How can I get my Firefox persona to work with the new version of Firefox?

Similar Questions

• How can I get voice and data to work with the ASA 5505?

  Here's the issue I'm having.   Can I get a Cisco 7940 to work behind one site to another configured ASA 5505 and I can also get data to work behind it.  However, when I try to create a separate Vlan for voice and data, it does not work.  Our voice VLANs on our remote sites are 172.30 and data are 172.31, when I put the inside interface with 172.31 data will work and when I on it 172.30 voice will work.  I upgraded to a security more license and tried vlan3 created as voice.  I have the data to the top and work but I can't get vlan3 to work.   Any help would be greatly appreciated.  Thank you

  Here is my current config:

  hostname TESTvpn
  activate the password xxxxx

  passwd xxxxx

  username admin password xxxxx privilege 15

  name Corp_LAN 10.0.0.0
  name 192.168.64.0 Corp_Voice
  name 172.31.155.0 TESTvpn

  object-group network SunVoyager
  host of the object-Network 64.70.8.160
  host of the object-Network 64.70.8.242

  the Corp_Networks object-group network
  network-object Corp_LAN 255.0.0.0
  object-network Corp_Voice 255.255.255.0

  interface vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  No tap

  interface vlan1
  nameif inside
  security-level 100
  IP 172.31.155.1 255.255.255.0
  No tap

  interface vlan3
  nameif Corp_Voice
  security-level 100
  IP 172.30.155.1 255.255.255.0
  No tap

  output
  interface Ethernet0/0
  switchport access vlan 2
  No tap

  interface Ethernet0/7
  switchport access vlan 3
  No tap

  output

  dhcpd allow inside
  dhcpd address 172.31.155.10 - 172.31.155.30 inside
  dhcpd dns 10.10.10.7 10.10.10.44 interface inside
  dhcpd sun.ins area inside interface
  dhcpd allow inside

  enable Corp_Voice dhcpd
  dhcpd address 172.30.155.10 - 172.30.155.30 Corp_Voice
  dhcpd dns 10.10.10.7 10.10.10.44 interface Corp_Voice
  dhcpd interface of sun.ins of the Corp_Voice domain
  enable Corp_Voice dhcpd
  dhcpd option 150 ip 192.168.64.4 192.168.64.3

  Enable logging
  exploitation forest buffer-size 10000
  monitor debug logging
  logging buffered information
  asdm of logging of information

  outside_access_in list extended access allow all unreachable icmp
  outside_access_in list extended access permit icmp any any echo response
  outside_access_in list extended access permit icmp any one time exceed
  access extensive list ip 172.31.155.0 inside_access_in allow 255.255.255.0 any
  inside_access_in list extended access allow icmp 172.31.155.0 255.255.255.0 any
  Access extensive list ip 172.30.155.0 Corp_Voice_access_in allow 255.255.255.0 any
  Corp_Voice_access_in list extended access allow icmp 172.30.155.0 255.255.255.0 any

  VPN access list extended deny ip 172.31.155.0 255.255.255.0 object-group SunVoyager
  extended VPN ip 172.31.155.0 access list allow 255.255.255.0 any

  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Access-group Corp_Voice_access_in in the Corp_Voice interface

  Global 1 interface (outside)
  NAT (inside) 0-list of access VPN
  NAT (inside) 1 172.31.155.0 255.255.255.0

  Enable http server
  http 172.31.155.0 255.255.255.0 inside
  http 172.30.155.0 255.255.255.0 Corp_Voice
  http 192.168.64.0 255.255.255.0 Corp_Voice
  http 10.0.0.0 255.0.0.0 inside
  http 65.170.136.64 255.255.255.224 outside
  SSH 10.0.0.0 255.0.0.0 inside
  SSH 172.31.155.0 255.255.255.0 inside
  SSH 65.170.136.64 255.255.255.224 outside
  SSH timeout 20

  management-access inside

  dhcpd outside auto_config

  Crypto ipsec transform-set esp-3des esp-md5-hmac VPN
  crypto map outside_map 1 is the VPN address
  peer set card crypto outside_map 1 66.170.136.65
  card crypto outside_map 1 the value transform-set VPN
  outside_map interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  lifetime 28800

  tunnel-group 66.170.136.65 type ipsec-l2l
  IPSec-attributes tunnel-group 66.170.136.65
  pre-shared-key xxxxx

  output
  int eth 0/1
  close
  No tap
  int eth 0/2
  close
  No tap
  int eth 0/3
  close
  No tap
  int eth 0/4
  close
  No tap
  int eth 0/5
  close
  No tap
  int eth 0/6
  close
  No tap
  int eth 0/7
  close
  No tap

  Peter,

  Note that access list names are case-sensitive, so you've actually done something different from what I proposed.

