Is the new Amtel Firmware for the issuance of Pen/digitizer turn HP?

Similar Questions

• Once you install a new printer firmware for your printer, is it possible to return to the earlier version of the firmware of the printer in case an error occurs?

  Once you install a new printer firmware for your printer, is it possible to return to the earlier version of the firmware of the printer in case an error occurs?

  It may be an option, as long as the error prevents you to connect to the machine. Even so, some firmware update software will not allow a downgrade. This is something that you should go to the manufacturer of the printer for more information.

• New Firmware for the 32TL933 3D LED

  I found at this address 'http://www.dl.toshiba.com/DLY/index.jsp?region=GB&lang=FR', a new firmware for
  32TL933G (G for the other Europe).

  is it compatible with my 32TL933F (F for France)?

  Thank you

  Good question.
  If nobody here can offer you the right answer, I recommend you contact the France Toshiba service provider and ask them. They have direct contact with Toshiba France and can verify this information or perhaps send you a most recent and the most recent update for your Toshiba TV.

  By the way: you have problems with your TV?

• New firmware for the required SSD THNSNC256GBSJ

  Can I get a new firmware for my model THNSNC256GBSJ s/n 51GB50HNK6LK SSD
  8.1 x 64 installed on my Windows System.

  To my knowledge, an update of firmware for THNSNC256GBSJ isn't available.
  But why are you talking about firmware update?

  SSD drive is recognized in the BIOS?
  If so, you don't need any SSD firmware updates to install Win'a 8.1

• Need new firmware for the drive (Mat * un UJDA750)

  I have a Satellite M30 with a carpet * a player combined UJDA750. Anyone know where I could get a new firmware for the drive?

  THX.

  Hello

  I put t know why you need a firmware for your combo drive.
  As far as I know the carpet * a combo UJDA750 driver works with the Windows driver very well.

  Good bye

• HP M251n: Could not find the new firmware for M251n printer

  Can someone give me the link for the latest firmware for M251n? I'm unable to connect to the internet, so to update my Mac.

  Also can´t I see in the HP utility and how you can update the firmware (download of files?).

  Any help would be great

  Hello

  You can download it below:

  http://FTP.HP.com/pub/softlib/software13/COL44535/LJ-108135-8/M251_color_Series_FW_Update-20150212.dmg

  Be aware that the latest firmware has been released prior release of El Capitan and therefore not formally scheduled for the operating system, although likely, it should work.

  If you experience problems when trying to update, try to update from a different computer with an operating system, which means up to Mac OS X Mavericks (10.9) or Windows 10:

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-Pro-200-color-printer-M251-series/5097632/model/5097633

  Kind regards

  Shlomi

• restore the firmware for macbook pro 13 mid 2009

  Hi all! This is my first time using the support community so forgive me for any rudeness and English summary.

  I recently bought a used mid 2009 macbook pro 13 "with no disc on this subject, I installed a new empty 120 GB ssd drive.

  I asked a friend and he has downloaded and made me a usb bootable with osx on it (lion). I instaled the osx and got the macbook running successfully and it was perfect.

  I decide to update and went up el capitan wich sucessfully installed. After the update I tried it out, web navigation simple, when suddenly, out of nowhere the mac stop (much battery left and the led indicator to confirm) and has not started since... when I turn it on the led light flashes and it gives the s.o.s. beep (3 short beeps followed by 3 long beeps and then 3 short beeps) the optical drive made his usual looking noises of boot and the fan continues to spinning, I tried to remove the battery 10 minutes several times and nothing... I read a lot about the problems of ram tested with one stick at a time in the two slots and no improvement... bought a new pair of hynix 2 gb 1066 mhz pc3-8500 ddr3 sticks as recommended for this model and replaced the "old"... did nothing.

  I have no original discs just the macbook itself and the charger. Also tried to boot from the usb drive... not good... tried to start mode revovery... nothing that the black screen and a beep sounds.

  I did some research and read a looooot online and in discussions such as this apple and found it to be the sound warning for bad/corrupted efi rom (as opposed to the majority of people declaring it to be a ram issue) which needs to be restored or flashed... However, apple does not provide or at least I can't find a picture of recovery for my model cd special I know it's the macbook 5.1 (a1278 / emc2254). Is there any solution for this? Please help in some way that you can welcome suggestions!

  Thank you

  Then, you say at the end of your post, you say that it is a MacBook, but it is a MacBook Pro. Check which model you have.

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor - https://support.apple.com/HT201518

  What to do with all these "beeps mean at the start? - http://forum.insanelymac.com/lofiversion/index.php/t62919.html

  Power on self-test beep definition - part 2 - http://support.apple.com/kb/HT1547 - old Macs

  Mac Power on Self Test RAM Intel processor error codes - http://support.apple.com/kb/HT2341

  iMac (mid 2007) and later models: on startup tones - http://support.apple.com/kb/HT2538

• Firmware for the SSD THNSNJ128G8NU

  Hello

  I can't download the firmware for my SDS: THNSNJ128G8NU
  My laptop is a msi Ge72.
  Can you help me.

  Thank you

  I think that this firmware update is not yet available...
  Where new firmware is available, you should find it on this page:
  http://Toshiba.SEMICON-storage.com/e...t-SSD/Hg6.html

• Where to download the firmware for Toshiba 19BL502B TV

  Hello

  Is there a place where I can download the firmware for my Toshiba 19BL502B TV, so that I can install on a USB key and update?

