How can I get the full domain name host name
I don't know that it should be easy enough, however I have not had much chance to figure it out myself.
Basically, I have a simple script that gets all hosts in a cluster, and rename the first store of data, of ServerName_Boot, however when I have this, I just can't find a way truncated fqdn hostname just. In this case my hostname IS exactly 14 characters if it helps.
Thanks in advance!
You try to run the split on the host object, not the name itself.
Just update it $Shortname = $VMHostname.Name.Split('.') [0]
Tags: VMware
Similar Questions
-
We are implemented a project with Cisco ISE; but comments Portal appears to users as a "untrusted site". For problems, a public digital certificate must be installed in Cisco ISE, so he can send it to users who enter the comments Web portal.
Now... to sell me the certificate, VERISIGN needs to know settings ISE of the certificate, such as name of area COMPLETE, names subnames, etc... How can these parameters of ISE?
Thaks a lot!
This isn't an easy question to answer, there are a ton of variables to include
Local web site Central Web Auth or Auth
LWA, the WLC is the "man in the Middle" to the request of the customer for PSN (server nodes), the WLC takes the request webauth and resembles webauth then the redirect URL that you put in the WLC
If the redirect webauth URL is https://ise01.mycompany.com:8443/guestportal/login.action, the WLC is a redirect but the virtual IP address comes in 1.1.1.1, who was as trustworthy or redirection complains, then you may have to get the public certificate for the fqdn of 1.1.1.1, and the comment server. You can create a CSR using openssl or you can just enter in ISE and create a CSR, but you can only set CN = ise01.mycompany.com and nothing else, as long you have a single NHP is good, but if you have several Ssnp, you need to change your CSR so that you have to use openssl to create CSR using a file openssl.cnf and then with openssl, you do the following:
openssl req - new - nodes-out openssl.cnf omf-01 - ise04.csr - config
You must do it the way I said above regardless of CWA or LWA, if you have more than one PSN, you must point to a FULL VIP domain name and then configure your DNS to answer for these host names. With LWA, you get virtual IP WLC involved 1.1.1.1, so you don't have to worry about getting a certificate for this, it is a cleaner installation, but you must always do all the rest. It must ensure that users of your guests have the opportunity to join the portal comments and be able to solve the given DNS the dns server that they have been configured with.
Content of the file openssl.cnf:
[req]
nom_distinctif = req_distinguished_name
req_extensions = v3_req
default_bits = 2048[req_distinguished_name]
countryName = name of the country (2-letter codes)
countryName_default = en
localityName = name of the locality (for example, City)
organizationalUnitName = organizational unit name (for example, section)
commonName = Common Name (eg, YOUR name)
commonName_max = 64
emailAddress = Email address
emailAddress_max = 40[v3_req]
keyUsage = keyEncipherment, dataEncipherment
extendedKeyUsage = AutClient, serverAuth
subjectAltName = @alt_names[alt_names]
DNS.1 = guest.mycompany.com
DNS.2 = guest.mycompany.com
DNS.3 = ise01.mycompany.com -
When I click on an address, instead of the name of domain appearing in the url field, only the IP address appears. How can I get the real domain to pop?
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
You can attach a screenshot?
Use a type of compressed as PNG or JPG image to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
-
How can I get the tabs group names appear above the tabs?
At some point the names of all of my tab groups appeared above the tabs. In other words, there is a horizontal list of open tabs on each page. Above that there was a similar list of horizontal search all groups tabs. This horizontal list of tab groups is now missing.
This has been useful to reorganize and re-classification of the tabs into different groups because I could see the entire page for any given tab and could move the tab to another tab group simply by clicking on the tab and dragging to any group in the section tab above the tabs section groups. It's usually easier than reorganization of the tabs on the tab page groups (accessed by clicking on "Your group tabs" icon top right of the screen).
I don't know how this feature got there or why he went, but I liked it.
How can I get that back?I agree. It is a very impressive device available through an add-on that is no longer supported. It would be really useful for me tab groups.
-
How can I get the full mail message header?
Hi guys,.
before that I was able to show full e-mail header by activating an option in Mail preferences, but now it's gone - do you know how to get the full header of an email (for purposes of debugging of course)?
Thank you in advance.
See you soon...
View > Message >
-
How can I get the full url of the page that I catch to navigate?
Hi all
I tried to look for the variable that gave me the information for it, but I was not able to find it.
I am in a jspx as this http://host:port / page.jspx? param1 = value1 & param2 = value2 one,.
Is there an EL expression that can give me the full URL, including parameters? Something like < af:outputText value = "#{request.url}" >
This example does not (obviously), but does anyone know if there is a variable I can access through EL who can provide me with information?
Thanks in advance.#{request.requestURL}
-
How can I get the full menu on my forms editing interface?
Hi people
I have currently only get this menu on my editing of forms in British Colombia interface.
How do I you to the full menu - I think it should look like this: -.
Thank you Cathy
Hi geoff123,
The version of the edition that you see is the most recent interface
If you have access to the high level, you can potentially change this by visiting
http://yoursubdomain.BusinessCatalyst.com/AdminConsoleXT/betafeatures
Uncheck the "New Admin Editor"
However, I would probably stick with the more recent editor and get used to using it.
