How can I put names of files with my screen saver pictures?

Similar Questions

• How can I play flac Audio files with extension on windows media player

  How can I play flac Audio files with extension on windows media player

  Hello jesskenneth,

  Thank you for visiting the Microsoft answers Site.

  The extension Flac is not a type of supported Windows Media Player file. However, you can user your favorite search engine to search for a solution that can convert the file in a supported file type Windows Media Player.

  For more information on the types of files supported by Windows Media Player, you can also view the following link:

  Information on the types of media files that supports Windows Media Player

  Thank you

   

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• How can I get data (txt file with data from the 5 sensors) in a graph?

  I have a txt file that reads

  time, data1, data2, data3, data4, recentes5, yes/no

  example:

  0,450,427,421,480,622,0
  4,561,513,478,466,540,0
  8,547,531,510,492,515,0
  12,528,524,513,495,525,1
  36,531,524,515,505,534,1
  65,537,528,519,511,539,1
  

  Where the last song realates to a buzzer

  I need a chart that shows all 5 data point (so a graph with 5 lines)

  How can I do this?

  Also, is there a way to show the Yes/No part in LanView?

  Here it is:

  

  It's very simple.

  1. open the text file in a spreadsheet file.  You can connect a control of path or if left blank, it will prompt for a path.

  2. set the comma as separator.

  3. display the values on the graph.

  I just added a digital table indicator so that you can see the values as exactly those of the file.

  

  To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

• HP Jet 11 X 360: How can I put a 11 flow with the anniversary of 10 Windows Update?

  I know that Windows Update is unable to do so.  I think that the media creation tool box.  But I would like to see a pointer explicit instructions that are considered as complete, effective and safe by HP.

  As I did now successfully upgrade, I'll follow upward in describing my experience for someone else who cares about this and found this thread.  The short version is that if you can free 8 GB of storage, the media creation tool can do the upgrade and it requires no additional storage at all.

  I had the intention of putting it off until I learned more.  However, to my surprise, Windows Update downloaded the "update" and indicated that he wanted to install it, but had difficulties regarding disk space.  Contrary to what kyle_b said, he suggested, pointing to the extra storage space, and I pointed to a 32 GB SD card which had plenty of room.  He proceeded to create a 3 GB $WINDOWS. ~ TMP file on it.  After that, he tried the installation.  Which failed.  When I hunted that in history all the update I could find is a statement that was not without any explanation.  I was not surprised, because I had heard that Windows Update is unable to do so.  What surprised me, is that she is never even committed to do in the first place on the machine so attached to the disk space that he could not work.

  I thought it was too stupid to stop trying and it would be a chore, and if I had better go ahead and see if I could make it happen with the creation of media tool.  I had to tinker with removing some stuff and uninstalling programs to get my unused space up to 8 GB.  Then I made a few support upward to another computer on my LAN to a few files, that I couldn't afford to lose, and I've been duped on this other computer for awhile.

  I came back to the computer laptop, downloaded media creation tool, and it began.  He balked, saying: I do not have enough free storage.  Indeed, I discovered that I had more free 8 GB!  Windows Update has downloaded the "update" (about 3 GB) again for the update of the anniversary.  It took me a while to find that.  So I just deleted the download of the update folder to return at least 8 GB free.

  I tried again the media creation tool, and everything went well.  Surprisingly, he didn't need additional storage next to the 8 GB that was free on the main drive.  (For example, I plugged never in any USB stick or SD card.)  Also amazing after you delete the files needed to get back to the old version of Windows, my disk space is now up to 10 GB.  That is, I actually took a little space.  Not what one would expect.  Apparently MS has managed to remove some fat.

• Help! How can I call the Matlab file with toolbox (matlab 7.1) in labview 8.6?

  Hello

  I developed a file matlab to optimize a system, it's Toolbox. Entries should be in Labview but also the outputs should be included in the labview graph.  The results include arrays. CVI is not installed. My labview is version 8.6. MATLAB is version 7.1.

  (1) is the version of labview and matlab questions in this problem?

  (2) what is the best solution? Matlab script? DLL? Active X?

  (3) if I could use matlab script, I define the type of each variables in labview, including those of the code?

  Thank you!

  Jessie

  Step 1: Learn patience. This forum provides no immediate technical assistance. It is composed mainly of volunteers, and most of us have full-time jobs.

  (1) is the version of labview and matlab questions in this problem?

  Not really.

  (2) what is the best solution? Matlab script? DLL? Active X?

  Any of these will work. If you want to use the script, then you must use the Matlab Script node. This allows you to enter the Matlab code directly in the node, or you can call scripts that you have on your file system. This method requires that you have MATLAB hand whole on the target computer. If you create a DLL Matlab, then you use the node library function call and call the DLL as any other DLL. This method simply requires that you have the Matlab Runtime on the target computer.  I assume when you say that you're referring to writing your own ActiveX ActiveX component?

  (3) if I could use matlab script, I define the type of each variables in labview, including those of the code?

  I don't know what you mean by defining each variable type. You need to create the entries and exits on the Script node Matlab, so you can pass data between LabVIEW and Matlab environment. The help of LabVIEW contains more information on the use of the Matlab Script node. There are also some examples with LabVIEW.

• How can I back up my files with storage external wiitnh windows 8

  I have an external new hard cell drive(back up) I want to use to make my backups. It is a toshiba and want to know nhow I get my files on support. I have connected it to my computer laptop bjut I still don't see anything on the backup again. Thanks Len

  Hello

  Please follow this link

  http://support.HP.com/us-en/document/c01817236

  Note with the user only windows backup will be saved the files selected from the respective location...

