How can I pair a nokia wireless speakers to windows vista

Similar Questions

• How can I disable smooth edges of fonts with Windows Vista?

  Please, please... I need help from someone obviously smarter than I am. I thought I was just on the pc, but I've proved very obviously I was mistaken.
  I would greatly appreciate any help someone could give me about the following question. I ' v tried the search with the help of Windows Vista, myself, but again, I'm obviously too stupid or slow down and have not been able to find the answer there either. He who can give me the answer, I would be so grateful, I got lov to reciprocate somehow I can, like research, graphics, or any work that I can because that would really mean a lot to me.
  So, here is my question:

  How can I disable smooth edges of fonts with Windows Vista?

  
  
  Bex

  Hello

  I suggest you to return the item and check if it helps:

  ClearType: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/ClearType-frequently-asked-questions

• How can I reset the time and date on Windows Vista?

  How can I reset the time and date on Windows Vista

  http://www.ehow.com/how_2056384_change-date-time-Windows-Vista.html

  http://www.Vistax64.com/tutorials/114989-date-time-change.html

  Read the information in one of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I remove a redundant entry of the Windows Vista 32-bit NT loader;

  How can I remove a redundant entry of the Windows Vista 32-bit NT loader; (The entrance there is an older operating system).

  Hi poomoon,

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If this does not work, let us try to restore your computer to a previous state of safe mode.
  Follow the instructions below to restore your computer to a previous state.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  3. in the System Restore dialog box, click Next.
  4. in the list of restore points, click a restore point created at least a week before the current date, and then click Next.

  Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
  5. click on finish.
  6. the computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  I suggest that you create a restore point before you follow the instructions below.
  How to manually create a restore point?

  1 open the system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  2. in the left pane, click System Protection. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the tab System Protection and then click on create.

  In the System Protection dialog box, type a description, and then click on create.

  You can also try to remove the entry by using bcdedit command in Vista by following the links below.
  1. click on start.
  2. type cmd and click with the right button on cmd.exe to select run as administrator.
  3. Enter the following text.

  bcdedit [{ID}] /deletevalue datatatype

  The {ID} is the GUID associated with the start-up input. If you do not specify a {ID}, the command changes the current operating system boot entry. If a boot entry is specified, the GUID associated with the start-up input must be enclosed in braces {}. To view the GUIDs for all active startup entries, use the bcdedit/enum command.

  For more information, please see the links below.
  http://TechNet.Microsoft.com/en-us/library/cc709667 (WS.10) .aspx
  http://msdn.Microsoft.com/en-us/library/aa906211.aspx

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• How can I get the old search wizard on windows vista/windows 7?

  Original title: bringing research research assistant, new bad engine

  Dear all.

  I like Windows XP search assistant as if worked as an engine of 'real' research, for example, bing, google and search keywords.
  The current one is too basic to windows vista and windows 7 is rubbish and doesn't like the old.

  How can I get the old search wizard on windows vista/windows 7?  If I can't do it, how I'd get that to happen?

  Your

  Tom2020

  HI Tom2020,

  If you want to leave comments about the research, please do so at:

  Windows 7 comments

• How can I delete messages deleted from my computer Windows Vista + Windows Mail

  All old deleted messages are still on my hard drive.   I follow the procedure - deleting e-mail, empty deleted messages.  But all messages that are deleted for the last 2 years by using the 'search' in Windows, all deleted emails - still appear.   I have a used and right click the shred command and it deletes only the body

  and email, including address, remails etc.

  Hello

  rebuild the search index

  http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/

  http://www.TechRepublic.com/blog/window-on-Windows/how-do-i-rebuild-the-instant-search-index-in-Windows-Vista/628

• How can I turn off the screen saver in Windows Vista?

  How, under Vista, disable my screensaver?  I'm trying to update my tomtom gps device and the screen saver must be disabled for me to receive a long download!    How can I disable the screensaver on Vista?

  Hello

  Please contact the Microsoft Community.

  I wish that refer you to this article-

  http://Windows.Microsoft.com/en-us/Windows/turn-screen-saver-on-off#1TC=Windows-Vista

  Let us know if you have problems with Windows in the future.

• How can I create a disc of recovery to windows vista Home premium

  I have a recovery disk, but it is 5 years old and I have to put in loads of two service packs and updates. What I need is a way to make a copy of cassis if anyone can let me know how I can do this.

  Hello

  This recovery disk or using the recovery of the manufacturer provided disk is a feature that included computer manufacturer, not a process from Microsoft.

  And you can't make another a method for the manufacturer to make one which includes updates, etc.

  But you can make an image of everything on your hard drive and save it to a hard drive to reinstall, if necessary, at a later date.

  If you want to make a complete PC Backup or a backup file only, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are other methods where you can borrow a Microsoft Vista DVD > copy it > then wake SP1 and SP2 to it, (no other updates).

  http://www.Vistax64.com/tutorials/151606-Vista-SP1-slipstream-installation-DVD.html

  SP2 info at the bottom of the link.

  See you soon.

