Show/hide of a player template; Workaround solution?

Similar Questions

• Wmvcore.dll should use primers, but Windows 8.1 will not allow Windows Media Player.  Workaround solution?

  Just as the title suggests, it does not load Primer CC because it requires the wmvcore.dll.  It tells me to install Windows Media Player and Windows media player is not available for this version of windows.

  Is there a solution for this?

  Thank you all for your time.

  I found the solution.

  I am running windows 8.1 N

  And apparently, you will need to download a "feature pack" which has all the goodies inside this Prime Minister needs to operate.

  I * think * I got mine here: http://www.microsoft.com/en-us/download/details.aspx?id=16546

  The computer had to reboot so I lost the original page.  But you get the idea.  This fix worked for me!  Good luck to someone else in need.

• Show/hide buttons based on templates

  Hello
  
  1 is in any way to hide and show a button (the button style model based) dynamically?
  
  2. If the button is an image (Image button style) is anyway to hide and show a button dynamically?
  
  Thank you!

  Hello:

  I'll assume that you want to hide/show a button using javascript.

  In General, if the button model has the sting of substitution ' #BUTTON_ATTRIBUTES # ' set, you can specify an attribute 'id' to the button in the button attributes of the button definition field. For an image based button you specify and 'id' in the attributes of the picture field. You can then display or hide these buttons using the

  $x_HideItemRow ("") and $x_ShowItemRow ("") built in javascript functions.

• DW: Show-hide layers

  Hey, I am having two problems with behavior show - hide layers in Dreamweaver and I was wondering if anyone else has had the same problems and has a solution.
  
  My test page is http://www.petermcphee.com/dreamweaver/popup-layer.html
  
  (1) what I would like is to show the layer when the link is hovered over, which works very well. However, I also want the layer remains visible when the mouse passes over the layer and disappear when the mouse leaves the layer.
  
  I googled for a while and found some tutorials that deal with show/hide layers, but they hide the layers once the mouse leaves the original link, not the layer.
  
  (2) in addition, the site I want to apply this behavior to a an auto centering wrapper, box, so I would layer to the right of the pop-up window under the link every time without converting them the entire site Absolute positioning. As it is now, the popup appears in different places depending on the width is my browser.
  
  Is this possible with the current functionality of DW?
  
  Thank you very much!
  
  Peter.

  > 1) what I would like is to show the layer when the link is hovered over,
  > who
  > works very well. However, I also want the layer to be visible while the
  > mouse is
  > over-the-top and disappear when the mouse leaves the layer.

  When you view the layer, also show an underlying layer that contains a
  GIF image transparent who is the subject of more large/more grand than the layer 10px you
  See the property. Apply a layer of skin behavior to the GIF image which hides both the
  you have just showed and the underlying layer of the layers. Skin mouseout/mouseouthandler()
  the original trigger event. Who is?

  (> 2) in addition, the site I want to apply this behavior to a car
  > centering
  > wrapper, box, so I would layer towards the good popup under the link
  > each
  > time without converting the entire site to absolute positioning. As it is
  > now,.
  > is the popup appears in different places depending on the width of my browser.

  -Change

  on this subject.

  
  

  -change

  on this subject.

  
  

  and this-

  on this subject.

  
  
  

  and see if that helps.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "petertyler" wrote in message
  News:f1a45m$7jv$1@forums. Macromedia.com...
  > Hey, I? m in both problems with the behavior show - hide layers in
  > Dreamweaver
  > and I was wondering if anyone else has had the same problems and has a
  > solution.
  >
  > My test page is http://www.petermcphee.com/dreamweaver/popup-layer.html
  >
  > 1) what I would like is to show the layer when the link is hovered over,
  > who
  > works very well. However, I also want the layer to be visible while the
  > mouse is
  > over-the-top and disappear when the mouse leaves the layer.
  >
  > I googled for a while and found some tutorials that deal with
  > show/hide
  > layers but they hide the layers once the mouse leaves the original link.
  > not
  > layer.
  >
  (> 2) in addition, the site I want to apply this behavior to a car
  > centering
  > wrapper, box, so I would layer towards the good popup under the link
  > each
  > time without converting the entire site to absolute positioning. As it is
  > now,.
  > is the popup appears in different places depending on the width of my browser.
  >
  > Is still possible with the current feature of DW?
  >
  > Thank you very much!
  >
  > Peter.
  >

• Where the control to show/hide the removable storage settings

  I try to install Win 8 Prof.  I have a HP desktop with a CD player and 4 slots for removable media devices.

