How can I make an invisible control?
I asked where the front panel is black, most of the controls are invisible. The task is a task 'by pushing the button' - a button on the screen, and the subject is tap it (if it is green) or press no (if it is red). I would like to place an 'invisible' stop button in the upper left corner, so I can click here to stop the application, but want to 'invisible' control while the subject is not press ("oooh, what's this?" ... push...).
What works 'almost' is to change the color of the Boolean control Stop to black. Unfortunately, these nice LabVIEW controls have shading which gives them a nice 3D look and the shading is visible. Suggestions? [I tried a black "square LED", and it's even worse, based on shading, as the Stop button].
Bob Schor
Just it transparent color. It is the 't' in the upper right of the color palette.
It could be more robust to use a combination of keys, given that the end-user can randomly click on the front panel or leave the control visible but require a password to make it work.
Tags: NI Software
Similar Questions
-
How can I make the invisible pencil lines?
I did a lot of changes with the pen tool, and I noticed that the pen lines are a different color than what the form is I did. Is there a way to make these lines of the invisible pen?
Thanks much for any help!
The lines seems to be the limits of your selfmade forms (blue is normally on layer #1). They are invisible.
Check it by pressing the [W] - key---> the lines disappear now?
-
How can I make an invisible button that toggles an icon when you click it?
I am extremely new to Acrobat and Javascript overall, so I'm a little lost. I work with a form that requires that I do several buttons from rocking of the images/formatting in an existing pdf. What javascript would be appropriate for an 'invisible' borderless button or no fill color, in order to define an icon in there when you click on it and remove this icon when you click it again, with the ability to switch back constantly? Thank you very much!
Mark III
There are a number of ways to do this. If you want everything to be autonomous within a single button, you can configure the behavior of 'Push' button and set the icon the mouse down on the non-empty icon and flipping to the icon of the Virgin. You can then place the following code in the mouse event to the top of the button:
Script mouse upward to a button
(function () {}
Get a reference to this button
var f = event.target;
Get the current property of the submitName
var NS = f.submitName;
Toggle submitName property
f.submitName = sn = "" | SN = 'false '? "true": "false";
Set the icon on the Down or reversal icon (empty) defined for this button
var oIcon = f.submitName = "true"? f.buttonGetIcon (1): f.buttonGetIcon (2);
f.buttonSetIcon (oIcon);
})();
This code co-opt little used field submitName property to track the State of the button. (It won't be a problem for the buttons, even if the form is put in place to present it as 'HTML', which is the only time where this property is used.) It extracted the icon below or on the icon to use for the icon overview.
If you don't like that behavior, you can use a button hidden and implemented in the same way, companion setting icon upwards on the non-empty icon and the icon down empty. The key code can then be something like:
(function () {}
var f = event.target;
var F2 = getField ("b2a"); Get a reference to the other button
var NS = f.submitName;
f.submitName = sn = "" | SN = 'false '? "true": "false";
var oIcon = f.submitName = "true"? F2.buttonGetIcon (0): f2.buttonGetIcon (1);
f.buttonSetIcon (oIcon);
})();
In this way, that you don't have to limit a parameter of behavior of Push button.
-
I have an iMac (2015). When I open Garageband, there are only two buttons on the control bar, play and stop. No record button, rewind or ff. Where are they and how can I make it appear?
Try to enlarge the GarageBand window by dragging the corners of resizing.
If she looks like this, your window is small:
You can also try to click the double arrow at the end of the toolbar to reveal more options.
-
You will need to check on a PC with WinXP OpSys PUP. Could DO with Win98 and earlier versions. HOW can I make WinXP let me control BACK PUP? Acquired CNC machines controlled by PRE - Win.XP PC works fine. But Win.XP prevents the PUPPY control via simple BACK and GWBASIC. You want to be able to start/stop all 8 bits of data PUP with BASE and BACK.
Thank you. Jan Rowland
Hey Jan Rowland,
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited in the Windows XP Pro on the Technet Forums.
Post your query in Technet Windows XP IT Pro Forums for assistance on this issue. -
In the area of blur the pins are invisible. I can work with the pins, but I can´t see them. How can I make visible?
Hi ferdinandn
What version of Phtooshop are you using?
Is "View > Show > edit the pines ' activated when you select the blur filter?