• How can I restore my dV7 HP Pavilion with windows Vista back to factory without Vista disc condition.

  I have a Pavillion DV7 with Windows Vista. Im having a lot of problem with my computer and want to just restore to factory settings and wipe it off. How can I do this?

  HP - three ways to recover the PC to original operating status

  Click on the links below for instructions:

  1. If the computer can boot to the Windows desktop, start the Recovery Manager.
  2. At startup, press f11 to start Recovery Manager.
  3. Insert your custom recovery disk or the recovery of the replacement disk, into the optical drive and start the computer.

  To order installation discs:

  HP - order of the recovery disc for Windows

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

• Question: How can I format a PC running pre-installed windows Vista?

  I would like to format my PC because of the problems I've been as blue screen errors.

  I bought a PC pre-installed Windows Vista and I don't have the DVD of windows.
  Question: How can I format the hard drive?

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I fix error Code 800706BE on my Windows Vista?

  My computer has installed an update and I got an 800706BE error Code on my Windows Vista computer.

  How can I fix it?

  Make sure that your anti-virus is off and try again the update, if it still doesn't work, try updating in a clean boot environment:

  Test in a clean boot environment to see if the problem is related to other services or programs-

  How to troubleshoot a problem by performing a clean boot...
  http://support.Microsoft.com/kb/929135

• Mode of continuous reboot after an unsuccessful attempt, how can I return to a functional version of windows (Vista or 7)?

  I tried to upgrade to Windows 7 Vista SP1 from a disk of retail bought at Costco.  I received an unsuccessful installation and everything seems to be ok with a rolling Vista.  I woke up this morning to my system stuck in reboot mode.  I can't even Windows Safe Mode to work.  What can I do to get back to Vista?  I promise you that I'll never try to update again... Please help.

  Hi HelpPleaseWindows7,
   
  Thanks for visiting the site of Microsoft Windows Vista Community!
   
  (1) remove any external devices like floppies, CD, flash, printers and computer DVD drives and restart.
  (2) If this helps not to start your computer, use the Vista installation cd
  (3) try to get the error message by disabling "auto restart in case of system failure"

  If you have a Windows Vista installation disc:
  Insert the installation disc.
  Restart your computer.
  Click the Start button, click the arrow next to the button lock and then click on restart.
  If you are prompted, press any key to start Windows from the installation disc.
  Note
  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  (BIOS WARNING):
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk).
  Choose your language settings, and then click Next.
  Click on repair your computer.
  Select the operating system you want to repair, and then click Next.
  In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
  If the Startup Repair tool is an option of recovering preinstalled on your computer:
  Remove all floppy disks, CDs and DVDs from your computer and restart your computer.
  Click the Start button, click the arrow next to the button lock and then click on restart.
  Do one of the following:
  If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.
  In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).
  Select a keyboard layout, and then click Next.
  Select a user name and password, and then click OK.
  In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Follow this link for more information: http://windows.microsoft.com/en-us/windows-vista/Startup-Repair-frequently-asked-questions

  Perform the system restore
  Follow this link: http://windows.microsoft.com/en-us/windows-vista/Turn-back-time-on-your-PC-Undo-system-changes-with-System-Restore
   
   
  I hope this information helps!
   
  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• How can I get my laptop to format with windows vista ultimate?

  I used the windows + P keys and it did not work...

  Hello

  ·         What do you mean when you say format?

  ·         Format in Windows Mobility Center are you referring?

  ·         Windows Mobility Center are you referring?

  I suggest you to see link below and check if it helps.

  Adjust settings before giving a presentation

  http://Windows.Microsoft.com/en-AU/Windows-Vista/adjust-settings-before-giving-a-presentation

  I also suggest to display returned with the required information so that we can help you better.

  You can also see the article:

  http://support.Microsoft.com/kb/555375

• How can I buy a new product key for Windows Vista?

  
  

  I bought a copy of Vista ultimate 64 bit edition on Ebay and discovered it had already been used.  The seller said it was new and not open, but it was not.  I would like to buy a new product key for it, but have been unable to do this using Microsoft procedures on the internet. How to buy a new product key

  Try Amazon: http://www.amazon.com/s?ie=UTF8&keywords=Windows%20Vista&rh=n%3A229534%2Ck%3AWindows%20Vista&page=1#%2Fref%3Dnb_sb_noss%3Furl%3Dsearch-alias%253Dsoftware%26field-keywords%3DWindows%2BVista%26rh%3Dn%253A229534%252Ck%253AWindows%2BVista&enc=1

  Could not find Vista on the MS Store is or that they make it very difficult to find.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How can I recover my recycle bin deleted in Windows Vista Home Premium? Delete all I have is not there

  I'm trying to recent files that I deleted, but nothing is in the trash. There no way to know where there is, or to recover any deleted in the last two weeks?
  Concerning
  Luis Silva

  Hello

  ·          Basket works the way it is supposed to be?

  ·          Remove you items permanently using SHIFT + DELETE key?

  You may use data recovery software to recover data if it is not found in the trash.

  Online search using your favorite search engine to get it.

  DISCLAIMER of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.