can I restart my mac - pro to start from the beginning I / ve he had only 2 days and I think that I / ve screwed it up

Similar Questions

• Xp pro installation gets past the copied installation files and then restarts, rather than continue with install it starts from the beginning again.

  new installation of XP pro on a Dell Inspiron mini

  Xp pro installation went copied files Setup then restarts, rather than continue with an install it starts from the beginning again, laptop is configured to boot from the hd, but does not do that, I reset bios to default and hd settings has been reformatted, the cd for this laptop drive is usb because it has not built in 1... If I try and I remove the usb cd when reboots after copid setup files it told her there is no operating system...

  any help much appreciated...

  Hi, Leon,

  Always include computer make and model, please.  Thank you.

  Research in the Bios (reboot and press F1 or F2 depending on your system, check that all usb options are enabled (for example, USB legacy or support for USB 2.0 devices).)

  If there is a timeout parameter, set it to Max.

  Then, find the boot device priority section

  A USB flash drive, which is usually listed as USB - HDD, but may be listed as a removable device, will have a priority very low start.

  Rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.

  Install Windows XP from USB key

  • Insert the USB key into the USB port on the computer.

  • Open the "I386" folder and find the file "Winnt.exe".

  Double-click on the "Winnt.exe" to launch a command prompt BACK to an installation of Windows XP.

  Type the path of the location of your "I386" folder in the DOS window. For example, if your USB is the letter "D" in your "My Computer" window, type "d:\i386" without the quotes and press the Enter"" key.

  Let the installation program copy the Windows XP installation files on your computer.

  Restart your computer to a command prompt. The Windows XP Setup will continue automatically.

  Follow the on-screen instructions to complete the installation. The program will ask you your Windows XP product key in this process.

  http://www.ehow.com/how_6912418_install-Windows-XP-USB-drive.html

  Make a bootable memory card or USB key using PEBuilder

  http://www.tech-recipes.com/Rx/2583/making_a_usb_drive_or_memory_card_bootable_using_pebuilder/

• I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  Sorry, but you can't activate an iPhone without a SIM card installed. It is simply not possible to do.

• You can change a song somewhere in the Middle rather than start from the beginning?

  You can change a song somewhere in the Middle rather than start from the beginning?

  Hello Gene,

  Currently, there isn't a way to do. It's a great idea and we will certainly look at it later!

  Thank you

  Bronwyn

  Community Manager for first Clip

• Configuration of the AUSST. How can I easily check (Mac) computers are updated from the server AUSST?

  I installed everything according to the recipe. Video Karl Gibson watched this probably five times.

  A server

  Users have AdobeUpdate.Overwrites file in place

  Everyone's updates (couldn't than before by themselves).

  How can I easily see that updates are downloaded from the server AUSST instead of directly from Adobe online?

  I found this on my own.

  The answer lies (on mac) in the/Applications/Utilities/Console

  Look in the sidebar to download Adobe

  DML.log

  Hope this helps someone.

  22/06/14 21:32:13:409 | [INFO] |  |  |  |  |  |  | 2867720 | The download file is http://.local:80/Adobe/updates/oobe/aam20/mac/AdobeExtensionManagerCC-7.0/7.2/setup .dmg

• Audio only plays when started from the beginning?

  Hello! I'm pretty new to Flash, I consider myself a beginner, but recently I've been commissioned to do an animation for someone! There is a song played in the animation, it is a wav and it is on its own layer. There are also drawings that I imported in too.

  My problem is, I want to be able to synchronize the little drawings for the lyrics of the song, but the sound does not play when I starts at 0 on the timeline. If I had to start we are going to say plot of 24, it will not play. Does anyone know how to fix this? This commission must be completed by Wednesday and it's a process S L O W, duty again only to hear as one or two words later

  Change the property to sync (in the properties panel after you click the keyframe where starts your sound) of the workflow event.  Repeat the test.

• only the wallpaper don't start menu icon or start from the beginning. How can I solve this problem?

  This problem happened very suddenly... Everything was fine the day before. Thank you

  It's a good start.

  Think the process explorer.exe as your office.  If it does not work because the file is missing, you will have no office or the taskbar, or start button until it runs, so you need to replace.

  c:\windows\explorer.exe file should never be missing.

  It is even difficult to remove on purpose since it's a protected Windows file.

  You haven't told us your situation Antivirus antimalware software, but I suspect whatever it is (effectively deleted) quarantined your explorer.exe file.

  Since it is a protected file, there should be a copy backup of the file in this folder:

  c:\Windows\System32\dllcache

  or, depending on your installation, you might find a copy in this folder:

  c:\windows\ServicePackFiles\i386

  You must use the Task Manager to click file, new task, browse... and navigate to these folders and search for a backup copy, and if you find the explorer.exe file, copy (Ctrl-c) and paste then copy it (Ctrl-V) in the c:\windows folder where it belongs to replace the missing file.