  Please do:

  no nat (Corp_Voice) 0-list of access vpn

  No list of vpn access extended permitted ip TESTvpn 255.255.255.0 everything
  IP 172.30.155.0 255.255.255.0 extended vpn access do not allow any list all

  extended VPN ip 172.30.155.0 access list allow 255.255.255.0 any

  NAT (Corp_Voice) 0-list of access VPN

  In the case where you did deliberately, for example to separate the 2 acl: note that acl VPN (upper case) is also used in the encryption card, where you cannot add a second LCD.

  So if you want to separate you, you will need 3 access lists:

  list of access data-vpn ip TESTvpn 255.255.255.0 allow one

  voice-vpn ip 172.30.155.0 access list allow 255.255.255.0 any

  access-list all - vpn ip TESTvpn 255.255.255.0 allow one

  access-list all - vpn ip 172.30.155.0 allow 255.255.255.0 any

  NAT (inside) 0-list of access vpn data

  NAT (Corp_Voice) - access list 0 voice-vpn

  outside_map 1 match address all vpn crypto card

  Don't know if this was also clearly to my previous message, I recommend you to replace the "all" (in each of the ACL lines) to something more specific (i.e. a remote network, or group of objects that contain the remote networks).

  HTH

  Herbert

• How can I get a dynamic mic to work on the iMac?

  How can I get a dynamic microphone to work via the usb input? Do I need a plug-in?

  Well Yes, if it is a USB microphone, the support is to plug.  Note, Apple provides an Audio configuration and Apple Midi utility in Applications-> utilities that once connected develops on the parameters in the menu-> Preferences-> sound-> entry

  Some microphones require Mac OS X drivers.  It would therefore be important to determine if yours is a.   Google your brand and model micro with Mac OS X and the drivers of Word to see if someone needs.

• How can I get my iPhone/iPad to work with Windows 10.

  How can I get my phone [/ iPad to work with Windows 10]

  Work what?

  Have you downloaded the latest version of iTunes on your computer?

  What exactly do you expect to achieve?

• How can I get my scanjet 4400c to work with windows 7

  How can I get my scanjet 4400c to work with windows 7?

  Site HP says that it is not in the United Kingdom!

  Hello

  Sorry to say no luck, no more support from HP and Microsoft.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=HP%20Scanjet%204400c%20Flatbed%20Scanner&v=HP&UID=C9870A&pf=0

  Kind regards.

• How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

  How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

  Check your descriptor file to make sure that it shows the updated version, too.

• Cannot get card GeForce GTX 560 Ti CUDA to work with the new version of first Pro CC 2014

  In the past, I was able to get CUDA on my GeForce GTX 560 Ti card to work with the Mercury playback engine by adding 'GeForce GTX 560 it' in the file cuda_supported_cards.txt. But with the new version of CC 2014 first, this file is not in the repertoire of Premiere Pro more. Is there a way to get my GTX 560 it be listed as a card support for CUDA with CC 2014?

  So, I thought about it.  I installed the latest graphics driver, and then open the NVIDIA Control Panel.  Here, I've selected "Manage 3D settings" and went to the 'Program settings' tab  I chose Adobe Premiere (adobe first pro.exe) in the list and under the function of "CUDA" - GPU, I changed to "Use these GPU" and selected my GTX 560 it (which was the only one listed).

  After that, I opened the first Pro CC 2014 and selected 'Project Settings - général' and was therefore able to choose "Mercury Playback Engine GPU acceleration" under Renderer (which was unavailable).

  I hope this will help someone else if they encounter the same problem.

• How can I get my copy saved Windows XP with the return to lose all current data?

  I had my PC worked on so I could play better. This tech guy did some work was right but put windows xp pro service pack 3. on this subject. He said it was legal and he went from checking. He did it for about 6 months. I lost my power in a storm and when I succeeded him and pulled upward it did not check my copy of 'registered '.