Concerning
Assani
-
How can I make YouTube playback buttons and other plug-ins more great because they are so tiny in Firefox? I tried some suggestions dealing with entering "subject: config ' in a fresh browser, but does not. I also downloaded the add-on called "Theme font & size changer", but that no longer works. So I'm reaching here that it was a suggestion that offered another user here.
Ah, Yes, that's - a ultra high resolution (dots per inch) display. It is a known problem in Flash Player, which Adobe is working on fixing.
In the meantime, you can get some videos to have normal size controls from the Youtube HTML5 video player:
In Firefox, go to https://www.youtube.com/html5 and click on the button "request the HTML5 player. -
How can I make several outputs scanned in a single folder? DeskJet 2050 J510
DeskJet 2050 - J510
Windows 7
At present, each image that I scan appears in a separate folder. It's a nuisance for the mutiple image scans. How can I make all the images in one session are displayed in the same fiolde, preferably on my desk?
Hello kayecy
Lets try to reinstall the software. Please follow the instructions below.
1. open Control Panel
2. click on uninstall a program
3 uninstall the Deskjet 2050 in the list
4 restart your computer
5. download and install the latest version of Adobe flash player
http://get.Adobe.com/flashplayer/
6 download the drivers and full software functionality, and then reinstall the printer.Complete software Deskjet 2050 features
Let me know if something changes or if the same interface of shows.
-
How can I make the text bigger
How can I make larger tet
Hello
If you use Windows 7, open windows control panel, open display, click on the radio button 'Medium - 125% ' and click on apply to save the changes.
Kind regards
DP - K
-
How can I make my PC act as a router to connect to the Internet?
How to make my PC act as a router
Hey Microsoft,
How can I make my PC act as a router to connect to the Internet?
Could you please let me know? What should I actually configure the router?See you soon,.
Charel SisouvongHello
You need Virtual WiFi:
You may not have that unless you try to connect to other WiFi devices via your computer and
many WiFi devices and their drivers do not correctly support the virtual pilot.Check with the manufacturer of system and/or support updated real manufacturer Sites and WiFi device drivers.
(Which is also updating the driver virtual.) If no new drivers WiFi are available then re - install the present
one.Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods
below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
found)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
(Those become your fonts of rescue system manufacturer).Repeat for network card (NIC) and is a good time to get the other updated drivers as
Windows 7 like the updated drivers.==========================================================================
More information on what WiFi devices a virtual: (as noted above, if the device or the driver is not
support the virtual device or is not required then it can be disabled).The WiFi device and the driver is installed must support a Virtual WiFi configuration. Check with the system
Manufacturer support, their documentation online and drivers and ask in their forums (if any) known
questions. If the wireless device is supported for OEM sound drivers, visit their site for updated drivers and
known issues (Intel, Realtek, LinkSys and others).Windows 7 adds native Virtual WiFi from Microsoft Research technology
http://www.iStartedSomething.com/20090516/Windows-7-native-virtual-WiFi-technology-Microsoft-research/How to setup virtual Wifi in Windows 7 without any additional software
http://www.Blogsdna.com/5506/how-to-setup-virtual-WiFi-in-Windows-7-without-any-extra-software.htmConnectify allows possibility virtual WiFi in Windows 7 machines
http://www.geek.com/articles/news/Connectify-enables-virtual-WiFi-ability-in-Windows-7-machines-2009112/On the wireless network hosted
http://msdn.Microsoft.com/en-us/library/dd815243 (vs.85) .aspxBuild a Wireless Home network without router - see Windows 7 section
http://www.labnol.org/software/wireless-network-without-router/11494/Transform Windows 7 into Wifi Hot Spot with Virtual Router free tool
http://News.lehsys.com/2009/11/turn-Windows-7-into-WiFi-hot-spot-with-virtual-router-free-tool/=========================================
3rd Party Solutions
Connectify is a software easy to use for Windows 7 computers router.
http://www.Connectify.me/Virtual Router - Wifi Hot Spot for Windows 7 / 2008 R2
http://virtualrouter.codeplex.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
How can I make sure my internet cable works even if the icon is not displayed by the clock
I see the wireless connection icon, but I used to see one for the wired connection also. So where is it?
How can I make sure my internet cable works even if the icon is not displayed by the clock?
Click Start > Control Panel > network and Internet > network connections.