  In a previous installation, there was a way to show/hide the removable drives / slots unless there was inserted media.

  I don't know where the setting.  I tried the

  strategies group without result.

  I also lost the capacity of my office to recognize and attach my CD player.  It appears in Device Manager, but he said he is not physically attached.

  I can boot from the drive.

  Help, please.

  Have you installed Windows 8 or you try to install it?

  I use Windows 7 on my PC and in that, the option "Hide or show empty leads in computer folder" is located in the view tab of the window "Options records". It should be the same in Windows 8 as well.

  Visit this link:

  http://www.SevenForums.com/tutorials/6969-drives-hide-show-empty-drives-computer-folder.html

  If Windows 8 will not detect the device, try the steps in this link:

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

• Show/hide menu based on the logged in user

  Hello

  12.1.3 Jdev

  I want to show/hide some menu items based on the logged in user.

  I will explain the current design:

  In my application, I created a menu as below. (It is created using 'Create or Update ADF Menu' file adfc_config).

  ibis_menu. XML

  <?xml version="1.0" encoding="windows-1252" ?>
  <menu xmlns="http://myfaces.apache.org/trinidad/menu">
    <itemNode id="itemNode_home" label="Home" action="goHome" focusViewId="/home"/>
    <itemNode id="itemNode_transaction" label="Transaction" action="goTransaction" focusViewId="/transaction"/>
    <itemNode id="itemNode_customer" label="Customer" action="goCustomer" focusViewId="/customer"/>
    <itemNode id="itemNode_upload" label="Upload" action="goUpload" focusViewId="/upload"/>
    <itemNode id="itemNode_profile" label="Profile" action="goProfile" focusViewId="/profile"/>
    <itemNode id="itemNode_serviceRequest" label="Service Request" action="goServiceRequest"
              focusViewId="/serviceRequest"/>
    <itemNode id="itemNode_report" label="Report" action="goReport" focusViewId="/report"/>
  </menu>
  

  I have a navigation pane in my Pages that use this menu as below:

  <af:navigationPane hint="bar" id="np1" value="#{ibis_menu}" var="menuInfo">
                          <f:facet name="nodeStamp">
                              <af:commandNavigationItem id="ni1" text="#{menuInfo.label}"
                                                        destination="#{menuInfo.destination}"
                                                        action="#{menuInfo.doAction}"/>
                          </f:facet>
                      </af:navigationPane>
  

  Now, I want to hide some items on the menu, depending on the Type of user loggedIn. I have the userType stored in the managed bean.

  How can I get this feature.

  An approach which I think is as below:

  Define a variable for each itemNode in a managedbean(session scope) and who associate with the property ' visible ' / ' rendering ' of the itemNode in the Menu xml.

  Please let me know is a good way to do it or is there another solution better?

  See you soon

  AJ

  So, maybe this can help:

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/48-sitemenu-protection-169190.PDF

• Avoid complete when page is rendered dynamically show/hide elements in a page

  Hi experts,

  
  I use Jdev 11.1.1.5. My use case does not show/hide multiple buttons/panelBoxes on the same page.

  My approach is to define the rendered property pointing to a session variable

  <af:panelBox  rendered="#{sessionScope.render_panel1}"
  <af:commandButton action="#{backingBeanScope.myBean.configureRenderButtons}" rendered="#{render_button1}"/>
  

  .. .and go to the same page by using an action method in a managed bean:

  public String configureRenderButtons() {
     JSFUtils.storeOnSession("render_panel1", "true");
     JSFUtils.storeOnSession("render_button1", "false");
     ...
    return "same-page.jspx"
  }
  

  My problem is that I noticed that this full page is rendered whenever I press the button. So as soon as the page has grown in size, it became a bit slow for end users.

  Could you please advice on this?

  Kind regards

  Jose.

  I got the solution.

  I changed:

  (1) changed to visible, rendeded

  (2) partialSubmit added to the button

  (3) partialTrigger added to the component I need to show/hide (panelBox)

  (4) action changed to actionListener

  Hope this helps (and hope it's a good practice, please post!)

  Jose.

• Problems with the layout themed to show/hide the region 25

  Hi all, Ive hit another question that I hope someone can help with...

  APEX 4.2.4 on XE... Theme 25.