  Since it should never miss, the backup copy may also be missing, so I put one on my SkyDrive do you can download (sinus your Internet Explorer works) and replace the file c:\windows\explore.exe.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called explore when the name of the file should really be called explorer.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  You could also get a copy of explorer.exe from a working system and copy it to a floppy or USB key and use the Task Manager to browse replace the file (in two places)

  When the file has been replaced, use use the Task Manager to run this command again:

  %windir%\explorer.exe

  (%windir%\System32 is the c:\windows folder)

  How is it now?

  If it looks good, reboot and then run these scans:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Hi I recently transferred my mini iPad iPad pro data now all my game data is lost on both devices. It starts from the beginning of the games. Consedring I played all the games for 2 years, it's really sad. Any advice?

  HI I recently transferred all my data from my iPad to a whole mini new iPad pro. Now all my game data was lost. All of my achievements and waiste game purchases. All my games is in the stages of early on both devices any help?

  Blazeyboy wrote:

  HI I recently transferred all my data from my iPad to a whole mini new iPad pro.

  How do you transfer the data? Do you have the old iPad to backup and then restore this backup Pro iPad? Have you followed these steps?

  Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

• Restart slideshow from the beginning

  I just bought a DPF-VR100. When it is disabled, then it seems to restart the slideshow, everywhere where he stopped the last time. I want to start from the beginning each time. How do I do that? I couldn't find this setting or all instructions in the manual. I have the photos and music in the memory. The photos are classified in the index of the way I want them to appear.
  Thank you!

  Hello and welcome to the forums.
  This is a normal operation. If you turn on the photo frame off the power during the slide show and back, the slideshow restarts from the last image read. Unfortunately there is no adjustment for the slide show restarts automatically after the next power on.

• can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

  can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

  Yes. The only problem that I see if Macs were different countries. The method of payment in the account/ID must be associated with the country where the unit is located and you can only buy Apps from the store of the country where the computers are located

• HP OfficeJet Pro 8710: Scan from the printer to laptop can leave laptop to the printer

  Hi I have problems with the new operating system for sierra on my macbook pro. I can manually scan from my computer to the printer and can print but when I try to scan from the printer, an error message on the printer, that is the counl scan could not be completed, make sure that the computer is connected to the printer and then try again. on the computer, the message is communication Scanner cannot be established make sure your device is turned on check the connection and make sure that your network is working properly if these conditions are correct restart the device and try to scan the image. I just had a llok in HP Utility under the menu fax and scan of the computer is not activated. The message asked me to go to support, but I downloaded the drivers twice and still it will not activate the scan of the computer. What am I missing to make this work.thanks for your help

  Hello

  Scan of the computer can be activated that the current software was conducted before Sierra.

  Software update should be available in the next few weeks to fully support the Sierra, for now just start analysis of your Mac.

  Kind regards

  Shlomi

• I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD.

  Hello Comunity Microsoft :D My name is Mike and I built a gaming pc. Everything was going well for the first 3 days, but now I have a few crashes very violent. Speakers in loop and buzz and screen lock. I have to completely shut down to go back to a working state. I did everything I could possibly think of to solve this problem, but I can't.

  Then. on the problem. Today, I decided that I was able to solve all the problems by reinstalling windows. I had my keys together and put the disc in. I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD. I do and I get normal loading windows files, and at the end of this road, I get the Welcome screen in windows7 with no option and a fat slider. I don't have the little box that tells me that I can fix my computer or reinstall windows, NOTHING. I tried several times and received the same result<--(Insanity: root="" meaning...="" just="" saying)="" so="" i="" called="" windows,="" or="" had="" windows="" call="" me="" rather,="" and="" the="" tech="" says="" she's="" never="" heard="" of="" such="" a="" thing="" happening,="" and="" walked="" me="" through="" all="" these="" steps="" that="" i="" have="" already="" tried....="" still="" no="" help.="" so="" i="" am="" asking="" the="" community.="" has="" this="" ever="" happened="" to="" you="" and="" how="" did="" you="" make="" it="" work.="" and="" please="" don't="" post="" a="" list="" of="" regurgitated="" back="" log="" fix="" lists.="" rest="" assured="" i="" have="" already="" done="" it="" and="" failed="" to="" receive="" a="" different="">

  Just to isolate the problem, try to download a new copy of Windows 7, and then try again:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Regarding problems with the computer itself, try to disconnect all nonessential equipment attached to it to see if the problem persists.

  I would also try switching around components such as modules of memory to see if the problem persists.

  I would also check to make sure that all components are mounted and installed correctly.

• For psc 1315: before you can use this feature, OneNote 2010 must start for the first time.

