How can I get my computer to recognize me as the administrater

Similar Questions

• How can I get my computer to automatically connect to the internet whenever I turn it on?

  Connect computer to internet automatically switch on

  How can I get my computer to automatically connect to the internet? Currently, I have to press Fn F1 to activate the WLAN - not something huge, but a tad boring. Another computer on the same network will connect automatically in setting in motion.

  It is a 'feature' of the particular computer you are using. Take a look at the manual; It may be a setting in the BIOS to turn on the wireless on startup.

• How can I get my computer to recognize this boot disk?

  Hello

  I followed the instructions on how to create an installer for OS X El Capitan bootable. I've set up on a USB key.

  But how do I get my computer to recognize it as a bootable disk? If I go into system under the startup disk Preferences, it is not there. If I restart the machine by pressing the Option key, it does not an option to boot from the USB key.

  What should I do to get my machine to recognize it as a bootable disk?

  The reason why I'm trying to do this is so I can disassemble the hard drive and run the disc utilities. Is there an easier way to do it?

  Thank you

  Bruce Fairbanks

  Well, you can always use the recovery mode: starting with the down command + R right after the chime. Hold down the keys until you see a progress bar. Take some time to connect to the Apple servers. When you see a utility window, choose disk utility to check your drive.

  What is the problem with your hard drive?

  With regard to your USB key: what instructions did you use? You formatait the thing first of all it is bootable? I him did not because I prefer the bootable clones, so I can't be specific help with this.

• How can I get my computer to recognize my new camera?

  I just bought a new elph of Canon 100 - I loaded the software but my computer does not recognize the camera being hooked up to it - know not why this is happening - in the past I have installed other cameras without this problem - I used the disk to download the software and it says succesful - but when I open the program, he said won't connect - check the conection to camera

  Wednesday, May 30, 2012 20:24:24 + 0000, R.C. 8901 wrote:

  I just bought a new elph of Canon 100 - I loaded the software but my computer does not recognize the camera being hooked up to it - know not why this is happening - in the past I have installed other cameras without this problem - I used the disk to download the software and it says succesful - but when I open the program, he said won't connect - check the conection to camera

  You have installed the correct driver for your camera and your version
  Windows?

  And by the way, you need to connect your camera directly. Buy a
  card reader for the type of flash card your camera uses (they are very
  inexpensive), put the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is easier and does not use
  the camera battery. I have both these card readers - one I keep on
  my desk, close my desktop computer and another that I keep in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• How can I get my computer to play movies on the tv w / vga cord?

  How do I fix my pc to play movies w vga cord?

  Perhaps the following links will propose a few ideas:

  How to connect my computer to a TV
  http://hookpctotv.com/

  How to connect your PC to your TV
  http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set

  PC to TV cables and adapters
  http://www.SVIDEO.com/PC2TV.html

• "A plugin is required to view this content", how can I get my computer to do this?

  I am trying to open a video file for my online class. When I click on the file, a gray box appears and reads "a plugin is required to view this content. How can I get my computer to open the video. I have a MAC and zero knows how to solve problems in this regard.

  You have Flash and QuickTime. You may need to install Flip4Mac if need to other media to be played.

  • https://support.Mozilla.org/KB/play-Windows-Media-files-in-Firefox
  • Flip4Mac: http://dynamic.telestream.net/downloads/download-flip4macwmv.htm

• How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed?

  Original title: I need a market to resolve the problem remove the instrument.

  How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.

  I can't know what "all patches" you've tried, but:

  Make sure that the system restore does not monitor the external drive.  SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max.  Make a right click my computer and select properties then the System Restore tab to configure SR.

  Make sure that the Indexing Service is turned off (at least for the external drive).  To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp.  For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc

  There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
  http://safelyremove.com/index.html  Among other features:

  The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.

• How can I get windows xp to recognize a new disk of 1 TB sata hard?

  How can I get windows xp to recognize a new disk of 1 TB sata hard?

  Hello NavarroIT,

  In addition to the previous comments, I have link for HD is not recognized.  It is an external drive.  However, without knowing the manufacturer of your hard drive, you will need to check on this end.  You may need to format the disk first.  I hope this helps.

  Microsoft Answers: External hard drive

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/external-hard-drive-is-not-recognized-in-my/8464edf9-d8b4-4afb-bd91-13d639c23c9c

• How can I get my computer Vista program to say "you have a message?