Click with the right button on your Local network, and select Properties. In the window properties of LAN make you that these boxes are checked.
[] Display the icon in the Notification area when connected
[] Notify me when this connection is limited or no connectivity.
Click [OK] and get out of here!
Right-click on start and select Properties. On the taskbar and Start Menu click the taskbar tab, and then click the Customize in front of the Hide icon button inactive and it make sure that the option 'always show' for the local network is selected.
HTH,
NASS - http://www.nasstec.co.uk
-
How can I make the computer asks for a password before downloading a program?
How can I make the computer asks for a password before downloading a program?
Hello
You can configure the computer to request the password when you install any program using the User Account Control (UAC) on the computer. But you will not be able to make windows to ask password when you try to download and program.
You can check the link next on change control settings of user account for more information.
You can use any program of third-party download manager in which you can set a password when you download any file/program on the computer. You can use your favorite search engine to find any Download Manager for the browser software.
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
How can I make the computer sleep after 5 minutes of inactivity on the logon screen?
Original title: How to sleep in the login screen?
How can I make the computer sleep after 5 minutes of inactivity on the logon screen? Currently, on the login screen, white screen, but the computer is still running. Sleeping would save a lot of energy because the computer is used most of the time.
Hi Phil.Ganchev,Using a laptop or a desktop computer?The reason for this question is, if you have a plugged AC adapter you must set power accordingly as opposed to laptop settings battery operated.I suggest you head over to the power settings and create your own power management.a. power by clicking on the Start button, open the Options click on the Control Panel, clicking system and security, and then clicking Power Options.
(b) according to the plan you want to change, click on change plan settings.
c. on the parameters of change in the plan page, choose "Put the computer to sleep" that you want to use when your computer is running on battery (if applicable) and when it is plugged.(Change in 5 minutes for the batteries and sector)Reference:Power plans: frequently asked questions
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
How can I make text bigger in WLM?
* Original title: Windows Live Mail
How can I make text bigger in WLM?
If you want any expansion, go to the control panel and see your options in the accessibility.
-
How can I make my sceen stay on more than a min?
How can I make my sceen stay on more than a min?
Hello
Check these:
How to turn screen saver on or off in Windows 7
http://www.SevenForums.com/tutorials/2111-screen-saver-turn-off.htmlHow to enable or disable password Protection Windows 7 screensaver
http://www.SevenForums.com/tutorials/15322-screen-saver-password-protection-enable-disable.htmlInteresting:
How to restore the energy return Windows screen saver in Windows 7
http://www.SevenForums.com/tutorials/7222-Windows-energy-screen-saver-restore.html--------------------------------------------------------------------------------------------------
Also, check the Control Panel - Power Options - on the left - require a password on Wake-Up - set as desired and other parameters:
These might help:
Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htmHow to solve a problem of Standby Mode Vista and find a Solution - also applies to Windows 7
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlSometimes reset power Plans to default values help and then put them as needed.
How to restore the default settings of the power Plan in Windows 7
http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.htmlHow to change the power Plan settings in Windows 7
http://www.SevenForums.com/tutorials/778-power-plan-settings-change.htmlHow do I change the sleep settings in Windows 7
http://www.brighthub.com/computing/Windows-platform/articles/60294.aspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
4 - 1025TU envy: how to INSTALL Windows 7 on HP Envy 1025TU expenses 4
I'm sorry if my question published or wrong thread & wrong language... Model: HP ENVY 4 1025TU320 GB hard drive4 GB OF RAMThe operating system, it was delivered is Windows 7 / 64 bit / Home BasicIf I want to install the new copy of Windows 7 32/64-bi
-
Replacement OS re-install disc.
I installed a system (Ubuntu) operating different and would like to re - install windows vista. I have lost my disk of Vista. Is it possible that I can get a new drive of the Windows Vista operating system?
-
Is there a difference and practical usage between the host name and the name of the template? I changed the host name on my c7280web page (found via my IP address). This name appears on the page of my network, but also presents itself as a device t
-
We are conducting a slow in connectivity between the clients of the company and the application server in the same company, while working on the application (loading Java Applet by HTTP) server, we disabled parameter receive window auto level control
-
Epson Stylus Photo 950 - Windows 7 64 bit Compatible driver required
Any ideas where I can get a 64-bit for my printer driver.