the other 6gbts.

  Original title: usable ram

  More than 2 GB says:
  http://support.Dell.com/support/eDOCS/systems/XPS700/en/SM_en/specs.htm#wp1057323

• I had to reinstall my old copy of CS2 after reinstallinng Windows 7. Now it won't let me activate the product, because the activation server is unavailable. How can I get the program running again?

  I had to reinstall my old copy of CS2 after reinstallinng Windows 7. Now it won't let me activate the product, because the activation server is unavailable. How can I get the program running again?

  See the link below:

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  You need to download CS 2 installation link above and make sure you use the serial number mentioned on the Web site only.

• How can I get my computer to open Adobe Reader Standard?

  How can I get my computer to open Adobe Reader Standard?

  You can't have two of those installed. You must remove one of them and the one who is left to repair.

• How can I get my computer out of safe mode

  my computer went fail mode without fail for some reason, how can I get normal again.

  [Transferred from Internet Explorer]

  Try restarting your PC and if he went in mode safe once again, then start the search for MSCONFIG and in the start menu uncheck safe startup.