How can I perform a factory reset on the portable series Aspire V5 - 571P? I am running windows 8 pro.

Similar Questions

• How can I do a factory reset on windows p7-1414PC 8.1

  A breakdown of current and the restoration resulted in a power supply damaged. Supplu has been replaced by a computer Tech.

  Computer turns on.  Receive the error code File\BCD message 0xe0000098, Boot Configeration data file

  no signs for an operating system.

  Do you have a system recovery procedure, the same error.

  How can I do a factory reset?

  Bought a CD of Windows 8.1 and windows reloaded 8.1 which fixed my problem.

  Thank you

  Big_Dave wrote:
  

  Hi herb,

  I am very surprised that computer technology has not corrected other problems since the it had replaced the power supply and should have the knowledge necessary to get you up and ongoing enforcement.

  Read this publication articlefor your PC on the conduct of HP recovery.

  If you do not have a set of external support of HP recovery, then you should consider ordering a set of HP as soon as POSSIBLE, you might have other issues that may require external support.

• BlackBerry Smartphones how can I perfom a 'hard reset' on the 4.3 version < OS from my BlackBerry?

  Hello world

  I recently encountered a problem on the 8800 and 8300 models, but more generally on all models, this version of the OS is older than the 4.3. Indeed, I noticed that the Wipe of the device functionality is not efficient enough to have your device in a clean state. For example, I have this app that I can't get rid of even after that I did a wipe on my device.

  There is also the /resettofactory command, but as explained in this article (http://www.blackberry.com/btsc/documentLink.do?externalID=KB17215), it does not work on peripheral models this version of the OS is less than 4.3. So my question is:

  How to perform a hard reset on the device that the version of the OS is less than 4.3?

  Thanks in advance.

  Well well... your original post not mentioned that you had used the WIPE command in JLCmder, you did mention the Resettofactory command. They are not the same.

  I used successfully both JLCmder and JavaLoader wipe devices both less and more than 4.3. I don't know why it does not work for you.

  So... you're saying that even if you clean the machine using JLCmder or JavaLoader, this a rest app?

• HP 7612: HP7612 Locked - how can I perform a full reset?

  Without apparent reason, one of our HP7612 has posted locked by Admin and most of the functions are now disabled and showing that the locked. How can I reset it to clear this locked status and return our config network completely?

  Hello @Karonia, greetings!

  Thank you for reaching us on the forums of HP. I'm happy to help you

  I will send you a private message with the steps to perform a reset on your printer. Please check your mailbox icon in the upper right of this page to view the message.

  See you soon

• How can I do a factory reset on my HANNSPREE 7 windows

  factory reset, how can I do

  You see the frequently asked questions on the Hannspree web page (http://www.hannspree.eu/), send a note to their help desk or read the documentation that is installed on your PC.

• BlackBerry Smartphones how can I do a factory reset without going into the blackberry software?

  Hello

  My Blackberry Curve 8520 I just "App Error 523".

  Whether the bust means that I have to do a FACTORY RESET, but I was wondering how to do this without using the Blackberry Desktop software?

  I wonder if the blue keys inside Blackberry anything on this subject.

  What blue keys inside?

  You'll need a Windows PC. Period.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Congratulations! Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.

  BlackBerry Device Operating System downloads: http://www.blackberryforums.com/blackberry-device-specific/
  Simply select the model of the device in the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

  *****************
  IF the above does not work or help, you need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  Download JL_Cmder http://www.blackberryforums.com/rim-software/18789-jl_cmder.html
  or download BBSAK http://bbsak.org/download.php

  If JL_Cmder does not work, you can try this:
  KB10144, http://www.blackberry.com/btsc/KB10144
  and this: KB20371 http://www.blackberry.com/btsc/KB20371

  Additional information:
  http://www.BlackBerry.com/BTSC/KB24395 "Error 523", "App Error 523", or "JVM 523" is displayed on the BlackBerry smartphone

  Item number: http://www.blackberry.com/btsc/KB10144
  KB10144 how to force detect the BlackBerry smartphone using the Application Loader

• How can I perform a partial reset on a 6500 all-in-one

  OfficeJet 6500 E710n-z (2A98C5), 10.8.2 - OS Maac, my printer don't always work after he falls asleep. I have to turn it off and then turn it back on again. I was told at one point to perform a partial reset, but I forgot how to do this.

  Thanks, I perform operations that you mentioned, but the problem kept recurring. I finally didi contact an HP technician who was extremely friendly and helpful, even though my printer is no longer under warranty. {technical info removed for security}

• Can not do a factory reset of the preinstallation directory

  Hello

  I have a portable Satellite Pro L450D I bought there a little more than 12 months. It has an AMD Sempron processor - Windows 7 Home Edition - 32-bit of the system.
  My problem is the laptop computer has become so slow, it became impossible to use. I have Kaspersky Internet Security 2010 installed from when I bought last year (definitions up-to-date).
  I looked in the task under the tabe of Performance Manager and the CPU usage is always 100%, even when it is not used; No apps or progs running in the background, NOTHING!
  I decided to do a new reinstall from the pre-install directory that came with the laptop, but no matter how many times I stop and start upward and press F8 for advanced options, it gives everything except one that allows to select repair the system. It is simply not there at all to select. I have a picture of the screen to the BACK, but this forum seems to not allow the photos to be attached and uploaded.

