How can I get rid of a group of experts headed "Select Catalog" that appears instead of Lightroom CC when I try to open it?

Similar Questions

• How can I get rid of the practice (news this morning) of messages that appear at the bottom of the Inbox message list when I don't want to see them?

  Until this morning, I could the cursor up and down on my list of the Inbox for messages I wanted to open (or delete without opening). Now, each message darn, the cursor stops on - or sometimes even just past above - appears below the line at the bottom of the list of messages. This means that I can't see so many messages listed at the same time as I could yesterday.
  I can get rid of the line (and the message that open automatically below) only by moving the cursor down on the line. I don't want to do that with every message that I make a break on or exceed. If I want to open a message, I'll open - it is not so difficult.
  I imagine that some people wanted this feature or that it would not have been installed. All I want is to be able to turn it off.
  Thanks for any help.

  Re; I guess that some people wanted this feature or that it would not have been installed. All I want is to be able to turn it off.

  There is no such feature added, because it would be ridiculous to implement.
  The problem you are experiencing is not a problem with Thunderbird.
  It is likely to be your mouse, mouse pad or keyboard.

  Emails do not open without a statement to open. That statement comes from the mouse, mouse pad, keyboard, then this is where to look.

  Either you're inadvertently clicking or your settings are too sensitive or maybe something is stuck, your mouse/keyboard mat is recording your action and act on it.
  Action comes from the mouse or carpets to mouse or keyboard and the computer includes an action is required and performs this action in Thunderbird.

  Determine if what you are doing when it occurs, what method to use and check the settings.

  I would go in your computer control settings to get for example: mouse pads
  and check the settings for sensitivity.

  If you use a mouse pad, it's too easy to press slightly harder and move cursor is interpreted as a left click. Check the sensitivity settings.
  Maybe your keyboard should be cleaned as keys become sticky.
  If you use a mouse, then make sure that your hands are not inadvertently pressing the buttons, the checksensitivity settings or maybe the mouse begins to fail, if not too sentive.

• How can I get rid of this red which impedes my selection tools?

  I just installed 12 items (on a Mac using OS 10.9.5).  Whenever I use the selection tools, I get a red rectangular window that covers the selected area.  This is nothing that I can see and is a disruptive nuisance.  How can I get rid of the $% ^ & & * thing?

  Can you post a screenshot? You will need to come on the forum to do so - it does not work by e-mail. This thread is to:

  How can I get rid of this red which impedes my selection tools?

• The topic branch: How can I get rid of the white lines in a selection?

  I've changed that. Thank you.  Also, I tried to select the images of white on a transparent background.  Do you know how to get the white edges to not show?

  I shared your post in another, as it is a totally different topic. You need to refine your selection by using the tools of edge I refine my selection for masking and selections.

• How can I get rid of the INTEGRATION area who has just started to appear?

  He says he is for web developers, that I am not and do not intend to be. or enter the commands at the prompt.

  There is nothing there that says click here to never show this again.

  You can enable or disable the devtools.toolbar.enabled false on the topic: config page.
  Close and restart Firefox for the changes to take effect.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  The current versions of Firefox have many tools of web development integrated including an inspector and a Style editor.

  • https://developer.Mozilla.org/tools
  • https://developer.Mozilla.org/Tools/Tools_Toolbox#settings
  • https://developer.Mozilla.org/Tools/GCLI

  Note that this toolbar has a command of screenshot that allow to take a screenshot full Web page page.
  Type help screenshot in the command-line of the developer toolbar (Firefox/tools > Web Developer).

• How can I get rid of a popup telling me I have a virus Zeus.  It locks my screen and try to "erase the history and data, etc." does not work.

  I need help with a popup that locks the screen of my iPadAir2.  Go to the setting and compensation history/data does not work.

  If you have deleted the historical data and Safari Web site, and nothing is resolved, the problem is on the wireless router. Check your router wireless for possible violations.

• Page in my MacBook Air will not go away. Online request to call for assistance for Mac. Virus? How can I get rid of him?

  Page I can access through Safari won't go away. Tells me to call a phone number ' 'support for Mac online.' " "Virus? How can I get rid of him?  Cannot use Safari at all.

  Restart the computer and when it restarts hold "shift" when you click on Safari.

• How can I get rid of the Thunderbird message?

  How can I get rid of the Thunderbird message?

  Are you talking about the Thunderbird start page when you start the program?

  In the menu bar, select Tools-Options-general

  Uncheck the first option.

  No Menu bar? Press the ALT key .