  I've reproduced this login as apex.oracle.com [email protected] password newpass 291 3 application page.    (admin/admin is also implemented as a UN/pw)

  I have a skin region see the this Im using as a region of select query. There are a number of boxes, and a couple of display only fields that have values returned in it.

  I I set out them in a row, and after 3 items, I start a new line with the other 3 articles... that is

  X X X

  X X X

  Except that with the region set to show/hide and the model of the value without tab, no sidebar I get.

  X X

  X

  X X

  X

  If I change the standard region it works OK, and if I change models, it seems ok.  Ive tried all the combinations of columns, etc, but nothing helps...  Im trying to figure out if Im missing something, or I've hit a bug any... (almost certainly the old...) ...

  Thank you very much indeed

  Richard Legge wrote:

  I have a skin region see the this Im using as a region of select query. There are a number of boxes, and a couple of display only fields that have values returned in it.

  I I set out them in a row, and after 3 items, I start a new line with the other 3 articles... that is

  X X X

  X X X

  Except that with the region set to show/hide and the model of the value without tab, no sidebar I get.

  X X

  X

  X X

  X

  If I change the standard region it works OK, and if I change models, it seems ok.  Ive tried all the combinations of columns, etc, but nothing helps...  Im trying to figure out if Im missing something, or I've hit a bug any... (almost certainly the old...) ...

  The difference between the models of the region is that the Standard region has defined Points of view and the show/hide does not work. This is the mysterious properties that Oracle has not yet bothered to document. Their omission of this model is indeed likely to be a bug.

  Create a copy of the region show/hide template and add a point of view for the body of the region (content):

  Name: Body of the region

  Substitution of template: BODY

  Grid Support: Checked

  The maximum fixed grid columns: - 1

  
  

  Use the new model to show/hide for the region of select query.
  

• Show/hide the buttons of different page

  Hi all

  I was responsible for creating an interactive PDF of several page which is basically a questionnaire. Each page will have one question with the results of all issues gathered in a table at the end. Ideally, I would like to answer each question to send to a cell in a table but I can't find a way to get there, so my solution was to use radio buttons to select the buttons for results and responses. I had planned to assign an action show/hide radio buttons to reveal the answer on another page. During testing I ran into a problem when you configure the action show/hide, it allows me to select a show/hide button, unless its on the same page as the option button! Does anyone know if there is a solution to this? If someone can not advice me how I build such a feature?

  Thanks in advance,

  JS

  In Indesign, you will need to install the buttons in response to the same page as the radio buttons for the construction of all hide / display the activations. It's the only way you will be able to set these properties. Once you have completed and tested, you can now move the buttons in response to another page. Option buttons to activate hide/show buttons to answer to a different page. I have a test file that shows, if you want, I can send it to you.

• Hotkeys to show/hide the tool Options and the Photo to PSE11 tray

  LOL - I just find it has shortened F4 to show/hide the xD Tool Options
  Overall I have disabled "Auto Show Tool Options" option and use F4... Thanks Adobe you have not left it without no solution!

  Title of the message was edited by: Brett N

  And have you tried F5? You will soon use the F4 and F5 to clear your display

• Remove "show/hide TOC" in iframes

  I use RH9 to generate webhelp and uses iframes on almost every page of my project and thus I need to divide the pages in coloumned tables.

  My problems:

  one) I want users to have access to the table of contents and glossary, I created, but the mess of navigation page to the top of my alignment of the table. The obvious solution is to hide the table of contents by default at startup, but none of the tips I found (including Peter Grainge) to modify the js files to make this work for me. The best I could do is settings use webhelp HR integrate the show/hide text at the top of each page.

  (b) Unfortunately, the text to show/hide appears in each topic in the IFRAME, as well as on the pages of the main topic. Users who click on these links in an iframe lose the window of the main topic.

  Then, I can hide the default navigation getting started page and can I selectively incorporate a text to hide/show on the pages, except those iframes? I don't mind doing so manually if necessary. I understand that I could place the subjects I want to display in outdoor iframes to the project, but I would rather not since that affects the portability from one server to another.

  Thanks for any help. John

  Hi John,.

  To hide the navigation page, follow these steps:

  (1) before generating the output of WebHelp, exploring to the! SkinSubFolder! folder in your project folder and open the skn (to be used in the output) file in a text editor and modify it to , as shown in the screenshot below:

  

  (2) the output and observe that this navigation page must be hidden by default.

  If you want to insert to show/hide only selected topics, I'm afraid you must do it manually.