  How can I get my computer vista email to say "you have a message?

  Its depends on your email program. If you are using software such as Microsoft Office Outlook e-mail, then when you have received a new email it will notify you.

  For webamil, you could connect to your email address, and then drag the window and PIN to the taskbar to alert you to new e-mail.

• How can I get my computer to listen to music from my phone via bluetooth

  How can I get my computer to listen to music from my phone via bluetooth

  Hello

  I suggest you to follow the steps from the links and check out.

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Set up a Bluetooth compatible device and try to play music and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

• Have recently updated mobile wifi, how can I get my printer to recognize my new wifi?

  Have recently updated mobile wifi, how can I get my printer to recognize my new wifi

  Original title: mobile WiFi

  You must be a little specific (brand, model, W7 version etc.) to get a helpful response, I think. Then someone with a similar configuration may be better able to help.

  You may be better to ask the support of the manufacturer of the printer wireless itself. However, this http://windows.microsoft.com/en-gb/windows/install-printer#install-printer=windows-7 and its related links gives the general idea.

• How can I get my computer to use my second drive?

  I went to my computer and saw that I have 2 hard drives, each written that they have about 70 GB. Is this really true I have 140 GB in total? If so, how can I get my computer to use my other drive. I'm sorry if I wrote it in the wrong section.

  Hello Mathieu,

  Yes, there is a way, but there are "attacking" the drive so that the computer knows where it is. Who also encourages you to understand how you want to use the drive. Most people put their operating system and programs on a disk, the disk 'C' (C:\BootDrive would be an example) and to put their data on a second disk, the disk "D" files (D:\DataDrive would be an example).

  Once you've got it organized on paper (or in your head), to be labelled and / or format the drive. You can use the mechanism in the post following blue microwave, or you can use the freeware Aomei Partition Assistant application, which will be the ID and label and / or format your drive, according to what is needed. Download the app here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (only use the Direct download link).

  Once installed, you select the drive in question and select Properties, which will tell you the status of your order and options to your need to work with her. For example, if its not allocated, you will need to return it, format it and assign a drive letter. Or he may have already assigned a drive letter and just need to be formatted to be used. Or it may be already in. The program will tell you what you have and what you need to do as your next step.

  Let me know what instructions to proceed to the next step.

  Kind regards

  BearPup

• I can't get my computer to recognize or import pictures from my sony dsc - t77.

  I can't get my computer to recognize or import pictures from my sony dsc - t77. I need step by step... instructions ASAP please!  Joe

  I can't get my computer to recognize or import pictures from my sony dsc - t77. I need step by step... instructions ASAP please!

  =================================
  The following link might be worth a visit:

  Windows 7 - working with the scanner and Camera Installation Wizard
  http://Windows.Microsoft.com/en-AU/Windows7/working-with-the-scanner-and-Camera-Installation-Wizard

• How can I get Photoshop CS5 to recognize the raw files from my Nikon D750. I have crossed on online help, but have not found an action that works

  How can I get Photoshop CS5 to recognize Raw of Nikon D750 files. I went through online help, but have not been able to solve the problem. Graham Atkins

  Hi fathered,

  Photoshop CS5 to read files from Nikon D750 to atleast Camera Raw 8.7 or higher.

  However, I believe that you would not be able to update Camera Raw, so you can download and install the DNG Converter and convert the files to DNG.

  Kind regards.

  Tanuj

• Ho I convert my catalog of items 5 to 13 items that I just bought.  I took one of the tutorials and I converted my catalog of 5 elements in a file 'pse.13db '.  How can I get 13 elements to recognize this converted file?  When I open it Ca 13 items

  Ho I convert my catalog of items 5 to 13 items that I just bought.  I took one of the tutorials and I converted my catalog of 5 elements in a file 'pse.13db '.  How can I get 13 elements to recognize this converted file?  When I open elements 13 Catalog Manager and navigate to the correct location, it does not show the file.  Help!  Thank you

  Hi bumps and Spooley,.

  Would it be possible for us to have a look at the file catalog.pse13db from your machine?

  If the file size is not too large, please feel free to send me by email @ [email protected]. If it is too big, I'll share with you a Dropbox folder where you can download the same.

  Thank you

  Catherine