• How can I get rid of the second bar blue at the top of my browser window after I open a new window?

  When I open a new window or click a link that opens a new window, the new window has two blue bars along the top of the screen. The top bar is the one that I expect to see with the firefox logo, the name of the Web looking at page and the reduce, enlarge, close buttons. The second bar, below, has a tab orange on the left side who says "Firefox" with an arrow pointing downwards and then on the right side has him minimize, maximize and close buttons. These buttons are the same buttons on the blue bar to the top do. Below the second blue bar is the normal toolbar, but the upstream and downstream buttons do not work. How can I get rid of the second blue bar. He began to appear after the last update I did last week.

  This always happens if you launch Firefox with extensions disabled?

  This page is a report of another user with the same problem, which says that the problem has disappeared after disable the extensions.

• How can I get rid of the annoying voice informing me of every action that you perform on the Mac?

  I was somehow on the voice that informs me of all the actions I perform on the Mac, how can I get rid of him? Help please!

  Sounds like you have enabled the Voiceover feature. Try using the command + F5 combination.

• How can I get rid of the blocker on pogo?

  every time I win extra points or a new badge on pogo, I have a Blocker on the game, I click ok, in the hope that I had the badge or points, this pop-up blocker has three steps that pogo had or has, I got three steps sytem ok, but I still the blocker that always pop up whenever I earn game points. How can I get rid of this pop = up blocker? I know that there are trainers that block unwanted stuff. This isn't the problem, it occurs whenever I get bonus points, or a new badge by playing the games. can you help me or give me an answer?

  Hello

  What is the version of Internet Explorer you are using?

  -Pop-up blocker is a feature of Internet Explorer (IE). You can disable or enable this feature of IE setting.

  Enable and disable the blocker Pop Up in IE:

  Below the article should give you a clear idea on how to use this feature.

  Internet Explorer Pop - Up Blocker: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-pop-up-Blocker-frequently-asked-questions

  (It applies to Internet Explorer 7 and 8)

  Blocker of Pogo

  On the pop up blocker application for what concerns the site Pogo and Pogo games, please take a look at the article below.

  My Blocker may interfere with loading games or leave the Pogo.

  See also this similar thread for more information:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/keep-getting-pop-up-Blocker-message-even-though/6feb89bf-B693-440A-A327-3b01ed1bdb10

  Hope this information helps.

• What is chkdsk /f.? Small happen when I try to defragment, how can I get rid of this?

  When I'm trying to do a disk defragment, I get a message that /f chkdsc.  is planned.  I don't know what it is, how do I get rid of it or go around it, defragment my disk?   Thank you!

  When you try to defragment a volume and Disk Defragmenter reports:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
   
  Please run Chkdsk /f.

  This means that the volume that you want to defragment was marked 'dirty' XP.  This is not necessarily all of the data has been lost on the volume, it simply means that XP thinks that the volume should be checked to find errors because of something that happened before.

  You won't be able to defragment the volume until the dirty bit has been removed.

  This does not mean that a disk check is scheduled to run, and you can't cancel what needs to happen in this case because this isn't the problem.

  Also the dirty bit is not set on a volume, you can still run a disk defrag with a record of date of arrival in the meantime (try).

  Entry of commands to reset or erase a disc awaiting review is therefore a waste of time - that is not the problem.

  A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination.  One of these events?

  When XP starts, it automatically checks the bit of impurity on each volume.  You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed.  If you have a hard drive where the dirty bit will not disappear, you can tell XP not to check.

  If the starting XP detects that the volume is dirty, it will be automatically run the check disk with error correction (chkdsk/r) and try to fix the problems detected.

  If the chkdsk command succeeds, it clears the dirty bit, and then you can defragment the volume.

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Is the volume of your sale or it is not dirty?

  You cannot use fsutil or chkntfs from a command prompt to delete the bit of impurity on a volume.

  The only thing that can clear the bit of impurity on a volume is chkdsk /r (or chkdsk/p).  You could tell XP not to check the bit of impurity on a volume where the dirty bit does not erase, but this probably isn't a good idea since there is some sort of problem on the volume.

  You will be not also solve this problem by editing your registry database (pay attention technical support engineers and moderators of Forum)-is not the problem.

  Once a volume is marked as dirty, the only way to clear the dirty bit is to run "chkdsk/r" or "chkdsk/p" when the volume is not in use.  The only way a volume can not be used while XP is just starting to load or from the XP Recovery Console.

  If XP will not run chkdsk correctly when your system restarts or the dirty bit will not erase as it should, you need to look in the Event Viewer log chkdsk and see what is happening and fix it.