  You can always copy past data on the external drive and save it...

• How can I put a video file local mp4

  I need to take a local video file (mp4 or other standard format) and place it in a page to run locally during the export.

  The exported site should have this file mp4 as a local treasure and must play locally without an internet connection.

  If this is possible then I can use the MUSE tool for my students, they can use the MUSE.

  Help, please

  Tim Brady

  Please visit the sites:

  How to integrate a mp4 video in my muse site.

  https://www.YouTube.com/watch?v=zTtNQ6SHkqg

  Thank you

  Sanjit

• Hello! How can I convert a psd files with levels of text in PDFs into editable text? I should be able to edit the pdf files converted (from psd) with adobe reader. Thank you!

  I would like to convert psd to pdf files into editable from the current levels of photoshop text. After that I'll convert psd to pdf, I should be able to open the PDF with adobe reader and change the text.

  If anyone can help me I would really appreciate that cause its really important for me can thought to it.

  Thank you very much!!

  Gaia

  Hi gaiar402796,

  All changes will be possible using Acrobat application.

  Using reader you will not be able to make any changes.

  Kind regards
  Nicos

• How can I play mpeg-4 files with Windows Media Player 11 on my PC - XP SP3

  I downloaded a file from YouTube and I would like to play the video with Windows Media Player.  My PC is running XP service pack 3.  I downloaded and installed Windows Media Player Version 11.  The file is Shawn Woodman.mp4

  Long answer... good luck...

  The following decoder could be your problem but it's not freeware.

  3ivx decoder
  http://store.3ivx.com/3ivxStore/product_details.php?ID=11

  Anyway... This article is maybe worth a visit:

  Multimedia Windows Media Player (316992)
  file formats
  http://support.Microsoft.com/kb/316992/en-us
  > scroll waaay to MPEG-4 (.mp4)

  Media players free alternative that should play MP4 files:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  Media Player Classic
  http://www.filehippo.com/download_media_player_classic/

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Apple Quicktime
  http://www.Apple.com/QuickTime/Download/
  (there is a free version and a paid version)

  QuickTime Alternative
  http://www.filehippo.com/download_quicktime_alternative/

  And it might be worth a try to download
  and install 'one' of the following free codec packs:

  * Proceed at your own risk *.

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/

  CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  Windows Vista-
  System Restore:
  Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Personally I would remove the compatibility
  questions and convert the files to the WMV MP4
  format. One of the reasons being... If the files are shared
  with anyone... they will encounter the same problems.

• How can I move all my files with the exception of windows to another drive?

  Hi, I have recently built my new PC. I have a 120 GB SSD and a 1 TB HARD drive. I have already installed windows 7 on my SSD and some programs installed on it. When I installed more programs on my HARD drive, program files, and other files stored on my SSD economy. Now I have files for the same program on two separate discs. I don't want that. I would like to have windows itself on my SSD and keep my user files, program files, and everything else on my HARD drive. If anyone knows how to do this, their help would be greatly appreciated.
  Thank you, Cooper

  Change the default save location,

  http://Windows.Microsoft.com/en-us/Windows7/customize-a-library

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Win7-how-do-i-move-user-folder-to-a-different/565f16a5-e5ed-43C9-8422-4f56aebb296e

  http://www.bbearren.com/

• How can I put several psd files in a publication in AE?

  I have a scene in a publication Setup and I am eager to make another psd file in the same composition and I can't seem to understand.

  If the position of the layer is important, then the second PSD Import as a composition to maintain the size of the layer and then open the new comp and select all the layers in the timeline panel, switch to your original composition and paste. It would be the easiest way.

• How can I view a pdf file with a single page first, then of two continuous pages?

  can someone please help?

  I am trying to view a pdf of the 8 page, as it will be printed.

  1st view = cover page

  2nd view = 2 and 3

  3rd = 4 and 5

  view 4 = 6 and 7

  View 5 = back

  Thanks in advance

  Check "See the cover Page during two" under display - display of the Page.

• How can I make a JPEG (email) in a screen saver?

  have a pic on an e-mail attachment; would like to make in my screen saver (it's jpeg)

  Hello

  See the following articles for more information:

  To use the photos as a screen saver

  To set or change a screen saver

• How can I put shortcuts to websites in a bar (?) tool bar/browser... dunno what it's called. With IE, I can just drag the tab of the site to the area I want.

  How can I put shortcuts to websites in a bar (?) tool bar/browser... dunno what it's called. With IE, I can just drag the tab of the site to the area I want

  Near the right end of the address bar is a White Star which can be hard to see, but look closely. When you want to add a shortcut to the toolbar, double-click the star. A window opens with the name of the Web page. Under this is the area of folder which will probably read "Unsorted Bookmarks". Click on the drop down arrow and change it to "Bookmarks Toolbar", then click done.

  I have several folders on my toolbar such as music, Mail, etc. in which I add several Web sites. If you want to add a folder, click on the second drop-down arrow next to "Bookmark Toolbar" and click on "New folder" and give it a name.

  To add a bookmark to a folder, once again double click on the star, make sure you're in the bookmarks bar and click one of the fall of two arrows to find the name of the folder.

  For other bookmarks use Menu bookmark. What is added here are accessible through bookmarks in the menu bar. If your Menu bar with bookmark, file, display, etc. is not visible, click the ALT key and they will become visible. To keep the menu bar, click view, toolbars and check the menu bar.