  I've already asked about the firmware that supports Xvid in the forum "New TV model Discussion", but had no luck. As I said in my previous post, the online manual for the machine indicates she has support Xvid, while my paper manual is that the part removed.

  My previous post was:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=134

  And here you see a photo with a comparison of the two manuals.
  I seek to change the firmware of the TV so that it supports Xvid, whether a new firware update or an older one.

  Thank you

  Frank.

  Hello

  Have a look here:
  http://www.DL.Toshiba.com/dly/index.jsp?region=GB&lang=en

  This is the place where you can download the firmware for Toshiba TVs

• Download the latest firmware for Toshiba 40RL838G

  Can someone give me a link where to download the latest firmware for 40RL838G?
  I want to update with the USB (no internet connection available)

  Latest firmware (in the firmware information) is 6.4.0V.1, but TV has 6.1.oK.1 (21.Oct 2011)
  With this firmware, I have problems with the channellist.

  Thank you

  I guess that you won't find it for download.

  The info says:
  Updates to energy efficiency TL838/868 RL838/858
  Energy efficiency upgrades were made to the series RL838/858 both TL 838/868. In order to update your TV with the latest firmware and take advantage of these changes, please follow the methods below:

  * Please note that the TV must have an active internet connection to update the firmware.

  Internet access can be obtained by connecting to the local network or WiFi (using the required WiFi dongle)

  Connection can be confirmed by doing a trial of network connection. This can be done by selecting preferences-> network-> Network Connection Test configuration

  * Method 1: *.
  _Automatic network warning
  When the TV goes to sleep the network SW update is checked on the power on the TV, the following message will appear (after 1-2 minutes):
  A software update is available. You want to upgrade? Yes/No, to update your TV select Yes.

  * Method 2: *.
  _Manual network warning
  In order to make searching for a firmware update anytime TV in time to follow the instructions below:
  Select Setup-> Software Upgrade menu-> Select network update
  The TV will then focus on the network for the new firmware and if possible a update command prompt will appear

  If you need the device to the network

• Can not find the latest Firmware for QX10

  I got an automatic notification that there is an update of firmware for my QX! 0 a couple of days. I did not take in the details then. However when I search the site Support of Sony, it only refers to an update in dated date in 2014.

  Does anyone know the exact URL to get the lates firmware?

  Thanks in advance.

  The latest version of the firmware for the DSC-QX10 is 3.00 released 04 14, 2014.

  You can find the new firmware at: http://esupport.sony.com/US/p/model-home.pl?mdl=DSCQX10&LOC=3#/downloadTab

  Select the operating system of your computer (the update of the firmware is available to run on Mac OS x and any version of Windows XP 8.1.) and click on the Firmware.

• I need the firmware for a chicony cam on Satellite A300-14 s

  I had a lot of problems with my chicony cam on A300 Dungeon of freezing and to stop working so I think that update the firmware, so I search on the net for new firmware and I found one and install it... now my cam isn't working windows can see and it gives the device works but when I try to open Toshiba help cam its says the cam does not work and when I try to open it in PROG like yahoo, nothing happens.
  It s not even power up... so please I need the firmware original please please please...

  Sorry for my bad English :)

  Firmware for cam doesn t exist. What you can do is to install the driver for the webcam.
  What operating system you are using and what firmware you have installed finally?

• Need firmware for Mat * a DVD - RAM UJ - 841S to make the region free

  Can someone help me as where to find a Firmware for Mat * a DVD - RAM UJ - 841-S, the,(MTFOPD-01170000-UN.exe) one i found is for another laptop.

  I need to be able to watch the region 1 and 2 because of me travel and the number of these two that I own.
  I have three options.
  1. install a new drive.
  2 use an external hard drive
  Firmware 3.

  The latest is the one I prefer.
  Can someone help me.

  Hello

  Sorry, but the firmware update will not remove the DVD region lock.
  The fact is that you can change 5 times this option, then the option is locked and it of not possible to change it.
  Unfortunately, there is nothing to see!

  If you wish, you can consult this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=10828

• updated firmware for the clip and clip +.

  Hello

  I have an old Clip 4 GB firmware v 01.01.29A and a Clip + 8 GB firmware v 01.02.15A. I see that these are outdated versions and newer versions are available. I've never updated the firmware, so I was reading the messages to see how. Here's my question; I read that to remove FM Radio you should 'drop' the 'A' in the update. I see that the updates do not have the letter 'A' affixed. This doesn't mean no FM Radio more if I update the firmware for both of the clips? I don't want to lose the radio.

  Thanks in advance for any help

  I wouldn't bother with updating the Clip +. There is very little has changed since the version.15. It's the one I always use on mine.

  No, you won't lose the FM radio by updating the firmware. You must have read some old posts.

• Power failure during the update of firmware for Color LaserJet 2600n

  Just in the middle of the update the firmware for my Color LaserJet 2600n, the power is out. Now I can't get anything to happen on the printer. The screen, or the power lights and the error light, but it does not work when the power is put on. I think that he wiped the previous firmware and either had not started or has been along the way in writing the new info. Is it possible that I can cancel it and reload the original firmware? It hangs on my MacBook Pro running OS 10.6.8. The only thing that the instructions seriously cautioned against a interrupt the installation. Needless to say, this is exactly what happened when the power is out. Any help would be greatly appreciated.

  Randy

  Able to understand me. Has proved to be quite simple. Powered off the printer and turn it back on and represented the firmware upgrade program. The printer didn't restart automatically, so I had to power off and wait 5 seconds before feeding this back. Once he recalibrated itself (which takes several minutes), I was in business.