  I installed the downloaded software (Windows 7) for my old psc 1315 (all-in-in-one). It printed the page sample after installation, but when I want to print what this or else it gives me the following message is displayed:

  "Before you can use this feature, OneNote 2010 must start for the first time."

  Restart the PC does not solve the problem either. How can I get the printer to work?

  Hello pietpompies7

  See the following Microsoft Office Blog article. It deals with OneNote arise while you try to print.

  Microsoft OneNote is misuse of your print jobs?

• ESX 2.5 - How can I confirm if the server is start from the MUI SAN or SSH?

  ESX 2.5 - How can I confirm if the server is start from the MUI SAN or SSH?

  [root@esx011 /] # wwpn.pl
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0

  [root@esx011 /] # wwpn.pl - v
  WWPN 1.02 Copyright VMware 2003
  Display the names of WW and VMHBA ports for fiber channel cards
  For each relevant here are the Qlogic vmhba and names of Port Emulex WW
  Adapter WWPN PCI (decimal)
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0 / proc/scsi/qla2300/2
  vmhba0:0: scsi-qla0-port-0 5005076300c7b4a2 = 5005076300c0b4a2:5005076300c7b4a2;
  vmhba0:10: scsi-qla0-port-10 500507680110b79d = 500507680100b79d:500507680110b79d;
  vmhba0:11: scsi-qla0-port 5005076300cc9561 - 11 = 5005076300 c 09561: 5005076300cc9561;
  vmhba0:12: scsi-qla0-port-12 5005076300c80db4 = 5005076300c00db4:5005076300c80db4;
  vmhba0:13: scsi-qla0-port-13 5005076300cbb0b1 = 5005076300c0b0b1:5005076300cbb0b1;
  vmhba0:1: 500507630308414 d scsi-qla0-port-1 = 5005076303ffc14d:500507630308414 d;
  vmhba0:2: 500507630313414 d scsi-qla0-port-2 = 5005076303ffc14d:500507630313414 d;
  vmhba0:3: scsi-qla0-port-3 5005076300c7b0b1 = 5005076300c0b0b1:5005076300c7b0b1;
  vmhba0:4: scsi-qla0-port-4 5005076300cbb4a2 = 5005076300c0b4a2:5005076300cbb4a2;
  vmhba0:5: scsi-qla0-port-5 5005076300cca01d = 5005076300c0a01d:5005076300cca01d;
  vmhba0:6: scsi-qla0-port-6 5005076300cc0db4 = 5005076300c00db4:5005076300cc0db4;
  vmhba0:7: b 500507680140, 799 scsi-qla0-port-7 = b 500507680100 799:500507680140 b 799;
  vmhba0:8: scsi-qla0-port-8 5005076300cfa01d = 5005076300c0a01d:5005076300cfa01d;
  vmhba0:9: 5005076300 c 89561 scsi-qla0-port - 9 = 5005076300 c 09561:5005076300 c 89561;
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0 / proc/scsi/qla2300/3
  vmhba1:0: scsi-qla1-port-0 5005076300d0a01d = 5005076300c0a01d:5005076300d0a01d;
  vmhba1:10: scsi-qla1-port-10 5005076300cf0db4 = 5005076300c00db4:5005076300cf0db4;
  vmhba1:11: 500507630318414 d scsi-qla1-port-11 = 5005076303ffc14d:500507630318414 d;
  vmhba1:12: 5005076300 c 49561 scsi-qla1-port - 12 = 5005076300 c 09561:5005076300 c 49561;
  vmhba1:13: 5005076300 d 09561 scsi-qla1-port - 13 = 5005076300 c 09561:5005076300 d 09561;
  vmhba1:1: scsi-qla1-port-1 5005076300c4b4a2 = 5005076300c0b4a2:5005076300c4b4a2;
  vmhba1:2: b 500507680130, 799 scsi-qla1-port-2 = b 500507680100 799:500507680130 b 799;
  vmhba1:3: scsi-qla1-port-3 5005076300c4b0b1 = 5005076300c0b0b1:5005076300c4b0b1;
  vmhba1:4: scsi-qla1-port-4 5005076300d0b0b1 = 5005076300c0b0b1:5005076300d0b0b1;
  vmhba1:5: scsi-qla1-port-5 5005076300c4a01d = 5005076300c0a01d:5005076300c4a01d;
  vmhba1:6: 500507630303414 d scsi-qla1-port-6 = 5005076303ffc14d:500507630303414 d;
  vmhba1:7: scsi-qla1-port-7 500507680120b79d = 500507680100b79d:500507680120b79d;
  vmhba1:8: scsi-qla1-port-8 5005076300d0b4a2 = 5005076300c0b4a2:5005076300d0b4a2;
  vmhba1:9: scsi-qla1-port-9 5005076300c30db4 = 5005076300c00db4:5005076300c30db4;
  [root@esx011 /] # vdf h
  Size of filesystem used Avail use % mounted on
  / dev/sda1 3.0 G 2.5 G 364 M 88%.
  / dev/sda3 15G 5.6 G 8.3 G 40% / images
  No 392M 392M 0 0% / dev/shm
  / dev/sda6 23% 424 M 1.4 G 2.0 G/var
  / dev/sda5 7.7 G 81 M 7.2 G 2% /vmadmin
  vmhba0:0:0:1 91 82 G 8.5 G 90% / vmfs / vmhba0:0:0:1
  vmhba0:1:10:1 15 G 15 G 0% 7.0 M / vmfs / vmhba0:1:10:1
  63 7.7 M 63 0% G G vmhba0:1:11:1 / vmfs / vmhba0:1:11:1
  vmhba0:1:1:1 63 63 G 0 100% / vmfs / vmhba0:1:1:1
  vmhba0:1:2:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:2:1
  vmhba0:1:3:1 63 63 G 0 100% / vmfs / vmhba0:1:3:1
  vmhba0:1:4:1 63 63 G 0 100% / vmfs / vmhba0:1:4:1
  vmhba0:1:5:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:5:1
  vmhba0:1:6:1 63 63 G 0 100% / vmfs / vmhba0:1:6:1
  vmhba0:1:7:1 63 63 G 0 100% / vmfs / vmhba0:1:7:1
  vmhba0:1:8:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:8:1
  vmhba0:1:9:1 63 63 G 0 100% / vmfs / vmhba0:1:9:1
  vmhba0:5:0:1 59 G 14 G 44 G 24% / vmfs / vmhba0:5:0:1
  vmhba0:6:3:1 29 G 14 G 14 G 49% / vmfs / vmhba0:6:3:1
  37 G 35 G 1.7 G 95% vmhba0:6:6:1 / vmfs / vmhba0:6:6:1
  vmhba0:7:0:1 499 G 450 G 49 G 90% / vmfs / vmhba0:7:0:1
  7.4 G 7.3 G 180 M 97% vmhba0:9:0:1 / vmfs / vmhba0:9:0:1
  37 G 36 G 1001 M 97% vmhba0:9:1:1 / vmfs / vmhba0:9:1:1
  vmhba0:9:3:1 G 7.4 7.4 G 0 100% / vmfs / vmhba0:9:3:1
  vmhba2:0:0:8 39 G 39 G 29 M 99% / vmfs / vmhba2:0:0:8
  [root@esx011 /] # df h
  Size of filesystem used Avail use % mounted on
  / dev/sda1 3.0 G 2.5 G 364 M 88%.
  / dev/sda3 15G 5.6 G 8.3 G 40% / images
  No 392M 392M 0 0% / dev/shm
  / dev/sda6 23% 424 M 1.4 G 2.0 G/var
  / dev/sda5 7.7 G 81 M 7.2 G 2% /vmadmin
  [root@nbxva011 /] # wwpn.pl
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0
  [root@esx011 /] # cat /etc/lilo.conf
  command prompt
  Timeout = 50
  boot = / dev/sda
  install=/boot/boot.b
  linear
  default = esx