  Also when it starts normally (by default) HDD CD player - opposing the speedy BACKS see the:
  Windows 7
  Windows 7

  The first option in Windows 7, when selected will bring me in Windows quite slowly. The second option, Windows 7 takes me for one start of another? Not sure what it is, but it reports an error saying the device is inaccessible and watch something '00000000c' error number?

  My question is how can I get the laptop to give me the 'Repair' option when I select F8 at startup for advance settings. I'm stuck. This happens even with the repair disk that I created in the trunk of the drive and bios of the DVD, locate the DVD drive first to initialize to the value top!

  Any help or assistance will be appreciated.

  PS: I also bought a Toshiba Satellite A660 64 bit Windows 7 Home Premium to i5 processor about 6 months ago and that works beautifully except recently the Toshiba "HDD/SSD Alert" warns my drive is about to fail. but that's a separate topic regarding send it to for replaciement in car under warranty - I already backed up all the files and images of laptops from booth.

  Kind regards
  SilverTosh

  Hey,.

  The exact HARD drive recovery procedure is described here:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  If you don t have the opportunity to find your laptop, you need to use the Toshiba recovery disc but I can't imagine you don t have that option on the recovery disk too

  If you start from the recovery disk what is exactly happening and what options get you? Normally, after having started from the recovery disk, you get a screen where you can select the recovery option and you must confirm that all will be removed to restore the out of the box settings.

  You see that?

• My hp touchsmart computer windows vista did not build in the score, how do I perform a factory reset?

  I tried to do a restore to factory on my computer but the frame in the score which is supposed to be there is not there at all so it didn't work. She asks a disk but when I bought my computer I never received one, is there anyway you can help me? Thanks for your time.

  Read more about my first answer for you.

  They are your remaining options to reinstall.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can also contact HP and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista."

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  «How to activate Vista normally and by phone Activation»

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How can I perform a hard reset on a Palm Centro?

  I installed a third party-thrower and want it removed, and I don't know how. If there is another way to take off this launcher, could you tell me? If this isn't the case, I need instructions for a Hard Reset.

  Thank you

  Ramiro.

  Nevermind, I found the answer. Thanks to all those who were getting ready to answer!

  Message relates to: Centro (Sprint)

• How can I do a factory reset my DMS 5.1

  Hi guys! :

  I have a 5.1 DMS for the demo and each time you change a demo do you different configurations for devices. It there a way to do a factory returned to DMM and video instead of the portal is to remind every change that you did? I really appreciate your help! Thank you!

  Karla,

  I'm sorry.  I talked place. VMware images must be used for

  internal use only.  Images VMware cannot be upgraded.  You must have

  the VMware install disks for each DMS version.

  So it looks like a new installation will be required whenever you want to do

  a demo for another client or simply remove what you have configured

  for prior client or set a demonstration model to use for all customers...

  If you need to get the iso image for 5.1 do fresh installs, please

  Contact your local sales team Cisco or an account representative.

  Thank you

  T.

• The administrator account has disappeared from my computer running Windows XP Pro. How can this happen and how can it be solved?

  I don't see that the clarification would help.

  To retrieve the getting started welcome screen (in fact, many people want to know how to get the system to the way you have it, on the contrary), see--> http://windowsxp.mvps.org/noautologon.htm

  Out of curiosity, use the command control userpasswords2 described on the link above and look at the list of users.

  You should have:

  • each account you created
  • an account named Administrator
  • an account named ASPNET; and
  • an account named comments

  You have these accounts?  Specifically, you have an account named Administrator in more the one named Admin?

  All Windows XP installations have a built-in account named Administrator.  This account should normally be reserved for emergency cases and therefore, is hidden in the home in normal mode screen once you have created your own user account (I don't remember if you have created an account with computer administrator privileges user, or if the creation of a user account allows to hide 'Administrator').  Although it is possible to rename the built-in account, doing so is not easy and not a good idea IMO.

• I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.

  You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.

  copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• How can I get a factory recovery disk or the Windows XP support?

  Original title: support for Windows XP?

  How can I get a factory recovery disc or support for Windows XP for a HP Media Center Desktop PC M7067C? I'm trying to rub the PC, so that I can donate. It will not start now. I had no media or can't find it. Computer was shipped loaded with s/w.

  Thank you
  cmp_ms

  I think this is what you need:

  Performing a recovery system (Windows XP) HP