  For letting us have the best overview of your condition, you can also share a sample project with the necessary details such as your desired output.

  Please perform the following steps to share the project-

  1. click the button register to sign up for a free account at http://acrobat.com.
  2. Once you log on to your account, download the project.
  3. once the project is transferred, please share with us.
  (File sharing option is available in the lower left corner of the page as an option for specific files).

  I hope this helps.

  Thank you
  Aditi

• layers - show/hide, positioning and models

  I want to show an image in a table when I rollover a navigation button image.
  Images of navigation buttons have been implemented with the swap image restore behaviors, and I also want to display an image related elsewhere on the page but also simply by changing the button image.
  The obvious solution seems to be to use layers for each of the images I want to view, and then show/hide the appropriate reversal. The problem is that I do work for lack of problem of the layers being absolute and therefore change position if the browser window is resized etc.. I thought about layers of nesting, but the site uses a model that prevents me to implement a global layer on the position at the breast.
  If I try to use the layer relative positioning I get a problem the layer "overlay each other" they disappear in the layer list Dereamweaver shows as available in the list of show/hide behavior.
  I have not attached any code that I'm really looking for a little advice on how best to address the problem, I hope that there is a much simpler way to do this.
  Thanks in advance

  mainplus wrote:
  > I want to show an image in a table when I rollover a navigation button
  > image.
  > Images of navigation buttons have been implemented with swap image restore
  > behaviors and I also want to display an associated image elsewhere on the page as
  > as well as simply by changing the button image.
  > The obvious solution seems to be to use layers for each of the images I have
  > want to view and then show/hide the appropriate reversal. The
  > problem is that I have make it work without problem of the layers being absolute and
  > so change position if the browser window is resized etc. I thought about
  > the layers but the site nesting uses a model that keeps me from
  > establishing a global layer on the position at the breast.
  > If I try to use relative positioning layer I get a layer problem
  > "overlap between them", they disappear in the layer list which
  > Dereamweaver shows as available in the list of show/hide behavior.
  > I'm not attached to any code because I'm really looking for a little advice regarding
  > the best way to approach the problem that I hope there are many more
  > straight forward to do this.
  > Thanks in advance
  >

  Rather than using layers and as your site appears to be table-you
  might try this tut...

  http://www.DWfaq.com/tutorials/basics/disjointed.asp

  you might find other tuts - just google "disjoint bearings.

  HTH

  --
  Chin chin
  Sinclair

• Show hide within a repeat region

  I am trying to apply a show - hide a div within a repeat region.
  
  The problem is that only the first record of the repeat region seams to work properly, on all other theres no such think as hide. Why?
  
  Here is the link:
  http://www.Cantinho.org/admin/Cantinho/find_search_result.php
  
  Hope someone can help me here.
  
  
  Thank you
  
  
  

  In the doors pop music: "The End."

  We will make a summary of it:

  OBJECTIVE OF THIS POST 'WHOLESALE ':
  Make a show/hide button details within a repeat region, so when the user clicks on this button the details of this specific record inside the repeat region appear and disappear. (alternating).

  WHAT DID NOT WORK?

  1)
  PROBLEM:
  The effect (in the menu effects of dreamweaver), despite the fact that we click on toggle option, it switches at all.

  SOLUTION:
  It is a known bug in the Spry effects.js file. We need to update the .js file so the .js can switch.
  Download here: http://www.cristic.ro/samples/SpryEffects.js
  Thank you sailor.

  2)
  PROBLEM:
  The effect only occurs on the first record, nothing happens on the other!
  SOLUTION:
  Joris sugestion:
  Apply a php counter.

  PROBLEM 3):
  The initial state of the 'details' div is the SHOW, but we need them to HIDE. (to view the details, only when user whats to see).
  SOLUTION HAS FAILED:
  Apply a CSS like this:
  

  Why? (don't know, maybe because we cannot apply a name dynamic div inside a CSS or maybe because I don't know how to do)

  A SOLUTION THAT WORKS:
  Suggested by Joris again:
  Apply to the special div eatch that you want to hide (since we have a repeat region it will be only)
  and apply to this div style = "" view: no ' property. "

  Thank you very much!!! JORIS! REALLY!
  Thank you for your time, your patience and your lessons. :)

• What is the best way to show/hide n number of columns?