Nathan
-
Can not get the Google domain name to work with Adobe-accommodation
Hello world
First of all - I am a novice in that kind of stuff so any help is much appreciated, while I watch through this. I am the owner of my domain through Google domains and I try to the host through the Adobe Business Catalyst with my custom domain name: outercoastseafood.com. I changed what I thought was the correct DNS settings in Google, but after waiting 48 hours there is still nothing available. Google settings are:
I also have a Microsoft email account that uses this field which seems to work fine. I looked at the field on intoDNS and got these results: http://www.intodns.com/outercoastseafood.com
Any help or ideas are appreciated!
Thank you
ErikHello
Please remove 1st two records and leave ns1, ns2 and ns3, wait a few hours and it should be good.
unless this is done, use the url to access the site
http://outercoastseafood.BusinessCatalyst.com/Admin/index.aspx
Let me know if you have any question.
-
How can I get the Bus IEEE 1394 Host controller driver to show up in Device Manager?
I try to activate my new Firewire Interface M-Audio Solo and I encountered a small problem.
I recently bought a PCI card on eBay and I hope that it is not defective because even if the blue light on my Solo M-Audio lights when I insert it into the firewire port, I don't see this pop up on my computer screen. In addition to this, I discovered that the Bus IEEE 1394 Host controller is not installed on my computer (Windows XP)...
Can anyone help please?Of my experience with the installation of port expansion cards (USB, Firewire, etc.), they always require facilities suitable driver to work properly. The card comes with an installation disc, or have some sort of instructions for you inform to download the latest drivers for the device from the manufacturer's website?
-
I searched through the 'buttons' available on the screen but can't find anything that relates to this problem, or how I came to this situation in the first place.
Missing the component of records set on the left side of the screen?
In the menu bar select view-presentation-folder pane
No menu bar? Press the ALT key.
If the folders pane is already checked, but do not display, move your mouse over the left margin and look so that it can implement a double headed arrow. When he, left click, hold down and drag to the right to find the folders pane.
-
Get the FULL domain name host name
I'm trying to use Split() to reduce the FQDN down to the host name.
For example:
Get - vm | Select name, @{N = 'ESXi host name'; E = {$_.vmhost.} Split(".") [0]}}
For some reason any my split function returns a white instead of just the host name.
Any ideas?
Thank you!
VMHost is an object, not a string. You must use:
Get - vm | Select name, @{N = 'ESXi host name'; E = {$_.vmhost.} Name.Split(".") [0]}}
-
I'm new to CC. I discovered that I had to download first CS6 in@order to get it. (May not yet know how to get the title templates, etc. cannot understand instructions; but I spread) I see that it still says trial. How can I get the full thing. I am a Subscriber complete cc
I don't know what you've done, but here are the instructions to install the PProCS6 and the callback with a cloud account
Yet the instructions http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html if you have a subscription
- and the difference in the Cloud application manager 2015 https://forums.adobe.com/thread/1906752
Still will not run as a trial, it is enabled when you install and activate PProCS6
-
After a computer crash, I had to load Thunderbird (v31.3.0) in my computer running Windows 8.1, and I managed to import my address book backup file in Thunderbird (v31.3.0).
My problem is that I don't see an option to sort the address book by name of 'Family', which was available with the version of Thunderbird, I had before the crash.
How can I get the address book to sort by the name of "family"?"Address book".
Select address book
"View' > 'Show name as' > last/first". "You can sort by name.
Click on the 'Name' column header to change the sort order,
Reversed, then click on the 'Name' column header again to reverse the order.Or
'View' > ' sort by ' > select 'Name' and 'Crescent '. -
How can I get the clips in record full-time instead of 25 seconds (that they seem to be defined) using windows DVD maker
Hi LorraineDawson,
Here's a walkthough troubleshooting on this issue:
hope this helps
B Eddie
-
How can I get the name of the song I am listening, to see where it says show comes into contact with the song I listen to, it worked before but not now
Please make sure that show what I'm listening is also enabled in Live Messenger itself. See the following screenshot:
http://static.commentcamarche.NET/en.kioskea.NET/FAQ/images/0-BeQo7AgV-John-s-.PNG
Maybe you are looking for
-
My iPhone contacts do not match my iCloud Web contacts
I was going through all my contacts via iCloud.com and noticed they do not correspond with what is currently on my iPhone 6. I show more than 13 contacts on my iPhone on iCloud.com. There seems to be no rhyme or reason to this. Is there a setting I'm
-
Win 8 system tend to be pretty laggy
Hi guys. I just got a computer Toshiba laptop but when I opened it, it is really laggy for a new PC. Someone help me please
-
Is the new Amtel Firmware for the issuance of Pen/digitizer turn HP?
A customer reports and inquires: "there are now an Atmel Firmware upgrade that should help you in the exercise of the feather on your HP revolution. One person at HP with goodness, let me know on this subject. Here is the link: http://h20000.www2.HP.
-
How to acquire with NiScope at different sampling frequencies and lengths Records?
I need to acquire the data of 2 channels of the NI PXI-5114 map two different sampling frequencies high, at the same time. Also, I put 2 different record length. Is this possible? I understand that 'Vertical' settings can be configured for individual
-
Pavillion dv7 2020 ev: PROBLEM of READER SD
Hello, I just switch to windows 8.1 and I tried to use the drivers for the windows card reader 7 and doesn't seem to work, can u please suggest me a solution