  Hi Maddmaatt,

  Thanks for posting. A few hardware changes may report a reactivation of your OS. To activate XP as he asks and take the phone option. The helpline can provide you with the new activation keys.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Firefox wants to update (again!) now at version 6. How will I know that my extensions are compatible with the new version?

  I checked with the developer of the extension sites, but they do not yet report if the extension has been tested with Firefox 6.0. 3.6-4.0 switch left me with a gap in functionality of my extensions, although the switch of 4.0 to 5.0 went smoothly. I remember that the installer for 4.0 tested my extensions for compatibility before asking me to confirm if I wanted to install. 6.0, however, says he is already downloaded and just waiting for me to restart Firefox. Mozilla seems to be getting less polite and more aggressive on updates.

  When Firefox starts to install the updated version, it shows you the Add-ons that won't be Compatible with the new Firefox version that is being installed. You can cancel the Installation at this stage.

  I'm not sure about this, but you can also use - Add-on Compatibility Reporter 0.8.7

  • https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/

  Check and tell if its working.

• How can I get windows live mail to work with windows 8.1?

  I keep having to connect and I can't send email.

  Hi danh2os,

  Welcome to the Forums of HP Support!

  I understand that after installing Windows 8.1, you can no longer send emails through your Live mail. I'll try my best to help you with this. To guide you with this, could you please tell me what is the complete model or the product number of your computer.  Here is a guide to How can I find my model number or product number?.

  In the meantime, here's a document for setting up email for Windows 8.1, which should help you to solve this problem.

  Please let me know and I'll be happy to help you with this.

  Thank you and have a great day!

• How can I get Photoshop 2.0 to work with windows 8?

  Installed windows 8 on old laptop and cannot get adobe Photoshop 2.0 to work.  What should I do to use Photoshop in windows 8?

  Hi bg1212,

  Photoshop 2.0 is incompatible and not supported on Windows 8.

  Please buy the new Photoshop CS6.

• How can I activate my iphone I've updated with a new version 9.3 and know its disabled and can not connect thanks

  I was update my iphone with new version 9.3 then you know, I have problem should I sent accept my ID apple and password I try to change the password and everything else cannot accept the apple ID, I think that its disabled for security reasons, but how can I activate I try with iTunes and I sent cloud still work

  Here are two articles that might help:

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

  If none of the options offers a job for you - then align on Apple or a Center authorized repair

• HP Deskjet 3000: I can't get my Deckjet 3000 to work with my new 61XL ink cartridge

  I always bought HP 61 ink cartridges for my printer HP deskjet 3000 and have never had a problem, I recently bought the XL 61 because cartridge that I was printing a lot of things, but every time I put the new cartridge in I get an error message and I don't understand why.

  Hi @Hpierce,

  XL cartridges are certainly more profitable and should work. I understand that you see an error message when you try to use the 61XL, I can help you.

  It seems to me that the issue could be just this cartridge. Please use the following to fix the problem and let me know the result of your efforts: HP Deskjet 1000 (J110) and the 3000 series printers (J310) - a "ink cartridge problem,'"Incompatible print cartridge", or"Ink cartridge failed"Message appears on the computer."

  Please do not forget to keep me abreast of the results, so that I can follow up with you. Thanks, I look forward to hear from you.

• How can I update my old Photoshop CS2 to install the new version on Mac OS 10.10.5?

  Hello!

  I own an older version of Photoshop CS2. I need to install a version of course on my new Mac OS 10.10.5 but the old version will not load and download the upgrade. What can we do? Help please!

  Dominique

  Hi dominiqueK,

  We do not have an option to upgrade to the latest version, as its too old Photoshop CS2.

  You must purchase a new license for Photoshop CS6 or subscription for Photoshop CC 2015.

  As we changed the rules to upgrade to a policy of 'one-version-back' - so that only users with the most recent version can be upgraded. Everyone pays the full rate

  Concerning

  Sarika

• My norton safe identity will not work with the new version of firefox

  How can I solve this problem?

  Hi, please get the update of compatibility of norton: https://community.norton.com/en/blogs/product-update-announcements/firefox-39-support-norton-toolbar