  image=/boot/vmlinuz-2.4.9-e.71smp
  label = linux
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-e.71smp.img
  read-only

  image=/boot/vmlinuz-2.4.9-e.71
  label = linux-up
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-e.71.img
  read-only

  image=/boot/vmlinuz-2.4.9-vmnix2
  label = esx
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-vmnix2.img
  read-only
  Append = "mem = 800M cpci = 0: *;" 1 : * ; 2 : * ; 3 : ; 4:5:0; 7:0; 9 : * ; 10:; 11:; 12: *; 14:; 15: *; 17:; 18: *; 20:; 21: *; 23:; 24: *; 26:; 27: *; 29:; »

  It's client server which I can not restart the server boot or HBA settings view.

  All points will be awarded.

  Thank you

  And in MUI - HBA is not shared with Service Console

• Scan a multi-page document starting from the plateau of HP Officejet Pro 8600?

  Before Windows/7, which I use in 64-bit mode, we had Solution Center HP, which has supported the scanning multipage documents starting from the tray (e.g., scanning several pages of a document linked (for example, a book)) in a single PDF multipage doc.  HPSC has apparently been replaced by HP Scan, et al.  I have a new HP OfficeJet Pro 8600, and there seems to be NO WAY to SCAN SEVERAL PAGES OF A BOOK IN A SINGLE PDF DOCUMENT of several PAGES.  Help me to solve this problem or give me HP Solution Center.

  Thank you

  Jim

  No problem at all. It's understanbable. If you encounter other problems, feel free to ask.