  If XP will not always clear the dirty bit, you need to run chkdsk/r of the XP Recovery Console so you can look and see what works and run it again until it works.  If your hard drive fails, you may never be able to clear the dirty bit, in this case, you can also say XP never check the afflicted volume dirty bit.

  Saying XP not to check the bit of impurity on a volume would be risky behavior because there would always be some kind of problem with your hard drive.

  You can manually program the disk with error correction check to run at the next reboot of the system, but if the dirty bit has been set, XP should run check disk automatically with error correction during the next reboot.

  This is usually the case that after a reboot, the problems will be resolved since XP will automatically run check disk on the Sales volumes when it restarts.  If you do not check that the chkdsk results of newspapers after his execution on a restart, you will never know what problems are corrected or remain.

  When you choose to run the check disk with error correction in the Tools menu of disk properties, you will be prompted with a message similar to the following:

  The disk check cannot be performed because the disk check utility needs exclusive access to some Windows files on the disk.
  These files can be access only by restarting Windows.  You want to schedule the disk check to occur the next time that you restart Windows?

  Answer Yes, if you want to schedule the check disk on the next reboot of Windows.

  When you choose to run the check disk with error correction in the command prompt window, you will be prompted with a message similar to the following:

  The type of the file system is NTFS.
  Cannot lock the current drive.

  Chkdsk cannot run because the volume is in use by another
  process.  You want to schedule this volume to be
  check the next time the system restarts? (Y/N)

  Answer Yes, if you want to schedule the check disk on the next reboot of Windows.

  When XP restarts, let the disc over to check and correct the problems, he could find.  Do not interrupt the disk check.  It can take a long time (hours or days) to complete or they seem to be "stuck".  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  If there is a problem with the chkdsk command that works on reboot and it doesn't really seem to do something (too fast) or not to clear the dirty bit (check the dirty bit again), the command chkdsk which took to restart results in the Event Viewer Application log.  Look there to see what happened.

  When chkdsk runs automatically reboot, you may wonder where to find the results.  The results appear in the Event Viewer Application log.

  You will need to get there after the disk check performed and XP has finished loading for the results and all the problems.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  eventvwr.msc

  Click OK to launch the event viewer.

  Look in the Application log for a proposed Winlogon event, something like this successful race:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Description:

  Checking file system on C:

  The type of the file system is NTFS.

  A disk check has been programmed.

  Windows will now check the disk.
  39070048 KB total disk space.
  25151976 KB in 78653 files.
  48256 KB in 10264 index.
  0 KB in bad sectors.
  237080 KB in use by the system.
  65536 KB occupied by the log file.
  13632736 KB available on disk.

  Windows has finished checking your disk.

  If you see errors - same errors that are corrected, you must run the disk checking with correction of error again (chkdsk/r) until you see no error.  You should have no errors.  Check again the dirty bit.

  If the chkdsk command that runs on every reboot XP does not clear the dirty bit, you must run chkdsk/r from the XP Recovery Console and see if that will clear things upward.  It is a good idea because you can watch chkdsk as it works and see the results on your screen instead of looking in the event viewer connects or wondering what happened (she also just 'feels' better when we see that it works).

  If you have no authentic XP bootable installation CD to boot into the XP Recovery Console, you can create a CD bootable XP (no XP media required) Recovery Console, and then run chkdsk /r manually.

  Need instructions on how to create a CD of bootable XP Recovery Console to run chkdsk/r manually?

• How can I get rid of content advisor asking a unknown password until I can go to any site?

  How can I get rid of content advisor asking a password unknown before that I can connect to what whether?

  Hi Crystal,

  1. are you using Internet Explorer?

  2. If so, what is the version of Internet Explorer installed on your computer?

  If you use Internet Explorer, I suggest to optimize Internet Explorer and check to see if it helps.

  How to optimize Internet Explorer

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Search for Delta. How can I get rid of him

  I picked up something called Delta search. How can I get rid of him?

  Here let me Google that for you:

  http://malwaretips.com/blogs/remove-Delta-search/>

  SC Tom

• How can I get rid of him. I put in Incredimail by mistake and can not get rid of start my

  I thought I wanted to Incredimail, but decided to remove. Now when I go on Google Crome this My from Incredimail appears. How can I get rid of him.

  Hello

  The problem happens on Internet Explorer as well?

  Try to use the fixit to uninstall the program.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  If the problem persists, visit the link to save the query in Google Chrome for better assistance.

  http://www.Google.com/support/forum/

  Hope this information is useful.