  Hello
  
  I have a dynamic report that I have show/hide columns works using the code below. But when there is 500 or more lines, that it takes about a minute or more just waiting to see the columns that toggle.
  
  What is the best way to do it?
  
  Existing JavaScript
  [script language = "JavaScript" type = "text/javascript"]
  var mymonths.length = maxcnt;
  function hideMaxEarn() {}
  for (var j = 0; j [maxcnt; j ++) {}
  hideColumn('MON'+mymonths[j],'MAXCOL'+mymonths[j]);
  hideColumn('MON'+mymonths[j],'EARNCOL'+mymonths[j]);
  }
  hideColumn ('MON13', 'MAXCOL13');
  hideColumn ('MON13', 'EARNCOL13');
  }
  function showMaxEarn() {}
  for (var j = 0; j [maxcnt; j ++) {}
  showColumn('MON'+mymonths[j],'MAXCOL'+mymonths[j]);
  showColumn('MON'+mymonths[j],'EARNCOL'+mymonths[j]);
  }
  showColumn ('MON13', 'MAXCOL13');
  showColumn ('MON13', 'EARNCOL13');
  }
  function getCellIndex (pRow, pCell) {}
  for (var i = 0, n = pRow.cells.length; i [n; i ++) {}
  If (pRow.cells [i] == pCell) return i;
  }
  }
  function hideColumn (pMon, pCol) {}
  var l_Cell = $x (pCol);
  var l_Table = html_CascadeUpTill (l_Cell, 'TABLE');
  var l_Rows = l_Table.rows;
  l_CellI = getCellIndex (l_Cell.parentNode, l_Cell);
  for (var i = 0, n = l_Rows.length; i [n; i ++) {}
  If (I! = 0) {}
  html_HideElement (l_Rows [i]. Cells [l_CellI]);
  } else {}
  $x (pMon) .colSpan $x (pMon) .colSpan = - 1;
  }
  }
  }
  function showColumn (pMon, pCol) {}
  var l_Cell = $x (pCol);
  var l_Table = html_CascadeUpTill (l_Cell, 'TABLE');
  var l_Rows = l_Table.rows;
  l_CellI = getCellIndex (l_Cell.parentNode, l_Cell);
  
  for (var i = 0, n = l_Rows.length; i [n; i ++) {}
  If (I! = 0) {}
  html_ShowElement (l_Rows [i]. Cells [l_CellI]);
  } else {}
  $x (pMon) .colSpan = 3;
  }
  }
  }
  return;
  }
  [script]

  Hi Bill,

  Can you just check to see if the report actually adds the ID attribute for each TD. In a normal report, if you include the ENAME field, for example, all TD in this column have an ID = "ENAME". If this is the case, you can use document.getElementByID ("ENAME") to retrieve a collection of these - this would be faster browse this collection through the rows/cells.

  In addition, if possible, you should only perform research and calculations once. You have mymonths [j] several times in loops - create a variable to hold this for each iteration of the loop and refer to the variable. You also n = l_Rows.length in loop definition - put this above the loop that you only need to calculate this time.

  You can also find more efficient to perform ObjectName. style.display = 'none' * instead of the html_HideElement() method as it is easier.

  If FF3 was a bug in which does not hide the NECK tag columns, I suggest using those rather--it would mean the creation of a new report template, but it would have been the quickest method as you can style an entire column to style her NECK tag (drawback, it's that the NECK tag cannot be created dynamically so it should appear in the report model).

  Andy

  Published by: ATD 26 Sep, 2008 15:03

• I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  Is attached a screenshot of my screen with the context menu to show/hide tabs. I want to delete some of them and let others. Please help me to know how. Thank you!

  Hmm, maybe this "one-time" imported into the new preference? Try this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cust and make a pause so that the list is filtered

  (3) double-click the preference of browser.uiCustomization.state and the content must be highlighted in a small dialog box.

  (4) copy the whole line and paste it into Notepad and save it as a backup.

  (5) in Firefox, click on the button '3-bar' menu > developer > Notepad. Remove the comment that appears and paste data preferably, that must appear on a long line. Click on the "Pretty Print" button to make it more readable.

  So I hope that you can spot the extra toolbars and change them out, taking care to preserve the commas between the elements.

  I don't have the extra toolbars in mine, but I copied and pasted back this spaced format and Firefox was able to handle it well. I went into customize and moved a button, and when I left, Firefox has rewritten the preference set as a single line. Assuming that yours works fine, then you can get rid of the backup from step (4).